0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for water cooling ESSEN®

          Air and water hoses | All products
          0 €
          Hose delivery intended for water cooling in smelters, foundries and we all use, where hose rubber works close source heat. coated fiber glass resistant to temperature up to +530°C caused radiation thermal. used in systems cooling. especially recommended for installation water at furnaces metallurgical. resistant to momentary action splashes red-hot hot metal. Roll length: 60 m or 120 m. Inner layer: black EPDM rubber. Reinforcement: cord synthetic. Outer layer: EPDM rubber coated fiber glass. Working pressure: 10 bar. Operating temperature: od -40°C up to +120°C, outer up to +530°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A general-purpose hydraulic hose o reduced diameter outer and weight and increased flexibility. meets standards: EN 857 2SC, EN45545-2. Inner layer: black synthetic rubber. Reinforcement: a double steel braid. Outer layer: black, flame-retardant synthetic rubber. Working pressure: from 90 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C. For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose o calibrated diameter outer, intended for installation pneumatic, hydraulic, oil, fuel, lubrication and chemicals. Available in colours: natural, black, blue, red, yellow. Hose material: polyamide PA 12 (nylon). Working pressure: from 19 bar to 28 bar, depending on the diameter and wall thickness wall hose. Operating temperature: od -40°C up to +80°C (for media based on water +70°C). standard: SAE J 844 (diameter od 1/8" for 5/16").
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, colorless, clear, flexible hose free of odour and taste, non-toxic, not containing phthalates DEHP. designed specially for use in pumps peristaltic. used for dispensing and portioning cold and hot products food, for soaps and detergents, for paints and in laboratories. soft Material hose (60° Shore (A)) is very flexible and ensures very good service life over 500 hours use in pump peristaltic. hose is good alternative for used often hoses, PVC or silicone. is flexible even in temperature -40°C and withstands elevated temperature up to +121°C. has good resistance chemical on range substances chemical, e.g. acids and bases. Not recommended for fats, high-percentage alcohols and hydrocarbons. resistant to ozone, oxygen and light solar, flame-retardant. is characterized low extractability (penetration components material for medium). Meets the requirements of hygienic and for contact with food: European 10/2011 EU (for conditions and substances acc. to certificate), American FDA, NSF-51. possible sterilization steam, oxide ethylene or radiation. length full roll hose 15 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: tygoprene® - thermoplastic elastomer styrene (TPE). Maximum Operating temperature: up to +121°C. temperature brittleness: -66°C. Hardness: 60° Shore (A). Density: 0.9 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Low-pressure hose suction-delivery with transparent layer inner with resistant chemical PFA and thick layer external with transparent silicone. intended for various applications in industry pharmaceutical, cosmetic, food and chemical, where besides the highest purity, asepsis and resistance chemical required is observation flow medium. Layer inner with polymer perfluoroalkoxy PFA (polymer fluorine o properties close for PTFE), transparent, mirror smooth, free of odour and taste, inert chemical, meeting high requirements hygienic (FDA, USP, European EU). Reinforcement spiral of steel stainless ensures good resistance to vacuum. thick Layer outer with silicone cross-linked compounds platinum o smooth surface features properties not adhesion (hose not „adhesives ”) and small a coefficient friction. can be easily purified at use weak detergent. The design hose combines advantages PFA with flexibility silicone and its resistance on temperature. hose has small minimal radius bends, is pliable and flexible in low and elevated temperatures, resistant to cyclic bending in accordance with ASTM D 2176 and on loads dynamic. standards and requirements hygienic: Inner layer: USP CLASS VI, 3-A Sanitary Standards 18-03 Class I, 10/2011/EU, FDA, ISO 10993-4, -10, -11, non-cytotoxic (ISO 10993 Part 5), ICH Q3D; Outer layer: USP CLASS VI, 3-A Sanitary Standards 18-03 Class I, D.M. 21/03/73, FDA, BfR, European Pharmacopoeia 3.1.9, ISO 10993-4, -10, -11, non-cytotoxic (ISO 10993 Part 5). hose compliant with 1935/2004/EC, 2023/2006/EC (GMP), made in Cleanroom ISO 14644-1 Class 8, not contains phthalates, adipates, nitrosamines, substances origin animal, substances subject EC 1907/2006 (REACH). Confirmation of resistance and application conditions requires contact with Tubes International. For confirmation of resistance and conditions of use, please contact Tubes International. assembly: should use fittings with spigot („tail” for hose) smooth, not having sharp or high barbs, which could po clamping cut or damage layer inner with PFA. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. assembly ferrules clamping or hose clamps (clamps). Inner layer: transparent polymer PFA. Reinforcement: spiral of steel stainless AISI 302. Outer layer: transparent silicone. Working pressure: from 1 bar to 3 bar, depending on the diameter hose. Operating temperature: od -30°C up to +150°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          WEICON paste assembly Anti-Seize HIGH-TECH, container 120 g

          All products | Cleaning agents, maintenance products, assembly compounds, and protective coatings
          0 €
          Paste assembly Weicon Anti-Seize High Tech ensures protection against corrosion, seizing and „cold welding”, especially on steel stainless. recommended especially for use in extreme conditions e.g.: at high temp., agents aggressive, high pressures, as well as for lubrication loaded bearings and surfaces sliding (only in engines low-speed). eliminates squeals and squeaking, has good properties sealing, allows easy assembly and disassembly components. economical in use (1 kg on ok. 40 ÷ 50 m 2 ) and free od metals toxic, consistency NLGI - Class 1. temperature use: od -40°C up to +1400°C. conducts heat. resistant to changes temperatures and loads pressure (230N/mm 2 ). Packaging - container 120 g.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug screw-together HPA quick coupling hydraulic intended for installation o very high pressures, in which available large loads mechanical. used in presses hydraulic, equipment rescue, jacks hydraulic, cutters, etc. can be joined / disconnected when in system found pressure residual. caps should order separately. Material: steel carbon. sealing: NBR. Flow rate: 1/4" - 16.4 l/min; (Δp = 4 bar), 3/8" - 21.3 l/min; (Δp=4 bar). Working pressure: 700 bar. pressure bursting: 1/4" - 2100 bar (coupling connected), 3/8" - 1850 bar (coupling connected), 1/4" - 1490 bar (plug disconnected), 3/8" - 1500 bar (plug disconnected). Operating temperature: od -25°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling DN11.8 with fitting for hose, without flange, facilitating fast connection gun for water with a hose or with other accessories for washing. Material: steel AISI 303/304L. Working pressure: 200 bar. Operating temperature: up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality plug water quick coupling NiTO 1/2" with thread internal. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. sealing: NBR (not is suitable for gasolines and oils).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A PERROT lever coupling plug with connection for welding-on with wide application, between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel carbon, galvanized. Working pressure: up to 10 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug coupling dry-break DRY-MATE with thread internal of steel stainless AISI 316. used in industry chemical, pharmaceutical, agriculture and systems transfer. Not is intended for media gas. Installed on the pressure side (tank side). The design plug based is on a valve ball, which ensures completely unobstructed Flow rate. plug supplied in set with caps with polypropylene. Coupling material: body - steel AISI 316, latch CAMLOCK - steel AISI 316. sealing: valve - PTFE. Working pressure: up to 7 bar. Operating temperature: up to 150°C. Maximum leakage: 1 ml (1") and 2 ml (1.1/2" and 2").
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Cotter pin, PVC protecting coupling SKV, red

          All products | Fittings for high-pressure hoses
          0 €
          Cotter pin protecting serves for securing against accidental loosening a nut po side plug coupling SKV. assembly between a clip protecting a a lock nut. Diameter D - Diameter po outside. Material: red PVC.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A compact, two-piece medium-pressure ball valve intended for demanding applications general. It can be used for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line. valve is characterized high range size for ensuring appropriate large flow, tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. designed for use in position completely open or completely closed. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). Body material: AISI 316 steel. Material the ball and stem: steel AISI 316. Material lever: steel AISI 304, PVC. sealing the ball: modified PTFE. sealing stem: PTFE. Operating temperature: od -42°C up to +204°C. Working pressure: up to 137 bar (depending od temperatures). Connection: inch LET-LOK®.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V3V L two-position three-way, with venting the system pneumatic, in version ended on both sides couplings push-in (line - line). version closed on a padlock, secures against opening through unauthorised persons. supplied in set with padlock and two wrenches. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Set connection GA

          Accessories for FRL | All products
          0 €
          Set connection GA, serves for connecting individual element installation preparation compressed air series G. W set found connector and 2 screws. available in shape: "L", "T" and "U". Supply pressure: up to 10 bar. Operating temperature: up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling HAMMER LUG type 200 o wide range applications (for conveying water, air, gas, oil) meeting requirements greater applications in the scope medium pressures. precision matched surface sealing parts female and male causes reliable sealing pressure. set: part male, female + A nut. color: grey (part male, female), blue (A nut). Material: steel carbon A105. Connection: NPT female. sealing: metal/metal (cone). pressure: 2000 PSI (138 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug coupling reloading TW type VK with thread internal BSP and with a lining E-CTFE. intended for mounting on ends for hose or installations pipe having thread external BSP. made in accordance with the standard EN ISO 14420-6 (formerly DIN 28450). used for most aggressive chemical media, for which resistance corrosion steel acid-resistant AISI 316 is insufficient. E-CTFE is characterized very high resistance chemical in wide the scope temperatures (in approximation od -40°C up to +130°C). is resistant to action all acids, alkalis and other aggressive substances (range pH 1 ÷ 14). has high properties mechanical, in particular hardness and resistance to abrasion. Material: steel stainless. sealing thread (type the gasket GD): teflon.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Adapter reducing with thread external BSPT and with thread internal BSP for use in connections pipe installation industrial. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Nozzle comb 8 channel, flat-jet, terminated thread external 1/4" BSP. Intended for blowing off with greater surface all contaminants: liquids, fine chips, filings etc. is characterized high force air blowing at low level noise. ideal for construction knives aircraft. works in difficult conditions, e.g. in very high temperatures. compliant of the standard OSHA 1910.95 (b), STD 1-13.1 and the directive 2003/10/EC. Material: ULTEM1000. Working pressure: up to 10 bar. Operating temperature: od -20°C up to +200°C. Flow rate: 580 l/min (at a pressure of 8 bar). level noise: 81.5 dB (at a pressure of 8 bar). force air blowing: 5.05 N.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket quick coupling CEJN 116 with thread internal and with valve intended for installation hydraulic o very high pressures. used in presses hydraulic, equipment rescue, jacks hydraulic, cutters, etc. optionally socket can be equipped in ring securing against accidental disconnection. supplied standard with a cap in order to protection against contaminants. Material: hardened steel, galvanized. sealing: NBR. Flow rate: 6 l/min (Δp = 4 bar). Diameter nominal: 2.5 mm. Working pressure: 1500 bar (coupling connected). pressure bursting: 3000 bar. Operating temperature: od -30°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality socket water quick coupling NiTO 3/4" with fitting for hose. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. sealing: NBR (not is suitable for gasolines and oils).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Socket coupling CAMLOCK B with a thread external, aluminum

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Socket coupling CAMLOCK B with a BSPT male thread or NPT made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: aluminum. Levers: steel AISI 304 (in sizes 1.1/4" for 4" - Levers made of brass). Sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Ring clamping EAR CLIP with 2 ears for mounting different kinds hoses low-pressure reinforced a braid or without reinforcement. easy and fast assembly at means intended for this order pliers. rounded edges inside ring protect hose against damage. Material: galvanised carbon steel.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Elbow with thread internal BSP type A9 intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Elbow Hamburg 90°, steel stainless, 3D

          All products | Fittings (pipes, fittings and connectors)
          0 €
          Elbow 90° for welding butt for applications pressure made with pipes. Model 3D compliant with the standard EN 10253-4 (steel stainless). appropriate make according to standards DIN 2605-1 type 3. With an EN 10204 3.1 material certificate. used commonly in industry in construction installation and pipelines, between other as element complete welded ends angled for hoses metal and rubber (welded with fitting threaded and flanged) and other fittings and element fittings. on request available also other sizes and materials, in this elbow o sizes metric and elbow according to ASME. Note: are to fittings standard type A according to EN 10253, o such same wall thickness ends for welding and body. Ich strength on pressure is smaller than for tubes straight o tej same diameter and wall thickness. pressure working elbow should determine using coefficient correction pressure the given in standards EN 10253 or DIN 2605-1 (given value are approximately and are 0.7÷0.8 pressure corresponding dimensionally tubes). Material: steel AISI 321, AISI 316Ti. Working pressure: od 56 up to 208 bar - depending on the diameter.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting for washers high-pressure, steel carbon, type ZKW110

          All products | Fittings for hoses for pressure washers
          0 €
          A fitting with thread internal for washers high-pressure. Material: steel carbon.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting socket SKV with "tail" type INTERLOCK Intended for hoses hydraulic type 4SH, R13, R15 (in sizes 3/4" ÷ 1.1/2"). Material: steel galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting hydraulic AGR for hose UHP steel carbon, type PBZ110

          All products | UHP thermoplastic hoses and fittings
          0 €
          A fitting hydraulic (type P - of special „tail” for hose thermoplastic) with thread external BSP, sealing on a 60° cone (AGR). Intended for crimping in hoses thermoplastic UHP using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Screw A fitting threaded type S2 with thread external BSPT (sealing on the thread), made in accordance with the standard EN 14424, Intended for hoses rubber and some types hoses with plastics thermoplastic, with soft reinforcement textile (without spiral with wire). used commonly in sector fuel in lines distribution fuels and gases (e.g. LPG). basic version made completely with brass; Available also in version of steel stainless (A fitting) with ferrule with brass chrome-plated. Material: brass (B). Working pressure: 16 bar (up to 25 bar for DN25). Operating temperature: od -20°C up to +65°C (od -30°C up to +70°C - for LPG).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting tubular, steel carbon, type RST

          All products | Low-pressure fittings and adapters
          0 €
          A fitting tubular straight type RST, without a nut, Intended for hoses low-pressure rubber and plastic unreinforced and of reinforcement textile, with external a braid steel. used commonly in flexible lines for fittings sanitary, installation fuel, air etc. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Connector screw-together for hoses, brass, NiTO type A

          All products | Low-pressure fittings and adapters
          0 €
          Brass connector screw-together for hoses NiTO type A with thread BSP with seal flat. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Mini actuator double-acting operation ISO 6432 STD, type 110, without magnet, without cushioning. has been designed for use with filtered air oiled or not oiled and not requires additional operations maintenance. Do make actuator used sleeve of steel stainless. reduced dimensions external covers some diameters, co allows assembly actuators in difficult and confined spaces. service life actuators with seals NBR is 15 million cycles, with polyurethane 30 million cycles. The presented value not should be treated as binding or guaranteed, a only as reference Due to variability many agents, including loads radial and axial, speed, temperature, czy losses air (value limit). Piston diameter: Ø 8, 10, 12, 16, 20 and 25 mm. stroke working: od 5 for 500 mm. Working pressure: od 0.8 up to 10 bar (Ø 8, 10, 12 mm); od 0.6 up to 10 bar (Ø 16, 20, 25 mm). sealing: polyurethane, NBR, FKM/FPM. Operating temperature: od -10°C up to +150°C depending on used seal.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A nut coupling HAMMER LUG, steel 4130, type 1502

          All products | Oil and gas industry couplings
          0 €
          A nut Intended for connections parts male and female coupling HAMMER LUG, type 1502. Material: steel chromium-molybdenum 4130.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A nut, steel stainless, type VT124

          All products | Fittings (pipes, fittings and connectors)
          0 €
          A nut with thread BSP, type VT124. Material: steel AISI 316. given dimensions are indicative and can slightly differ depending on the manufacturer.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A clamp DIN 3015 heavy, aluminum, type 201

          All products | Clamps for hydraulic pipes
          0 €
          A clamp DIN 3015 heavy type 201 (with a top plate) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: aluminum. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: up to +350°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure Water gun SG25 with lance extension for applications industrial. Suitable for warm and cold water. The lever mechanism does not require the operator to use much force, which translates into comfortable and pleasant work. part outlet terminated thread internal M22x1.5. Gun occurs in version of fixed or swivel connection for installation. Housing material: high-strength plastic. Working pressure: up to 220 bar. pressure The permissible: 250 bar. Flow rate: 30 l/min. Operating temperature: up to +160°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Water gun for industry food. made with brass and steel stainless, sealing – Viton. Gun coated blue, non-staining, resistant to impact plastic, equipped in rings protective with soft rubber. has adjustable nozzle outlet, smooth adjustment flow and lock trigger. Bow cover trigger protects against uncontrolled opening stream water and against damage. maximum Working pressure: 24 bar. Maximum Operating temperature: +60°C (momentarily +90°C). Flow rate: 68 l/min (5 bar), max. 100 l/min.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Cover for an IBC container IBC with an air vent, polypropylene

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Cover for an IBC container IBC with an air vent with a thread internal pod air vent BSP. The cover is supplied with a gasket. Material: polypropylene. Sealing: EPDM. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Pneumatic extension - ready rubber line for air made with hose MPX20. terminated brass socket and a plug quick coupling Eurostandard DN7.2 (matches for typical connections). Do use general, in particular for tools pneumatic, tam where required is hose rubber o properties antistatic. Inner layer: black EPDM rubber. Reinforcement: textile braid. Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: od -40°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Industrial hose for water and air. Widely used for washing hot water floors and equipment industrial. is suitable also for use external. resistant to conditions atmospheric, ozone and abrasion. Not is resistant to oil, not recommended also for air with mist oil. Inner layer: black EPDM rubber. Reinforcement: a polyester braid. Outer layer: red EPDM rubber. Working pressure: 10 bar. Operating temperature: od -40°C up to +100°C (momentarily up to 120°C).
        Go to Top