0

Our products

    Filters
      Product categories
      Material
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A rail for clamp DIN 3015 standard and double

          All products | Clamps for hydraulic pipes
          0 €
          A rail Intended for mounting clamp DIN 3015 standard type 100/101 and clamp DIN 3015 double type 301 using a nut ADES or ADESD. shipping in sections 2 m. Material: steel carbon or steel AISI 304.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A clamp DIN 3015 standard, polypropylene, type 101

          All products | Clamps for hydraulic pipes
          0 €
          A DIN 3015 standard clamp, type 101 (with a top plate) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. Available is also A clamp with smooth surface hole, Intended for hoses and cables, marked with the letter H on the end index. Dla group dimension 0 occurs one bolt with a hexagonal head, for group dimension 1 ÷ 6 available two screws with a hexagonal head. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: green polypropylene. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: od -30°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A clamp DIN 3015 standard, polyamide, type 101

          All products | Clamps for hydraulic pipes
          0 €
          A DIN 3015 standard clamp, type 101 (with a top plate) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. Available is also A clamp with smooth surface hole, Intended for hoses and cables, marked with the letter H on the end index. Dla group dimension 0 occurs one bolt with a hexagonal head, for group dimension 1 ÷ 6 available two screws with a hexagonal head. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: self-extinguishing polyamide. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: od -40°C up to +180°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A clamp DIN 3015 heavy, polypropylene, type 201

          All products | Clamps for hydraulic pipes
          0 €
          A clamp DIN 3015 heavy type 201 (with a top plate) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: green polypropylene. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: od -30°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A rail for clamp DIN 3015 heavy

          All products | Clamps for hydraulic pipes
          0 €
          A rail Intended for mounting clamp DIN 3015 heavy type 201 using a nut ADESP. shipping in sections 2 m. Material: steel carbon or steel AISI 304.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A clamp DIN 3015 double, polypropylene, type 301

          All products | Clamps for hydraulic pipes
          0 €
          A DIN 3015 double clamp, type 301 (with a top plate) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. Available is also A clamp with smooth surface hole, Intended for hoses and cables, marked with the letter H on the end index. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: green polypropylene. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: od -30°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A nut for a rail ABINS

          All products | Clamps for hydraulic pipes
          0 €
          A nut with thread metric Intended for mounting clamp DIN 3015 standard type 100/101 and clamp DIN 3015 double type 201 on a rail ABINS. Material: alloy zinc with aluminum.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Insert DIN 3015 double, polyamide, type 301

          All products | Clamps for hydraulic pipes
          0 €
          Two-piece insert clamp DIN 3015 type 301 made in accordance with the standard DIN 3015. standard has profiled (grooved) surface hole for a pipe. Material the insert: self-extinguishing polyamide. Operating temperature: od -40°C up to +180°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Insert DIN 3015 heavy, polyamide, type 201

          All products | Clamps for hydraulic pipes
          0 €
          Two-piece insert clamp DIN 3015 type 201 made in accordance with the standard DIN 3015. standard has profiled (grooved) surface hole for a pipe. Material the insert: self-extinguishing polyamide. Operating temperature: od -40°C up to +180°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Insert DIN 3015 standard, polyamide, type 101

          All products | Clamps for hydraulic pipes
          0 €
          Two-piece insert clamp DIN 3015 type 101 made in accordance with the standard DIN 3015. Dla group dimension 0 occurs one hole under bolt, for group dimension 1 ÷ 6 available two holes under screws. standard has profiled (grooved) surface hole for a pipe. Material the insert: self-extinguishing polyamide. Operating temperature: od -40°C up to +180°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plate bottom long for clamp DIN 3015 standard

          All products | Clamps for hydraulic pipes
          0 €
          Plate bottom long for screwing for mounting clamp DIN 3015 standard type 100/101. Dla group dimension 0 occurs one hole under bolt. Dla group dimension 1 ÷ 6 available two holes under bolt. Material: steel carbon, galvanized or steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plate bottom short for clamp DIN 3015 heavy

          All products | Clamps for hydraulic pipes
          0 €
          Plate bottom short for welding for mounting clamp DIN 3015 heavy complete type 201. Material: steel carbon or steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bolt stacking for clamp DIN 3015 standard

          All products | Clamps for hydraulic pipes
          0 €
          Bolt stacking for clamp DIN 3015 standard type 100/101 with thread external and internal metric, Intended for mounting clamps one on the other. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A clamp DIN 3015 heavy, aluminum, type 201

          All products | Clamps for hydraulic pipes
          0 €
          A clamp DIN 3015 heavy type 201 (with a top plate) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: aluminum. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: up to +350°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Insert DIN 3015 standard, polypropylene, type 101

          All products | Clamps for hydraulic pipes
          0 €
          Two-piece insert clamp DIN 3015 type 101 made in accordance with the standard DIN 3015. Dla group dimension 0 occurs one hole under bolt, for group dimension 1 ÷ 6 available two holes under screws. standard has profiled (grooved) surface hole for a pipe. Material the insert: green polypropylene. Operating temperature: od -30°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A clamp DIN 3015 double, polyamide, type 301

          All products | Clamps for hydraulic pipes
          0 €
          A DIN 3015 double clamp, type 301 (with a top plate) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. Available is also A clamp with smooth surface hole, Intended for hoses and cables, marked with the letter H on the end index. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: self-extinguishing polyamide. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: od -40°C up to +180°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A clamp DIN 3015 standard, polyamide, type 100

          All products | Clamps for hydraulic pipes
          0 €
          A clamp DIN 3015 standard type 100 (without plate upper) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. Dla group dimension 0 occurs one bolt with an Allen head, for group dimension 1 ÷ 6 available two screws with an Allen head. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: self-extinguishing polyamide. Material bolts: steel galvanized. Material base: steel carbon. Operating temperature: od -40°C up to +180°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plate bottom short for clamp DIN 3015 double

          All products | Clamps for hydraulic pipes
          0 €
          Plate bottom short for welding for mounting clamp DIN 3015 double complete type 301. Material: steel carbon or steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plate bottom short for clamp DIN 3015 standard

          All products | Clamps for hydraulic pipes
          0 €
          Plate bottom short for welding for mounting clamp DIN 3015 standard complete type 100/101. Dla group dimension 0 occurs one hole under bolt. Dla group dimension 1 ÷ 6 available two holes under bolt. Material: steel carbon or steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A clamp DIN 3015 standard, aluminum, type 101

          All products | Clamps for hydraulic pipes
          0 €
          A DIN 3015 standard clamp, type 101 (with a top plate) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. Available is also A clamp with smooth surface hole, Intended for hoses and cables, marked with the letter H on the end index. Dla group dimension 0 occurs one bolt with a hexagonal head, for group dimension 1 ÷ 6 available two screws with a hexagonal head. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: aluminum. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: up to +350°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A nut for a rail ABINS, steel AISI 304

          All products | Clamps for hydraulic pipes
          0 €
          A nut with thread metric Intended for mounting clamp DIN 3015 standard type 100/101 and clamp DIN 3015 double type 201 on a rail ABINS. Material: steel AISI 304.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A clamp DIN 3015 heavy, polyamide, type 201

          All products | Clamps for hydraulic pipes
          0 €
          A clamp DIN 3015 heavy type 201 (with a top plate) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: self-extinguishing polyamide. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: od -40°C up to +180°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A clamp DIN 3015 standard, aluminum, type 100

          All products | Clamps for hydraulic pipes
          0 €
          A clamp DIN 3015 standard type 100 (without plate upper) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. Dla group dimension 0 occurs one bolt with an Allen head, for group dimension 1 ÷ 6 available two screws with an Allen head. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: aluminum. Material bolts: steel galvanized. Material base: steel carbon. Operating temperature: up to +350°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plate top for clamp DIN 3015 heavy

          All products | Clamps for hydraulic pipes
          0 €
          Plate top for mounting clamp DIN 3015 heavy complete type 201. Material: steel carbon, galvanized or steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A nut for a rail ABINP

          All products | Clamps for hydraulic pipes
          0 €
          A nut with thread metric Intended for mounting clamp DIN 3015 heavy type 201 on a rail ABINP. Material: alloy zinc with aluminum or steel AISI 304.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A clamp DIN 3015 standard, polypropylene, type 100

          All products | Clamps for hydraulic pipes
          0 €
          A clamp DIN 3015 standard type 100 (without plate upper) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. Dla group dimension 0 occurs one bolt with an Allen head, for group dimension 1 ÷ 6 available two screws with an Allen head. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: green polypropylene. Material bolts: steel galvanized. Material base: steel carbon. Operating temperature: od -30°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Insert DIN 3015 heavy, polypropylene, type 201

          All products | Clamps for hydraulic pipes
          0 €
          Two-piece insert clamp DIN 3015 type 201 made in accordance with the standard DIN 3015. standard has profiled (grooved) surface hole for a pipe. Material the insert: green polypropylene. Operating temperature: od -30°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A clamp DIN 3015 double, rubber, type 301

          All products | Clamps for hydraulic pipes
          0 €
          A DIN 3015 double clamp, type 301 (with a top plate) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: self-extinguishing polyamide. Material clamp: rubber. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: od -40° up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Insert DIN 3015 double, polypropylene, type 301

          All products | Clamps for hydraulic pipes
          0 €
          Two-piece insert clamp DIN 3015 type 301 made in accordance with the standard DIN 3015. standard has profiled (grooved) surface hole for a pipe. Material the insert: green polypropylene. Operating temperature: od -30°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plate top for clamp DIN 3015 standard

          All products | Clamps for hydraulic pipes
          0 €
          Plate top for mounting clamp DIN 3015 standard complete type 101. Dla group dimension 0 occurs one hole under bolt. Dla group dimension 1 ÷ 6 available two holes under bolt. Material: steel carbon, galvanized or steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Insert DIN 3015 standard, rubber, type 101

          All products | Clamps for hydraulic pipes
          0 €
          Two-piece insert clamp DIN 3015 type 101 made in accordance with the standard DIN 3015. standard has profiled (grooved) surface hole for a pipe. Material the insert: rubber. Operating temperature: od -40°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Insert DIN 3015 standard, aluminum, type 101

          All products | Clamps for hydraulic pipes
          0 €
          Two-piece insert clamp DIN 3015 type 101 made in accordance with the standard DIN 3015. standard has profiled (grooved) surface hole for a pipe. Material the insert: aluminum. Operating temperature: up to +350°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plate bottom multiple for clamp DIN 3015 standard

          All products | Clamps for hydraulic pipes
          0 €
          Plate bottom multiple for welding for mounting clamps DIN 3015 standard type 100/101. Dla group dimension 0 ÷ 3 number clamps: 10. Dla group dimension 4 ÷ 5 number clamps: 5. Dla group dimension 0 occurs one hole under bolt. Dla group dimension 1 ÷ 6 available two holes under bolt. Material: steel carbon or steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A clamp DIN 3015 standard, rubber, type 100

          All products | Clamps for hydraulic pipes
          0 €
          A clamp DIN 3015 standard type 100 (without plate upper) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. Dla group dimension 0 occurs one bolt with an Allen head, for group dimension 1 ÷ 6 available two screws with an Allen head. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: rubber. Material bolts: steel galvanized. Material base: steel carbon. Operating temperature: od -40°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bolt hexagonal for clamp DIN 3015 standard

          All products | Clamps for hydraulic pipes
          0 €
          Bolt with a hexagonal head for clamp DIN 3015 standard complete type 101 with thread external metric. Material: steel carbon, galvanized or steel AISI 304.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bolt hexagonal for clamp DIN 3015 heavy

          All products | Clamps for hydraulic pipes
          0 €
          Bolt with a hexagonal head for clamp DIN 3015 heavy complete type 201 with thread external metric. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plate top for clamp DIN 3015 double

          All products | Clamps for hydraulic pipes
          0 €
          Plate top for mounting clamp DIN 3015 double complete type 301. Material: steel carbon, galvanized or steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bolt Allen for clamp DIN 3015 standard, steel AISI 304

          All products | Clamps for hydraulic pipes
          0 €
          Bolt with an Allen head for clamp DIN 3015 standard complete type 100 with thread external metric. Material: steel AISI 304.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bolt stacking for clamp DIN 3015 double

          All products | Clamps for hydraulic pipes
          0 €
          Bolt stacking for clamp DIN 3015 double type 301 with thread external and internal metric, Intended for mounting clamps one on the other. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Insert DIN 3015 heavy, aluminum, type 201

          All products | Clamps for hydraulic pipes
          0 €
          Two-piece insert clamp DIN 3015 type 201 made in accordance with the standard DIN 3015. standard has profiled (grooved) surface hole for a pipe. Material the insert: aluminum. Operating temperature: up to +350°C.
        Go to Top