- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule NON SKIVE for hoses hydraulic rubber with a braid spiral type 4SP, 4SH, R13 and R15. Use only with appropriate fitting hydraulic NON SKIVE od this the same supplier. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule type L Intended for crimping fittings type hydraulic (fittings as for hoses high-pressure type Z) in hoses industrial (rubber and plastic of reinforcement textile, optionally of spiral reinforcing - hoses suction - delivery). ferrule should select taking under attention diameter inner Dw and external Dz hose. length ferrule L not should be greater od length tail fittings Lk. Diameter D1 - Diameter outer. Diameter D2 - Diameter inner. Diameter D3 - Diameter lock. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, semi-transparent, flexible hose with rubber silicone vulcanized platinum. used in industry pharmaceutical, cosmetic and biotechnology, equipment medical, culture cells, sterile lines filling, for water for injection (WFI), in chemistry and analyzers blood, in chromatography liquid. It can be used in pumps peristaltic – moderate service life. is characterized exceptionally smooth surface inner prevents deposition and adhesion contaminants inside hose and growth bacteria. facilitates to total cleaning and sterilization hose. smooth Layer inner reduces also resistance flow through hose. low extractability, not toxicity, not hemolyticity and not pyrogenicity ensures total cleanliness liquids we sensitive use. Meets the requirements of hygienic American FDA 21 CFR 177.2600, NSF-51, 3-A and USP CLASS VI and ISO 10993 for contact with blood, fluids body and tissues for 30 dni. possible sterilization steam (30 min, 1 bar, 121°C), oxide ethylene or radiation (for 2.5 Mrad). length full roll hose 15 m. hose Available in sizes inch and metric. pressure working determined relative to pressure bursting at factor safety 1:5. Material: silicone (platinium). Maximum Operating temperature: +204°C. temperature brittleness: -80°C. Hardness: 50° Shore (A). Density: 1.14 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDevice intended for machining finishing ends pipes po cutting (removal burrs with outer and internal edge). intended for pipes made both of carbon steel as and steel stainless. Maximum Diameter tubes: 42 mm. Voltage: 230 V. Moc: 0.18 kW. speed: 50 obr/min. weight: 30 kg.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality thin-walled hose type BARRIER for flow freon in single braid polyester for use in automotive and industrial systems air-conditioning and refrigerant working based on freon R134a, R1234yf, R404a Suva MP52 and R22 oils mineral and synthetic PAG, POE and PVE. Layer outer resistant to abrasion and conditions atmospheric. standards: SAE J2064 type C Class I. Inner layer: black rubber CR divided layer nylon (PA). Reinforcement: a polyester braid. Outer layer: black rubber CIIR, micro-perforated. Working pressure: 35 bar. Operating temperature: od -35°C up to +125°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction - delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE), black – white type MARBLE (marbled), smooth, antistatic (R 6 Ω). Layer inner is resistant to most acids and bases and many other aggressive chemicals (in elevated, ale not very high temperatures), co makes, that hose is Widely used in industry chemical and petrochemical. Layer inner with UPE type MARBLE is also compliant with requirements for hoses food, is characterized also low a coefficient friction during flow and prevents deposition medium on walls. facilitates to significantly cleaning and allows on use also in industry cosmetic, pharmaceutical and food. Reinforcement cord synthetic and spiral steel. Layer outer with resistant chemical rubber EPDM, antistatic (R 6 Ω), resistant to abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:11 (type Ω/T, completely antistatic (R 9 Ω) - ensures discharge charges electrostatic also through wall hose, co allows on use we all zones hazard explosion. standards and requirements: hoses chemical: EN 12115:2011(type Ω/T). industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU, FDA 21 CFR 177.1520 (c), D.M. 21/03/73. atmosphere explosive: directive ATEX (zones: 0, 1, 2, 20, 21, 22), EN 50014/ IEC 60079-0. assembly: should use fittings with spigot („tail” for hose) smooth, not having sharp or high barbs, which could po clamping cut or damage layer inner with UPE. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Inner layer: white-black polyethylene UPE. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Inner layer: white-black polyethylene UPE. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: from 12 bar to 16 bar - depending on the diameter hose. Operating temperature: od -35°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal, strong and very flexible rubber hose delivery, intended for air, water and light chemicals. It can be used for dispersion water paints epoxy and polyurethane. Not is suitable for oils, fuels, hydrocarbons aromatic, paints cellulose, chlorinated-rubber and other containing solvents aromatic (e.g. toluene, xylene) or gasoline. When selecting for chemical applications we recommend contacting Tubes International. Inner and outer layer antistatic (R 9 Ω/m), Layer outer resistant to ozone, aging and conditions atmospheric. Inner layer: black EPDM rubber. Reinforcement: textile braid. Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: od -40°C up to +100°C (momentarily +120°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for automotive systems brake. made in accordance with the standard DIN 74310, is characterized high resistance on abrasion. Layer outer resistant to ozone, aging and conditions atmospheric. Inner layer: black EPDM rubber. Reinforcement: high-strength a synthetic braid. Outer layer: black EPDM rubber. Working pressure: 10 bar. Operating temperature: od -40°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose with increased service life relative to the standard. Confirmed hose service life of 400.000 pulse cycles. standards: EN 853 2SN, ISO 1436-2SN, SAE 100R2S-AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 80 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +120°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose used in systems pneumatic, hydraulic, lines tool, robots industrial, etc. Resistant to abrasion, solvents, fuels, hydrocarbons. Retains flexibility at low temperatures. Hardness per Shore (A): 95°. Available in natural and blue. Hose material: polyurethane PUR. Working pressure: from 8 bar to 12 bar (depending on the diameter hose). Operating temperature: od -40°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, resistant to abrasion, breaking and kinking spiral hose intended for pneumatic systems control, tools hand, robots industrial, etc. terminated on both sides straight sections o length 100 mm and 500 mm and fitting with thread external BSPT. The stated total length is the maximum hose length after stretching. Hose material: blue polyurethane PUR. Working pressure: up to 14 bar (depending on the diameter hose). Operating temperature: od -40°C up to +75°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose HYPERLINE FX is optimal solution in use industrial, when required are large flow rates, resistance chemical and temperature, resistance to penetration. perfectly is suitable for conveying substances chemical, fuels, oils, paints, solvents, adhesives, dyes, gases and steam water, detergents, water and substances food. at temperature use above +160°C maximum pressure working given in table should reduced o 1% on each 1°C above tej temperatures. for example at temperature 180°C maximum pressure working for hose AF-FXSS-10 is: 100 bar – (180°C-160°C) x 1 = 100 bar – 20% = 80 bar. W case, when a hose PTFE flows substances, which is poor conductor and has potential properties electrification, charge electric will accumulated on internal surface PTFE and to avoid problem electricity static is used antistatic AS variant PTFE. antistatic teflon in version AS contains appropriate distributed in PTFE graphite and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). Hose material: inside smooth, externally Serrated PTFE (teflon) - natural white and antistatic - black. Reinforcement: braid of steel AISI 304. Working pressure: from 50 bar to 110 bar - depending on the diameter hose. Operating temperature: od -70°C up to +260°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, semi-transparent hose smooth with PTFE o excellent resistance chemical. intended for low-pressure installation, chemicals, paints, adhesives, fuels liquid and gas, oils, greases, air, gases, water, steam and liquids based on water. used we all types industry. hose not is antistatic (not dissipates charges electric for substances non-conductive). not recommended for pneumatic fittings push-in. It can be used also as mechanical guiding cables or tie rods Due to low factor friction and self-lubricating properties PTFE. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). factor safety n = 4:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Hose material: smooth PTFE (teflon). hardness Shore (D): 58. Operating temperature: od -200°C up to +260°C. Working pressure: from 2.3 bar to 10.8 bar - depending on the diameter hose.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure hose delivery, of reinforcement steel, intended for conducting steam superheated. Layer outer resistant to high temperature and conditions atmospheric. Not intended for steam cleaners ("dry steam cleaners"). Do steam water use special fittings bolted screws intended for steam water. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black EPDM rubber. Reinforcement: double cord with wire steel. Outer layer: black or red EPDM rubber, micro-perforated. Working pressure: 18 bar. Operating temperature: od -40°C up to +210°C (momentarily up to +232°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for equipment for high-pressure washing cold and hot water. resistant to abrasion, ozone and detergents. Not is suitable for cleaning steam. standards: EN 1829-2:2008, EN 853 1SN or EN 853 2SN - compliance dimensional. Inner layer: black synthetic rubber. Reinforcement: a single steel braid or a double steel braid. Outer layer: black or blue synthetic rubber. Working pressure: from 210 bar to 400 bar, depending on the diameter and type hose. Operating temperature: od -40°C up to +160°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsARMORVIN HNA to hose suction-delivery intended for conveying juices, drinks, milk, water, wine, beer, alcohols o a concentration up to 50% and other products food. not recommended for greasy substances such as oils. except for intended use food, can be used between other in industry, construction czy agriculture, for light chemicals, dirty water, sludge, sewage and other liquids not containing fats, oils and hydrocarbons. is suitable also for air, a embedded in wall hose steel spiral allows use go for vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk. at this kinds substances, should take into account abrasion resistance and any problem electricity static. smooth surface inner reduces losses flow and ensures ease cleaning. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: galvanised steel spiral. Working pressure: from 2 bar to 7 bar - depending on the diameter hose. vacuum at 20°C: from 0.7 bar to 0.85 bar - depending on the diameter hose. Operating temperature: od -5°C up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug lever coupling ANFOR with "tail" for hose for use between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel galvanized. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: od -20°C up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong A clamp screw-type with closure articulated for large loads is characterized strength design and two full pins. recommended for tight connections thick-walled, reinforced hoses industrial. A clamp made with high quality tape steel o wide od 18 mm for 26 mm. flanged edges tape prevents damage surface hose, on which works A clamp. A clamp has on band marking diameter minimum and maximum and Material, with which is made. thanks to hexagonal head screws possible is use commonly used tools, as keys flat, push-on, adjustable. Material: all element made of steel stainless AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTOPFLEX® to system securing, which protects devices against damage and workers against injury in case tearing hose with fastening fittings. torn out with fittings hose will be held using cable. clamp, equipped in rubber a gasket, ensures stable fixing, independently od changing pressure working. securing intended is for lines hydraulic and selects je for individual types ends (metric, inch, flange, etc.). additional should purchase appropriate clamp STOPFLEX® (index OP-SFO-...) for given diameter hose. System has been tested on line working under maximum pressure working hoses, specified in accordance with following standards: EN 853, EN 854, EN 855, EN 856, SAE J517. correct action guaranteed is under a condition not exceeding pressure working the given in standards.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check RFL L type U (coupling push-in on inlet and the outlet valve) regulates stream flowing air in one direction. Working pressure: 10 bar. Operating temperature: od -20°C for +60° C. medium: filtered compressed air, oiled or not oiled.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality two-way ball valve type BKH with thread internal BSP, intended for high-pressure installation hydraulic and industrial. in order to correct selection valve for media other than oil hydraulic and for high temperatures use, should consult with Tubes International. pressure working dependent od material seal valve. Material: steel (body, ball, stem). seal: PA, PVDF or PTFE (ball), NBR or FKM (stem). Operating temperature: od -40°C up to +100°C (PA); od -40°C up to +150°C (PVDF); od -200°C up to +250°C (PTFE); od -20°C up to +100°C (NBR); od -20°C up to +200°C(FKM).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure valve needle intended for mounting in installation or mounting panel. used mainly in heavy conditions, for sampling samples, cutting flow and for stations for testing. standard with stem type V (work valve close - open). each valve is factory tested. Coupling material: steel AISI 316. Material stem: steel AISI 316. sealing valve: metal/metal (steel AISI 316). sealing gland: PTFE or GRAFOIL. Operating temperature: up to +204°C (PTFE), up to +648°C (GRAFOIL). Working pressure: up to 690 bar. Connection: NPT female.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve overflow VMP limiting maximum pressure oil in systems hydraulic. allows free Flow rate liquids between connections P. W moment rise pressure over set value, occurs opening ways T and outflow excess oil for bowl. value pressure opening sets using screws (setting a wrench Allen, lock a lock nut). valve equipped in Connection pressure-gauge (1/4" BSP female) and holes assembly. Material body: steel galvanized. Material valve: steel galvanized. sealing: NBR. maximum Working pressure: 300 bar. Operating temperature: od -20°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve gate type 2029 with seal metal-metal and stem non-rising, intended for installation industrial. allows adjustment or throttling, at small speeds flow. maximum pressure working fixed in full the scope temperatures use. Body material: AISI 316 steel. Material gate: steel AISI 316. Material a knob: aluminum. sealing stem: PTFE. Connection: BSP female. Operating temperature: od -20°C up to +200°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve check type FPR intended for closing flow liquids hydraulic in one direction and opening free flow liquids in direction opposite. standard pressure opening: 0.5 bar (available also 3, 6 and 10 bar). permissible direction flow A → A1. Material: steel galvanized (body), hardened steel (stem). sealing: metal-metal. Operating temperature: od -30°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling IBC with a thread internal trapezoidal (nut swivel or fixed) compliant with the DIN EN 12713 standard and fitting for hose. The trapezoidal threads that the IBC couplings are fitted with as standard match 100% the threads in the IBC containers of various manufacturers. Material: polypropylene. gasket: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling reloading TW type VK with thread internal BSP. intended for mounting on ends for hose or installations pipe having thread external BSP. made in accordance with the standard EN ISO 14420-6 (formerly DIN 28450). intended for liquids, bulk materials and gases (with the exception liquefied gas and steam). Material: brass. pressure: od -0.8 bar up to 16 bar. Operating temperature: od -20°C up to +65°C (should take into account medium and Material seal). sealing thread (type the gasket GD): polyurethane.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection with thread external BSPT type B1 with a ring cutting intended for connecting pipes copper and hoses with plastics. W case connecting with hoses recommended is use ferrule reinforcing (B12). Material: brass nickel-plated. Working pressure: 60 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-on with thread external BSPT type C1 intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality Connection angled 90° with thread external BSPT, made entirely of steel AISI 316L, series 60110. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow swivel, screw with thread external cylindrical, series F type R 31 NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: brass nickel-plated. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in angled adjustable with thread external, type R31, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic Gun filling type 227X of steel stainless o flow capacity 40 l/min. intended for AdBlue and water. standard equipped is in Connection swivel 1" BSP female, which prevents tightening hose. has system automatic cut-off medium. is adapted for use with of all dispensers on stations fuels. Not is intended for oil drive and gasoline unleaded. Diameter outlet: 18 mm. Material: steel stainless coated rubber. color: blue. Flow rate: 40 l/min. connection swivel: tak.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLever valve gate enabling fast opening and shut-off flow. The design gate with double articulated dial ensures good sealing. used in agriculture, equipment vehicles sewage and in industry. meets requirements the directive PED 2014/68/UE. maximum pressure working fixed in full the scope temperatures use. Body material: brass. Material gate: brass. Material lever: steel carbon. sealing stem: fiber. sealing body: NBR. Connection: BSP female. Operating temperature: od -20°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPliable and flexible, easy in handling hose suction-delivery intended for conveying greasy and non-greasy substances food, demanding use rubber free of odour and taste. Contains no plasticisers, phthalates or substances of animal origin. Layer inner with NBR resistant to used standard in industry food agents and processes cleaning. Layer outer resistant to momentary contact with fats animal and vegetable. especially recommended for applications demanding small radius bends at sound strength on pressure and vacuum. Widely used in industry dairy and for handling milk in standard conditions use. not recommended for applications transfer in heavy conditions use and at pressure pulsating. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) industry food, contact with food: EC 1935/2004, EC 2023/2006 (GMP). Layer inner compliant with D.M. 21/03/73, FDA 21 CFR 177.2600, BfR, 3A Sanitary Standards, RAL (German institute ensuring quality and certification). Inner layer: white NBR rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: blue synthetic rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: od -20°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket bolted PVS quick coupling hydraulic intended for installation o very high pressures, in which available large loads mechanical. used in presses hydraulic, equipment rescue, jacks hydraulic, cutters, etc. can be joined / disconnected when in system found pressure residual. caps should order separately. Material: steel carbon. sealing: NBR. Flow rate: 1/4" - 16.4 l/min; (Δp = 4 bar), 3/8" - 21.3 l/min; (Δp=4 bar). Working pressure: 700 bar. pressure bursting: 1/4" - 2100 bar (coupling connected), 3/8" - 1850 bar (coupling connected), 1/4" - 1800 bar (socket disconnected), 3/8" - 1850 bar (socket disconnected). Operating temperature: od -25°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling NiTO of steel stainless AISI 316L with thread internal BSP. used in conditions elevated requirements in the scope hygiene and resistance to corrosion (e.g. industry food, hospitals). Not can connect directly element with various systems e.g. socket 1/2″ with a plug 3/4″. Material: steel AISI 316L. Working pressure: 25 bar. Operating temperature: od -20°C up to +150°C. Material seal: Viton.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling with thread internal BSP o free flow intended for cold and hot water. A double-sided gasket socket without valve seals both plug as and connection threaded with installations, co ensures high service life. Material: brass (balls, spring - steel stainless). Working pressure: 16 bar. sealing: EPDM (with approval KTW, DVGW W270 for water potable). Operating temperature: up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling Hansen Beverage with thread external NPT. coupling available in two versions: for gases type 2HG and for liquids type 2HL. versions te not are interchangeable of each other (different Diameter plug), co allows on avoiding mistakes in connection. Recognizing version is very easy. Dla fittings for gases ring identification on in the socket is white, a hexagon on plug has a notch. Dla fittings for liquids ring identification on in the socket is black, a hexagon on plug not has a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket lever coupling ANFOR with "tail" for hose for use between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel galvanized. sealing: rubber NR/SBR. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: od -20°C up to +50°C.



















































