0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket 90° DN 9 quick coupling with fitting for hose, with valve or without valve. used widely in industry for cooling moulds injection and casting parts with plastics, aluminum, brass and alloys zinc. can be used for water in cleaning machines, for hot oil, steam water. Diameter bore: 9 mm. Working pressure: 15 bar. Operating temperature: od -20°C up to +200°C (Viton). Material: brass (body socket, Connection, sleeve valve), steel stainless (spring, ring, balls).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          GROMELLE quick-coupling socket with a female BSP thread, NPT and a shut-off valve, series W-6000. quick coupling bolted intended for applications, in which occur large loads mechanical. allowed is twisting quick coupling under pressure residual up to 30 bar. W case pressure pulsating at coupling disconnected, maximum pressure working should reduced o 50%. made in accordance with the directive PED 2014/68/UE. Material: steel galvanized. sealing: NBR (Operating temperature: od -20°C up to +100°C), Viton (Operating temperature: od -20°C up to +200°C). Working pressure: up to 1100 bar (depending on size quick coupling). Flow rate has been stated for a drop pressure 3 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Ferrule M9X for hoses hydraulic rubber type 4SP, R12 or 4SH. assembly - skiving external. Diameter D1 - Diameter outer. Diameter D3 - Diameter lock. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure adapter JIS type A401 with threads external BSP (sealing inverted 60° cone) - TOYOTA. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          An adapter for a ball end and a wing nut. W made of steel stainless, has special an insert polymer or copper on surface tapered cooperating with ball surface sealing fittings. It is tightened to the ball end by means of a wing nut. creates to tight, resistant to action steam and high temperatures connection, which is at the same time easy for unscrewing and screwing without use tools. thread a nut wing has different (greater) size than thread internal adapter GFB. Adapter GFB constitutes typical part complete fittings for steam with thread internal. use adapter allows creating various connections, depending on element used in installation. Material: steel stainless AISI 316. Working pressure: 18 bar (+210°C) - steam saturated. Operating temperature: up to +230°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket quick coupling DYROS series 6 with thread internal and a shut-off valve. Available with thread metric or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting hydraulic ORFS, type ZOW110, steel carbon

          All products | Fittings for high-pressure hoses
          0 €
          A fitting hydraulic standard (type Z – of standard „tail” hydraulic for hose), with a female UNF thread with a nut, sealing flat (ORFS). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          GROMELLE quick-coupling plug with a female BSP thread, NPT and a shut-off valve, series W-6000. quick coupling bolted intended for applications, in which occur large loads mechanical. allowed is twisting quick coupling under pressure residual up to 30 bar. W case pressure pulsating at coupling disconnected, maximum pressure working should reduced o 50%. made in accordance with the directive PED 2014/68/UE. Material: steel galvanized. sealing: NBR (Operating temperature: od -20°C up to +100°C), Viton (Operating temperature: od -20°C up to +200°C). Working pressure: up to 1100 bar (depending on size quick coupling). Flow rate has been stated for a drop pressure 3 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          An adapter for a ball end and a wing nut. has tapered surface, cooperating with ball surface sealing fittings. It is tightened to the ball end by means of a wing nut. creates to tight, resistant to action steam and high temperatures connection, which is at the same time easy for unscrewing and screwing without use tools. thread a nut wing has different (greater) size than thread internal adapter GFB. Adapter GFB constitutes typical part complete fittings for steam with thread internal. use adapter allows creating various connections, depending on element used in installation. Material: brass. Working pressure: 18 bar (+210°C) - steam saturated. Operating temperature: up to +230°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure adapter type A105 with threads internal BSP, with a nut swivel (sealing 60° cone). Material: steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket 90° DN 6 quick coupling with "tail" for hose PUSH-ON, with valve or without valve, used widely in industry for cooling moulds injection and casting parts with plastics, aluminum, brass and alloys zinc. can be used for water in cleaning machines, for hot oil, steam water. Diameter bore: 6 mm. Working pressure: 25 bar. Operating temperature: od -20°C up to +200°C (Viton). Material: brass (body socket, Connection, sleeve valve), steel stainless (spring, ring, balls).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          GROMELLE quick-coupling socket series H-5000 with thread internal BSP and metric. designed and made in accordance with the directive PED 2014/68/UE. intended for applications, in which occurs large pressure working, pulses pressure, loads mechanical, frequent connection and disconnection. Application: hydraulics power (oil hydraulic), industrial (water, steam, fuels and oils, gases, chemicals). W case pressure pulsating at coupling disconnected, maximum pressure working should reduced o 50%. Material: steel galvanized. sealing socket: NBR (temperature use od -20°C up to +100°C), above size 1" Viton (od -20°C up to +200°C). Working pressure: up to 1000 bar (depending on size quick coupling), Safety factor 3:1. Flow rate has been stated for a drop pressure 3 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure 90° adapter type A305 with threads external NPT (sealing on the thread). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fittings with thread internal NPT for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps for steam type BOSS SBC. complete A fitting consists with three parts – fittings ball GB with spigot („tail”) for hose, a nut wing B of special thread internal (NPS) and special adapter GFB with thread external (NPS) such as in nut and thread internal compliant with size fittings. Adapter GFB has tapered an insert polymer or copper, cooperating with fitting ball. creates to tight, resistant to action steam and high temperatures connection, which is at the same time easy for unscrewing and screwing without use special tools, using a nut wing. Material: brass. Working pressure: 18 bar (+210°C) - steam saturated. Operating temperature: up to +230°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting hydraulic DKJ, type ZJW110, steel carbon

          All products | Fittings for high-pressure hoses
          0 €
          A fitting hydraulic standard (type Z - of standard „tail” hydraulic for hose), with a female UNF thread with a nut, sealing on a 74° cone (DKJ). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plug double for moulds injection, DYROS series 6

          All products | Quick couplings for injection molds
          0 €
          Plug double quick coupling DYROS series 6. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Quick-coupling socket cap ISO-A red, PVC, type IA

          All products | Hydraulic quick couplings
          0 €
          Quick-coupling socket cap ISO-A protecting coupling against contamination, which can result damage element and getting contaminants for the system. Material: PVC. color: red.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Adapter, Elbow 90° high-pressure type A206, with thread external BSP (sealing 60° cone) and with thread external NPT (sealing on the thread). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          An adapter for a ball end and a wing nut. W made of steel zinc-plated, has special an insert polymer or copper on surface tapered cooperating with ball surface sealing fittings. It is tightened to the ball end by means of a wing nut. creates to tight, resistant to action steam and high temperatures connection, which is at the same time easy for unscrewing and screwing without use tools. Adapter GDB on both sides screwed with a nut wing can connect two hoses with fitting GF. Material: steel galvanized. Working pressure: 18 bar (+210°C) - steam saturated. Operating temperature: up to +230°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting hydraulic DKR 90°, type ZBW210, steel carbon, Y

          All products | Fittings for high-pressure hoses
          0 €
          A fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, cone sealing 60° (DKR), angled 90°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          ISO-A hydraulic quick-coupling plug with a shut-off valve and thread external metric. Application: hydraulics power (oil hydraulic). quick coupling used mainly in machines agricultural. Commonly called "euro couplings". interchangeable with quick coupling ISO-A other manufacturers. Material: steel galvanized. sealing plug: NBR. Operating temperature: od -25°C up to +100°C. Working pressure: up to 250 bar. Safety factor 4:1. Flow rate has been stated at Δp = 3 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure adapter JIS type A503 with thread external metric (sealing inverted 60° cone) - KOMATSU and with thread external BSPT (sealing on the thread). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket DN 9 quick coupling with thread external BSP and metric (sealing on a 60° cone), with valve or without valve. used widely in industry for cooling moulds injection and casting parts with plastics, aluminum, brass and alloys zinc. can be used for water in cleaning machines, for hot oil, steam water. Diameter bore: 9 mm. Working pressure: 25 bar. Operating temperature: od -20°C up to +200°C (Viton). Material: brass (body socket, Connection, sleeve valve), steel stainless (spring, ring, balls).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting hydraulic DKR-F, type ZBW140, steel AISI 316L

          All products | Fittings for high-pressure hoses
          0 €
          A fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, sealing flat - requires use additional the gasket flat (DKR-F). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting FSS with a flange swivel, for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps shell for steam (EN 14423, DIN 2826, sizes 1/2” for 2”). Flange according to European standards (EN 10092-1) PN40 and PN16 and according to American ASA (ASME) standards 150 PSI and 300 PSI. Material: steel stainless AISI 316, steel galvanized. Working pressure: 18 bar (+210°C) for steam saturated and in accordance with pressure working given class flange in tej temperature; for other applications in accordance with pressure working for given class flange (e.g. PN40) - selection in contact with Tubes International.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling TEMA STANDARD (NORDIC RANGE) with a shut-off valve and with thread internal BSP, NPT. intended for heavy conditions use. Dla pressure pulsating maximum pressure working should reduced o 50%. Application: hydraulics power (oil hydraulic), industrial (water, steam, fuels and oils, gases and chemicals). Material: steel stainless AISI 316. Working pressure: up to 300 bar (depending on the diameter). Safety factor 4:1. sealing: Viton, NBR. Operating temperature: od -20°C up to +200°C - Viton, od -30°C up to +100°C - NBR. Flow rate has been stated for a drop pressure 3 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure adapter type A603 with thread external BSP (sealing 60° cone) and thread internal metric (sealing on the thread). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket 90° DN 6 quick coupling with "tail" for hose, with valve or without valve, used widely in industry for cooling moulds injection and casting parts with plastics, aluminum, brass and alloys zinc. can be used for water in cleaning machines, for hot oil, steam water. Diameter bore: 6 mm. Working pressure: 25 bar. Operating temperature: od -20°C up to +200°C (Viton). Material: brass (body socket, Connection, sleeve valve), steel stainless (spring, ring, balls).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting FSS with a flange fixed, for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps shell for steam (EN 14423, DIN 2826, sizes 1/2” for 2”). Flange according to European standards (EN 10092-1) PN40 and PN16 and according to American ASA (ASME) standards 150 PSI and 300 PSI. Material: steel stainless AISI 316. Working pressure: 18 bar (+210°C) for steam saturated and in accordance with pressure working given class flange in tej temperature; for other applications in accordance with pressure working for given class flange (e.g. PN40) - selection in contact with Tubes International.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling screw-together type TC intended for use in installations hydraulic cars trucks-tippers. sleeve plug is equipped in brackets butterfly and allows connection and disconnection quick coupling in very fast and straight way without needs use tools. allowed is twisting quick coupling under pressure residual max. 50 bar (pressure static, which remained in system po switching off the actuator). Application: hydraulics power (oil hydraulic). Material: steel galvanized. sealing: NBR. Operating temperature: od -40°C up to +106°C. Working pressure: up to 350 bar (depending on size). Safety factor 3:1. Flow rate has been stated for a drop pressure 3 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Ferrule MC-BP7 for hoses thermoplastic type R7 and hoses hydraulic type 1SC. assembly - without skiving. Diameter D1 - Diameter outer. Diameter D2 - Diameter inner. Diameter D3 - Diameter lock. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure adapter type A601 with thread external BSP (sealing 60° cone) and thread external metric (sealing 60° cone). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting FSS with a flange swivel, for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps shell for steam (EN 14423, DIN 2826, sizes 1/2” for 2”). Flange according to European standards (EN 10092-1) PN40 and PN16 and according to American ASA (ASME) standards 150 PSI and 300 PSI. Material: steel galvanized. Working pressure: 18 bar (+210°C) for steam saturated and in accordance with pressure working given class flange in tej temperature; for other applications in accordance with pressure working for given class flange (e.g. PN40) - selection in contact with Tubes International.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Connector standard type Z, steel carbon

          All products | Fittings for high-pressure hoses
          0 €
          Connector standard type Z intended for connecting hoses hydraulic rubber. Do crimping using ferrule. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug DN 13 quick coupling with thread external BSP and metric, with valve or without valve, used widely in industry for cooling moulds injection and casting parts with plastics, aluminum, brass and alloys zinc. can be used for water in cleaning machines, for hot oil, steam water. Diameter bore: 13 mm. Working pressure: 25 bar. Operating temperature: od -20°C up to +200°C (Viton). Material: brass (body plug, valve), steel stainless (spring).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          ISO-A hydraulic quick-coupling plug with a shut-off valve and thread internal BSP. Application: hydraulics power (oil hydraulic). quick coupling used mainly in machines agricultural. Commonly called "euro couplings". used interchangeable with quick coupling ISO-A other manufacturers. Material: steel galvanized. sealing plug: NBR. Operating temperature: od -20°C up to +100°C. Working pressure: up to 350 bar (depending on size quick coupling). Safety factor 4:1. Flow rate has been stated for a drop pressure 3 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure 90° adapter type A307 with thread external NPT (sealing on the thread) and with thread internal NPT (sealing on the thread). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket DN 9 quick coupling with thread internal BSP and NPT, with valve or without valve, used widely in industry for cooling moulds injection and casting parts with plastics, aluminum, brass and alloys zinc. can be used for water in cleaning machines, for hot oil, steam water. Diameter bore: 9 mm. Working pressure: 15 bar. Operating temperature: od -20°C up to +200°C (Viton). Material: brass (body socket, Connection, sleeve valve), steel stainless (spring, ring, balls).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fittings with thread internal BSP and NPT for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps for steam type BOSS SBC. complete A fitting consists with three parts – fittings ball GB with spigot („tail”) for hose, a nut wing B of special thread internal (NPS) and special adapter GFB with thread external (NPS) such as in nut and thread internal compliant with size fittings. Adapter GFB has tapered an insert polymer or copper, cooperating with fitting ball. creates to tight, resistant to action steam and high temperatures connection, which is at the same time easy for unscrewing and screwing without use special tools, using a nut wing. Due to reduced structurally lock (flange) fittings 2”, not should Use clamps for steam type BOSS SBC 2” with 4 claws. Material: steel stainless AISI 316. Working pressure: 18 bar (+210°C) - steam saturated. Operating temperature: up to +230°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, O-ring sealing on a 24° cone (DKOL), angled 45°, series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
        Go to Top