Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBalancer with automatic a lock designed is for relief tools hand, power tools etc. in order to improvement comfort use. through load capacity spring offset weight suspended tools, improving safety and ergonomics, a also helping prevents accidental bleeding, co protects against potential damage. load capacity spring adjustable is using flat wrench. should adjust load capacity balancer for mass suspended tools. Material housing: aluminum cast. Material cable: steel stainless. length cable: 2500 mm. thickness cable: 2.5 mm. Operating temperature: up to +70°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle comb 16 channel, flat-jet, terminated thread external 1/4" BSP. ideal for cleaning and cooling. Bez adapter. Material: blue polyamide. pressure maximum: 6 bar. Operating temperature: od -10°C up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible a steel braid, used for securing hoses against damage mechanical, abrasion and temperature. ensures also increase ich strength at elevated pressure. can be clamped a clamp crimp or ferrules. Material: steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPress P20 CS Powered is motor electric 1.6 kW o voltage 12 V or 2.2 kW o voltage 24 V, powered with battery, Intended in particular for equipment cars service and vehicles technical. Diameter crimp set knob micrometric. indicator reaching diameter crimp, signalled is electrically using indicator light LED. press occurs in two versions in which head crimping can be placed po right or left side. All FINN-POWER crimping presses are adapted to work with interchangeable jaw sets (ordered separately). On example for range diameters crimp od 10 for 61 mm should order 12 sets jaws standard od FP-20-10 for FP-20-54.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSelf-vulcanizing tape silicone PYROSIL used for sealing cover PYROJACKET and tape PYROTAPE. Not has layer adhesive, ale overlapping on each other or on PYROJACKET or PYROTAPE vulcanizes in several seconds. resistant to radiating heat, moisture and vibration. Due to very good strength dielectric, is suitable on insulator electric. at mounting Recommended is overlap 50% and clean, dry surface. Not is recommended for contact with flame and splashes molten metal. Material: silicone in color rust. Operating temperature: up to +246°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimping press UPS Intended is for crimping using lever manual, hoses o reinforcement textile ferrules sheet-metal type EC. standard equipped is in two sets (po 8 segments clamping) jaws. range use o diameter internal crimped hoses for press UPS-3: DN 3 ÷ 8 (range diameters internal ferrules EC: 8 ÷ 17 mm), DN 10 ÷ 16 (range diameters internal ferrules EC: 18 ÷ 28 mm). Do press exists possibility purchase base o index EC-100250.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBalancer without automatic lock designed is for relief tools hand, power tools etc. in order to improvement comfort use. through load capacity spring offset weight suspended tools, improving safety and ergonomics. load capacity spring adjustable is using a knob is found on body. should adjust load capacity balancer for mass suspended tools. Material housing: aluminum cast. Material cable: steel stainless. length cable: 1600 mm. thickness cable: 2 mm. Operating temperature: up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA guard SAFE SLEEVE with dense fabric Intended for protection hoses or bundles lines hydraulic and pneumatic. excellent resistance to abrasion (tested acc. to SFS-EN ISO 12947-3), resistant chemical and on radiation UV, low conductivity electrical. A guard protects people located in the vicinity bursting hose. meets standards EN ISO 3457 and EN 12999. attribute width tape specifies width cover in state flat. Material: black polypropylene (without printing). Operating temperature: od -40°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong fabric glass coated on both sides rust silicone, o basis weight 1085 g/m 2. used primarily as A guard welding, a also in applications on outside and in industry offshore, Due to resistance to moisture and light solar. Material: fabric glass coated silicone. Operating temperature: od -54°C up to +260°C (momentarily up to +1185°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal Gun for air, water a also liquids non-explosive. intended mainly for blowing out contaminants, also in hard-to-reach places. is characterized high force air blowing, with the possibility regulation rate flow. light The design, ergonomic shape gun and low force press trigger ensures large comfort use. standard Gun equipped is in socket with thread 1/4" BSP or 1/4" NPT. this model Available is in version with nozzle 90 mm bent, which not is replaceable. Material: POM (body), brass (valve) sealing: NBR. Working pressure: 16 bar. pressure bursting: 64 bar. Operating temperature: od -20°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimping press P20 HP with manual drive pump hydraulic, works everywhere tam, where not has access for stream ani compressed air, a compact The design and small weight allows on performing repairs in space failure. has mechanical indicator (pins control) reaching diameter crimp and possibility settings the head in two positions (rotation o 90⁰). Intended for workshops repair, points service, vehicles technical. All FINN-POWER crimping presses are adapted to work with interchangeable jaw sets (ordered separately). On example for range diameters crimp od 10 for 61 mm should order 12 sets jaws standard od FP-20-10 for FP-20-54.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsASTA version cover PROTECTOR completely antistatic, Intended for use under earth and in other special environment, which require conductive surface. compliant with the standard EN ISO 80079-36:2016, which is connected with the directive ATEX for equipment non-electrical in spaces hazardous explosion. Available only in rolls. Material: polyethylene (HDPE). Operating temperature: od -50°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecial version cover PYROJACKET Intended mainly for aviation (made in accordance with the standard SAE Aerospace Standard 1072E), industry railway (compliant with DIN EN 45545-2:2013-08) and marine. additional certified is in diameters 13 mm ÷ 127 mm through DNV for temperatures +800°C through 30 minutes (ISO 15540) and through MSHA (for use in mines). Available on request version VCO with flame-retardant hook-and-loop (velcro) in the scope diameters od 22 mm for 140 mm, in lengths for 30 meters. assembly hook-and-loop causes, that A guard can be easily installed without disconnecting lines, cables czy pipes. Material: fiber glass coated silicone in color rust. Operating temperature: od -54°C up to +260°C (up to +1093°C through 15 ÷ 20 minutes), (up to +1650°C through 15 ÷ 30 seconds).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight plastic Gun for compressed air, intended for removing with surface all contaminants: liquids, fine chips, filings etc. regulation flow degree press lever. made with strength polyamide glass-fiber-reinforced. ergonomic shape and not demanding use force action lever ensures comfort use. Due to low mass and plastic construction especially recommended for industry automotive, textile, electronic etc. Gun equipped is in standard nozzle o diameter hole 1.5 mm, replaceable, with thread connection external M12x1.25. instead of nozzle standard install can other nozzles – see accessories for guns EWO. depending on the connection we distinguish Gun terminated a plug EUROSTANDARD 7.2, fitting for hose o diameter 6 mm, 9 mm and 13 mm or thread internal 1/4". Material: body - blue polyamide (PA6 GK30) glass-fiber-reinforced; sealing – NBR, PU. pressure maximum: 10 bar. pressure operating: 2 ÷ 6 bar. Operating temperature: od -10°C up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimping press P20 NMS to basic stationary device for workshops, services and small plants, producing lines hydraulic o diameter internal for 1.1/2”, with intended for performing small production lines. Powered is motor electric with supply three-phase (400 V) o power 3 kW. control reaching diameter crimp takes place using optical indicator (indicator light LED), a po po jej reaching, jaws press alloy. setting diameter crimp regulated is knob micrometric with accuracy settings 0.01 mm. All FINN-POWER crimping presses are adapted to work with interchangeable jaw sets (ordered separately). On example for range diameters crimp od 10 for 61 mm should order 12 sets jaws standard od FP-20-10 for FP-20-54. The machine P20X can equip additional in base or hanger with sockets for storage jaws, in set with handle magnetic for ich quick replacement.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle extended straight type Star-Tip, reducing level noise; The installation directly for body gun. Sound level below 85 dB, in accordance with the European Machinery Directive art. 1.5.8. Compliant with the OSHA 1-13.1 standard. (European Agency safety and Health in use). length nozzle: 300 or 500 mm. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong A guard equipped in a fastener Velcro® - „hook-and-loop” along the entire section, easy for installation on bundles lines and for removal. fabric with which made is SAFE WRAP is characterized excellent strength on stretching (EN ISO 13934-1) and is in 100% waterproof (EN 24920). SAFE WRAP meets also requirements standard ISO 3457 (carried out test porosity). is characterized high resistance on abrasion. Available in other diameters internal. Material: black fabric polyamide coated with outside black polyurethane. Operating temperature: od -20°C up to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimping press P20 X to basic stationary device for workshops and small plants, producing lines hydraulic o diameter internal for 1.1/2”. press with simplified system hydraulic, intended is for performing single lines (production unit). Powered is motor electric occurring in two variants supply: 1 phase 230 V o power 1.5 kW and 3 phase 400 V o power 2.2 kW. control reaching diameter crimp takes place using optical indicator (indicator light LED), a po po jej reaching, jaws press alloy. setting diameter crimp regulated is knob micrometric with accuracy settings 0.01 mm. All FINN-POWER crimping presses are adapted to work with interchangeable jaw sets (ordered separately). On example for range diameters crimp od 10 for 61 mm should order 12 sets jaws standard od FP-20-10 for FP-20-54. The machine P20X can equip additional in base or hanger with sockets for storage jaws, in set with handle magnetic for ich quick replacement.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle with a screen air equipped in hole central and gaps side, causing generating stream air around nozzle, protecting the operator against impact check; for direct installation on tube. Sound level below 85 dB, in accordance with the European Machinery Directive art. 1.5.8. Compliant with the OSHA 1-13.1 standard. (European Agency safety and Health in use). Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal A guard reflective in the molds rolls or shorter sheets, o basis weight 678 g/m 2, designed for reflecting above 90% energy heat radiation. used in cases, when radiating heat (radiation infrared) must be stopped and reflected. resistant to abrasion, water and oil. good resistance to flame. A guard Available o wide roll 1016 mm and 1525 mm. Material: fabric aramid, foil aluminum. Operating temperature: up to +343°C (momentarily up to +538°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsResistant to rupture and twisting, A guard heat-shrink FEP for use many branches industry. long service life use measured in years, even during use with high pressures. smooth surface prevents adhesion contaminants. excellent strength temperature. widely used in industry (e.g. as A guard rollers at production paper and in printing houses). Material: fluoro-ethyl-propylene (FEP). Maximum Operating temperature: +204°C. temperature shrinkage: od +121°C up to +204°C (shrinkage in the scope 20 ÷ 25%). Hardness: 53° Shore (A). Density: 2.15 g/cm 3.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimping press P32 NMS to basic stationary device for workshops, services and small plants, with intended for performing small production lines. greater od P20 head allows crimping hoses hydraulic for diameter 2". Powered is motor electric with supply three-phase (400 V) o power 4 kW. control reaching diameter crimp takes place using optical indicator (indicator light LED), a po po jej reaching, jaws press alloy. setting diameter crimp regulated is knob micrometric with accuracy settings 0.01 mm. All FINN-POWER crimping presses are adapted to work with interchangeable jaw sets (ordered separately). On example for range diameters crimp od 10 for 87 mm should order 17 sets jaws standard od FP-32-10 for FP-32-78. The machine P32 NMS can equip additional in base or hanger with sockets for storage jaws, in set with handle magnetic for ich quick replacement.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA guard spiral Intended for securing hoses (cables) against abrasion, impacts and crushing. serves also for holding group hoses (cables) in the molds beam. improves visibility covered hoses. resistant to acids, oils, solvents and radiation UV. ABRA to two-color version cover PROTECTOR with tzw. an index wear. Z outside is black, a od the inside yellow. ABRA helps identify space, which require more detailed observation - when only black Layer wears through revealing yellow color, will to signal, that spiral can already soon require replacement on new. Available only in rolls. Material: polyethylene (HDPE). Operating temperature: od -50°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal, thick A guard with fibre glass. excellent properties insulation thermal and electrical. as A guard hoses and cables can be used independently or e.g. under cover PYROJACKET or SILICAFLEX, to significantly increase effect insulating. occurs in two thicknesses wall: 3.2 mm - TSB and 1.6 mm - TSBL. Material: fiber glass. Operating temperature: up to +538°C (momentarily up to +705°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal Gun for air, water a also liquids non-explosive. intended mainly for blowing out contaminants, also in hard-to-reach places. is characterized high force air blowing, with the possibility regulation rate flow. light The design, ergonomic shape gun and low force press trigger ensures large comfort use. standard Gun equipped is in socket with thread 1/4" BSP or 1/4" NPT. this model Available is in version with nozzle 90 mm bent, replaceable. wide range additional accessories allows on adjustment for specific requirements applications. Material: POM (body), brass (valve) sealing: NBR. Working pressure: 16 bar. pressure bursting: 64 bar. Operating temperature: od -20°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimping press P32 X to basic stationary device for workshops and small plants, with simplified system hydraulic, intended is for performing single lines (production unit). greater od P20 head allows crimping hoses hydraulic for diameter 2". Powered is motor electric occurring in two variants supply: single-phase 230 V o power 1.5 kW and three-phase 400 V o power 2.2 kW. control reaching diameter crimp takes place using optical indicator (indicator light LED), a po po jej reaching, jaws press alloy. setting diameter crimp regulated is knob micrometric with accuracy settings 0.01 mm. All FINN-POWER crimping presses are adapted to work with interchangeable jaw sets (ordered separately). On example for range diameters crimp od 10 for 87 mm should order 17 sets jaws standard od FP-32-10 for FP-32-78. The machine P32 X can equip additional in base or hanger with sockets for storage jaws, in set with handle magnetic for ich quick replacement.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible rubber nozzle for compressed air, Intended for fast removing with surface all contaminants. regulation flow through bend nozzle. perfectly works in situations, in which we have for dealing with delicate surface, exposed on damage through direct contact. depending on the connection we distinguish nozzle ending in fitting for hose o diameter 6 mm and 9 mm or a plug EUROSTANDARD 7.2. Diameter hole nozzle: 2 mm. Flow rate nominal: 200 l/min at a pressure of 6 bar. pressure maximum: 10 bar. pressure operating: 1 ÷ 6 bar. Operating temperature: od -10°C up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal A guard in the molds rolls or shorter sheets designed for protection hoses, cables other element against splashes metals, intense radiating heat, flames and splashes welding. high content Clean silica (over 96%) ensures excellent resistance temperature, flexibility and minimal shrinkage. Not emits fumes ani vapours. occurs in three versions, in rolls o wide 915 mm and 1525 mm: SILICAFLEX BLANKET 18 – o wall thickness 0.76 mm, SILICAFLEX BLANKET 32 – o wall thickness 1.25 mm, SILICAFLEX BLANKET 36 – o wall thickness 1.27 mm. Available is also special version SILICAFLEX BLANKET coated aluminum coating reflective (FQSFB36-36AL). aluminum SILICAFLEX BLANKET except for features standard cover SILICAFLEX and reflecting intensely radiating heat, has also better strength on tearing and on abrasion, a also better resistance to water and oils. Material: fiber with silica (dioxide silicon). Operating temperature: up to +982°C (momentarily up to +1650°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimping press TUBOMATIC H25 with manual drive, intended for crimping low-pressure hoses with type EC sheet-metal ferrules. easy and light for carrying device, equipped in three sets (po 6 segments clamping) jaws: 10 ÷ 13 mm, 13 ÷ 16 mm, 16 ÷ 25 mm. range diameters crimps: 10 ÷ 25 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThin-walled hose cover reinforced vulcanized a braid synthetic. Material layer outer: black rubber SBR. Operating temperature: od -30°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle rubber for guns CEJN for use on delicate surfaces; direct The installation on tube. available diameter: Ø 14 mm, Ø 25 mm and Ø 34 mm. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA guard GT35 made with very dense fabric polyester. Intended for protection single hoses or bundles lines hydraulic and pneumatic. has good resistance mechanical and on oils and products organic. protects hose and secures the operator against spray oil in case rupture hose. Material: polyester. Operating temperature: +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimping press TUBOMATIC H25 PI with pneumatic drive, intended for crimping low-pressure hoses with type EC sheet-metal ferrules. easy and light for carrying device, equipped in three sets (po 6 segments clamping) jaws: 10 ÷ 13 mm, 13 ÷ 16 mm, 16 ÷ 25 mm. range diameters crimps: 10 ÷ 25 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal tape coated single-acting adhesive binding at jej tensioning. designed for protection hoses, cables and pipes against intense radiating heat and flames. wall thickness tape to ok. 0.76 mm. at mounting recommended is overlap 50%. Material: fiber with silica (dioxide silicon). Operating temperature: up to +982°C (momentarily up to +1650°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle comb 8 channel, flat-jet, terminated thread external 1/4" BSP. Intended for blowing off with greater surface all contaminants: liquids, fine chips, filings etc. is characterized high force air blowing at low level noise. ideal for construction knives aircraft. works in difficult conditions, e.g. in very high temperatures. compliant of the standard OSHA 1910.95 (b), STD 1-13.1 and the directive 2003/10/EC. Material: ULTEM1000. Working pressure: up to 10 bar. Operating temperature: od -20°C up to +200°C. Flow rate: 580 l/min (at a pressure of 8 bar). level noise: 81.5 dB (at a pressure of 8 bar). force air blowing: 5.05 N.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimper hand UPJ intended for crimping textile-reinforced hoses with type EC sheet-metal ferrules. standard equipped is in two sets (po 6 segments clamping) jaws o diameter internal crimped hoses: DN 4 ÷ 8 (range diameters internal ferrules EC: 10 ÷ 17 mm), DN 8 ÷ 10 (range diameters internal ferrules EC: 16 ÷ 22 mm). Do press exists possibility purchase base o index EC-100271.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA guard SAFE SLEEVE MSHA with dense fabric Intended for protection hoses or bundles lines hydraulic and pneumatic. excellent resistance to abrasion (tested acc. to SFS-EN ISO 12947-3), resistant chemical and on radiation UV, low conductivity electrical. A guard protects people located in the vicinity bursting hose. meets standards EN ISO 3457 and EN 12999. product flame-retardant, approved for use in mines. attribute width tape specifies width cover in state flat. Material: black polyester (with printing). Operating temperature: od -40°C up to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket metal-rubber DOWTY, inch, for connections high-pressure. Material: washer - steel carbon, sealing - NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle with reducer pressure; for direct installation on tube; reduces maximum pressure below 2 bar. Compliant with the OSHA 1-13.1 standard. (European Agency safety and Health in use). Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible A guard made with tape cut with tubes PE. Intended is for protection cables electric and hoses and connecting ich in beam. resistant to acids, oils, solvents and radiation UV. Material: black polyethylene (PE). Operating temperature: od -30°C up to +80°C.
