0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Block connection (Adapter), steel, type PFXPL

          All products | Valves and plate adapters
          0 €
          Block connection (Adapter) intended for connecting lines hydraulic with valves (manifolds) plate. equipped in the connection plate NG6 and the connection threaded: for pump (P) - 1/2" BSP female, for bowl (T) - 1/2" BSP female, for receiver (A and B) - 3/8" BSP female and pressure-gauge (G) - 1/4" BSP female. Material: steel. maximum Working pressure: 315 bar. Flow rate: 40 l/min. Operating temperature: od -20°C up to +80°C (medium), od -20°C up to +50°C (ambient).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Nozzle extended bent o diameter hole 3 mm for guns for air, terminated thread metric M12x1.25. Diameter tubes: 5 mm. available length: 110 mm, 160 mm and 260 mm. Material: brass nickel-plated. maximum pressure: 10 bar. Operating temperature: od -10°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Filter with reducer (filter-regulator) series SYNTESI®, with end connections 1/8", 1/4", 3/8", 1/2", 3/4", 1", is a device consisting of a filter and a reducing valve. built is with these same components co Filter and reducer, so has such same features technical. It reduces and purifies the air supplied by the compressor. Size: SY1, SY2. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: od -10°C up to +50°C. Connection: 1/8" BSP female ÷ 3/8" for SY1 and 3/8" BSP female ÷ 1" for SY2. Additional connection for a pressure gauge or fittings: 1/8" BSP female for SY1 and 1/4" for SY2. Condensate drain: manual / semi-automatic (RMSA), automatic (RA). Flow rate: 1300 l/min - 1/8", 2000 l/min - 1/4", 3000 l/min - 3/8" (SY1), 5800 l/min - 3/8" (SY2), 7200 l/min - 1/2", 7400 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket water quick coupling NiTO CLICK 3/4" with fitting for hose. quick coupling NiTO CLICK to water quick coupling made according to profile very popular plastic quick couplings garden and compatible with them. sealing using an O-ring placed externally on plug. Manufactured in Denmark – 5-year warranty. They retain the simplicity of the commonly known plastic quick couplings and are characterized by strength and durability. intended for water, water of agents cleaning for use in industry, services, horticulture, agriculture etc. Material: brass chrome-plated (matte - satin). Working pressure: up to 25 bar. Operating temperature: od -30°C up to +80°C. sealing: NBR (not is suitable for gasolines and oils).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A 90° PUSH-ON end with thread internal BSP, type YBW210, intended for a special self-clamping hose designed for this type of end. Mounted onto the hose without the use of clamps or brackets. It has a special barb profile adapted to the material and dimensions of the PUSH-ON hose and the construction of its braid, causing the hose to clamp onto the barbs of the end. The end must not be used with other hoses or clamped with clamps or brackets, as this risks damaging the hose. Operating temperature: od -40°C up to +80°C. Working pressure in accordance with the specification of the PUSH-ON hose. Material: galvanised carbon steel, AISI 316 steel.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A clamp RUBBER P-CLIP compliant with the standard DIN 3016 recommended for safe and damping vibrations mounting pipes, hoses, bundles cables, corrugated pipes electrical-installation (cover on cables) etc., for which exists possibility abrasion and damage. A clamp this type found wide use, m.in.: machine agricultural and construction, design engines combustion, industry railway, equipment electric, equipment AGD etc. made is with one section bent tape steel and rubber flange. holes on obu ends tape are reinforced steel plates, co ensures strength on clamping at large loads mechanical. tape made of carbon steel galvanized (W1), profile with rubber EPDM resistant to water, abrasion, changes temperatures and aging. A clamp not contains screws, washer and a nut. Material: steel carbon, galvanized (tape), EPDM rubber (flange). Band width: 15 mm.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A LET-LOK® straight fitting with thread external NPT for an inch tube Intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. The permissible pressure working specifies on the basis of diameter outer and wall thickness wall tubes (details in the attachment). Available in version full-bore - used often for mounting thermocouple, has diameter bore reamed for diameter tubes (marked...-TC on the end index). Material: steel AISI 316.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Directional valve plug-in adjustable, type R43, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Ferrule screw for hoses thermoplastic type MT1 or MTH1. Use only with fitting screw-together od this the same supplier (TI-S...). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for sandblasting, shot blasting SM1

          All products | Bulk material transfer hoses
          0 €
          Hose delivery for sandblasting extremely resistant to abrasion. thick Layer inner with rubber o exceptionally sound resistance to abrasion (36 mm 3 acc. to ISO 4649:2014). exceeds requirements standards ISO 3861:2008. The electrically conductive inner layer and antistatic outer layer prevent the accumulation of electric charges. Used for strongly abrasive materials such as quartz sand, steel shot, corundum, glass in abrasive blast treatment of steel structures, castings, concrete surfaces, etc.. Mounted with special sandblasting ends. Inner layer: black rubber NR/BR/SBR. Reinforcement: cord synthetic. Outer layer: black rubber SBR. Working pressure: 12 bar. Operating temperature: od -35°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for equipment firefighting CHICAGO®

          Air and water hoses | All products
          0 €
          Strong, flexible hose for water adapted for winding on drums. intended for use in high-pressure equipment firefighting and in vehicles fire ( booster hose ). Layer inner resistant to agents firefighting and foam-forming. Reinforcement made with thick layer high-strength cord. Layer outer resistant to conditions atmospheric. hose CHICAGO EN varies od basic version hose CHICAGO, made compliant with with the standard EN 1947: 2014 ( type C, class 1, category 2 ), whereas CHICAGO EN GL, made compliant with with the standard EN 1947, ale with luminescent layer external, enabling easy perceiving hose in darkness or at smoke. On special order available also versions hose compliant with the standard: ASTM C-542 and BS 3169. length standard roll: 60 m (120 m po confirmation for basic version hose). Inner layer: black EPDM rubber. Reinforcement: cord synthetic. Outer layer: black EPDM rubber (yellowish luminescent synthetic rubber – version GL). Working pressure: 40 bar. Operating temperature: od -40°C up to +100°C, od -20°C up to +60°C (EN 1947).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Very Light, flexible and very pliable hose intended for discharge aggressive chemical vapours and gases we all fields industry. excellent resistance chemical, high resistance temperature. hose is characterized high compressibility, resistance on impacts thanks to outer spiral. resistant to radiation UV, ozone, aging, conditions atmospheric, flame-retardant. available other diameter in the scope 50 ÷ 508 mm and version of spiral of steel stainless. Assembly of the hose on connectors with bridge clamps (lewo-handed). version PTFE EL CL - hose conductive electrically o resistance R ≤10 6 Ω, compliant with the directive ATEX 94/9/EC and the standard TRBS 2153, made with black PTFE. Checking chemical resistance - the chemical resistance table for PTFE (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: 3 or 6 m. Hose material: light-brown fabric glass coated Teflon (PTFE), o wall thickness 0.12 mm - version standard PTFE CL, fabric glass coated black conductive Teflon (PTFE), o wall thickness 0.15 mm - version antistatic PTFE EL CL. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -150°C up to +250°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose intended for oil installation hydraulic, fuels, liquids based on water. Do use in the vicinity transformers and installation electric medium and high voltage. Non-conductive - leakage under the standard's test conditions lower than 50 µA for a voltage of 246 kV/m over 5 min. standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: orange polyurethane. Working pressure: from 157 bar to 220 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water up to +65°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plug cap CAMLOCK DC, brass

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Plug cap coupling CAMLOCK DC made in accordance with the American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 10 bar, depending on the coupling size. Material: brass. Levers: steel AISI 304. Sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve directional electric, without a coil control PIV for mounting in-line. is to element pneumatics, which task is Control direction flow the medium working in pneumatic systems drive and control through connection or switching ways flow. appropriate for use with high frequency and short sometimes response. possible assembly in any position. Material body valve: aluminum. thread connection: M5 female, female BSP1/8”. medium working: filtered compressed air, oiled or not oiled. maximum Working pressure: from 6 bar to 30 bar, depending on kinds valve and a coil. Operating temperature: -15°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A STORZ fire coupling with thread internal BSP, brass

          All products | Symmetrical claw couplings
          0 €
          Adapter STORZ with thread internal BSP intended for installation transfer for liquid and bulk substances. used in firefighting, systems irrigation, industry chemical, food, agriculture etc. characterized by high, unobstructed diameter bore. O symmetrical construction parts connection, thanks to this in straight way combines je of each other. connect can element o the same spacing lugs. Material: brass. Working pressure: 16 bar. gasket: black NBR rubber.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Adapter - Tee high-pressure type A117 with thread internal BSP, with a nut swivel (sealing 60° cone). Material: steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Nozzle standard bent, for installation directly for body gun. length nozzle: 90 mm. Working pressure: 16 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Ring handle for coupling CAMLOCK, steel, type R

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Ring handle for coupling CAMLOCK, type R. Material: steel AISI 304.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Complete coupling push-in angled BANJO, type R54, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting hydraulic screw, type S, with a thread external metric, sealing on a 24° cone (CEL), series light. Intended for screwing in hoses rubber and thermoplastic using ferrule screw-together. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A 45° PUSH-ON end with thread internal BSP, type YBW310, intended for a self-clamping hose designed for this type of end. Mounted onto the hose without the use of clamps or brackets. It has a special barb profile adapted to the material and dimensions of the PUSH-ON hose and the construction of its braid, causing the hose to clamp onto the barbs of the end. The end must not be used with other hoses or clamped with clamps or brackets, as this risks damaging the hose. Operating temperature: od -40°C up to +80°C. Working pressure in accordance with the specification of the PUSH-ON hose Material: galvanised carbon steel, AISI 316 steel.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A sealing O-ring for a NiTO quick coupling, EPDM

          All products | Quick couplings for water
          0 €
          A sealing O-ring for a NiTO quick coupling. Material: EPDM. Operating temperature: up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A clamp RUBBER P-CLIP compliant with the standard DIN 3016 recommended for safe and damping vibrations mounting pipes, hoses, bundles cables, corrugated pipes electrical-installation (cover on cables) etc., for which exists possibility abrasion and damage. A clamp this type found wide use, m.in.: machine agricultural and construction, design engines combustion, industry railway, equipment electric, equipment AGD etc. made is with one section bent tape steel and rubber flange. holes on obu ends tape are reinforced steel plates, co ensures strength on clamping at large loads mechanical. tape made of steel stainless AISI 304 (W4), profile with rubber EPDM resistant to water, abrasion, changes temperatures and aging. version W4 recommended for applications in industry marine. A clamp not contains screws, washer and a nut. Material: steel AISI 304 (tape), EPDM rubber (flange). Band width: 20 mm.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fitting 90° type LET-LOK® with thread external NPT for a metric tube Intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. The permissible pressure working fittings specifies on the basis of a given size and type connections threaded (details in the attachment). Material: steel AISI 316.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fitting angled 90° adjustable JIC 37° with thread external BSPT (sealing on the thread – PTFE tape or anaerobic sealant). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for coolant, system 3/4″, LOC-LINE®

          Air and water hoses | All products
          0 €
          Hose for coolant in system 3/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x145 mm, 100 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 700 mm, 800 mm 900 mm and 1000 mm. Material: acetal. Working pressure: for 1.4 bar. maximum Flow rate: 5182 l/h. Operating temperature: up to +76°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for regrind plastics APD120 PU AS

          All products | Bulk material transfer hoses
          0 €
          Strong hose suction intended for conveying dry or liquid substances abrasive, granulates etc. externally Serrated, inside smooth. Layer inner with transparent, resistant to abrasion polyurethane. The hose has a copper wire arranged along the spiral which, after earthing or connection to an end, discharges electric charges. Widely used in processing plastics in use demanding greater resistance to abrasion, puncturing and cutting hose. especially recommended for regrind plastics o relatively sharp edges. Inner layer: transparent polyurethane. Reinforcement: rigid-PVC spiral. Hose material: transparent PVC. Working pressure: from 3 bar to 7 bar - depending on the diameter hose and temperatures. Vacuum: from 0.69 bar to 0.74 bar - depending on the diameter hose and temperatures. Operating temperature: od -5°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, very flexible and pliable, resistant chemical and temperature-wise two-layer hose intended for discharge most aggressive chemical vapours, gases, dusts and fibres (non-abrasive), air blowing hot air. very good resistance chemical on aggressive chemicals thanks to internal layer PTFE. W version standard inner Layer white natural PTFE meets requirements industry food (FDA). W version antistatic EL black inner Layer PTFE is electrically conductive (R ≤10 6 Ω). thanks to layer outer with fabric glass coated silicone and layer internal with PTFE hose is resistant to temperature for 250ºC. hose is characterized high compressibility - for 1:6, strong design resistant on vibration, stretching and tearing, resistance on impacts thanks to outer spiral. resistant to radiation UV, ozone, aging, conditions atmospheric, flame-retardant. used in industry chemical, metallurgy metals and foundry, industry ceramic and glass. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for PTFE (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Material hose Inner layer: white foil PTFE PTFE - version standard SILTEF, black conductive foil PTFE PTFE - version antistatic SITEF EL. Material hose Outer layer: fabric glass coated silicone, silver - grey. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -50°C up to +250°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. Inner layer: polyester. Reinforcement: a polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 110 bar to 130 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check type MRF OFC series COMPACT "O" for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling with thread internal. change setting at use a screwdriver, with the possibility mounting cover protective. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Material: brass nickel-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve reducing REG, series SYNTESI®, without end connections, serves for regulation pressure working and ensures correct operation, in connected za nim installation, independently od changing sie wear medium. W a valve used instead of diaphragm flat diaphragm shaped, which ensures greater value flow nominal thanks to greater surge diaphragm, greater sensitivity and speed reaction on change setting, thanks to reduction friction static and kinetic components and greater accuracy in maintaining set pressure output at change value flow and pressure supply. W case rise pressure output over value setting diaphragm opens valve trigger and vents reducer until for obtaining value pressure compliant with setting. mechanism type „push-lock” allows on locking a knob in any position through its pressing. Plate locking allows mounting padlock protective against unauthorised change setting pressure output. additional the connection with the front and with the back of size 1/8” can be used for connection pressure gauge, relay pneumo-electric or fittings push-in. drawn with these connections air is reduced. Size: SY1, SY2. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: od -10°C up to +50°C. Connection: 1/8" BSP female ÷ 3/8" for SY1 and 3/8" BSP female ÷ 1" for SY2. Additional connection for a pressure gauge or fittings: 1/8" BSP female for SY1 and 1/4" for SY2. Flow rate: 1200 l/min - 1/8", 2800 l/min - 1/4", 3350 l/min - 3/8" (SY1), 5300 l/min - 3/8" (SY2), 7400 l/min - 1/2", 7600 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A STORZ fire coupling with fitting for hose, aluminum

          All products | Symmetrical claw couplings
          0 €
          Coupling STORZ with fitting for hose intended for installation transfer for liquid and bulk substances. used in firefighting, systems irrigation, industry chemical, food, agriculture etc. characterized by high, unobstructed diameter bore. O symmetrical construction parts connection, thanks to this in straight way combines je of each other. connect can element o the same spacing lugs. available in version forged o pressure working up to 16 bar and in version cast, characterized by significantly smaller strength o pressure working up to 6 bar. Material: aluminum. Working pressure: 16 bar (coupling forged), 6 bar (coupling cast). gasket: white NBR rubber (coupling forged), black NBR rubber (coupling cast).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Adapter - Tee high-pressure type A111 with thread internal 3 x BSP (sealing on the thread). Material: steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A PUSH-ON end with thread external BSP, type YBZ110, intended for a self-clamping hose designed for this type of end. Mounted onto the hose without the use of clamps or brackets. It has a special barb profile adapted to the material and dimensions of the PUSH-ON hose and the construction of its braid, causing the hose to clamp onto the barbs of the end. The end must not be used with other hoses or clamped with clamps or brackets, as this risks damaging the hose. Operating temperature: od -40°C up to +80°C. Working pressure in accordance with the specification of the PUSH-ON hose. Material: galvanised carbon steel, brass, AISI 316 steel.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plug JIC with a male UNF thread of carbon steel, type ROV

          All products | Tube fittings for hydraulic pipes
          0 €
          Plug JIC 37° with thread external UNF (sealing on cone external 37°). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Straight connector with thread internal enabling connection quick couplings and hoses UHP of each other. Material: steel carbon, galvanized on black. Working pressure: 700 bar (at factor safety 4), 1000 bar (at factor safety 2.8).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A clamp RUBBER P-CLIP compliant with the standard DIN 3016 recommended for safe and damping vibrations mounting pipes, hoses, bundles cables, corrugated pipes electrical-installation (cover on cables) etc., for which exists possibility abrasion and damage. A clamp this type found wide use, m.in.: machine agricultural and construction, design engines combustion, industry railway, equipment electric, equipment AGD etc. made is with one section bent tape steel and rubber flange. holes on obu ends tape are reinforced steel plates, co ensures strength on clamping at large loads mechanical. tape made of steel stainless AISI 304 (W4), profile with rubber EPDM resistant to water, abrasion, changes temperatures and aging. version W4 recommended for applications in industry marine. A clamp not contains screws, washer and a nut. Material: steel AISI 304 (tape), EPDM rubber (flange). Band width: 12 mm.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Handy Feather for compressed air, intended for fast removing with surface all contaminants: liquids, fine chips, filings etc. made with anodized aluminum. equipped in nozzle with the possibility regulating flow one hand - od narrow for wide stream air. rubber a nozzle on the tip feather protects surfaces against scratching. terminated a plug EUROSTANDARD 7.2. Material: housing – aluminum protected method anodized; sealing – NBR. Diameter hole nozzle: 0 ÷ 3 mm. Flow rate nominal: 300 l/min at a pressure of 6 bar. pressure maximum: 12 bar. pressure operating: 1 ÷ 6 bar. Operating temperature: od -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A LET-LOK® straight fitting with thread external BSP for an inch tube Intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. The permissible pressure working specifies on the basis of diameter outer and wall thickness wall tubes (details in the attachment). Available in version full-bore - used often for mounting thermocouple, has diameter bore reamed for diameter tubes (marked...-TC on the end index). Material: steel AISI 316.
        Go to Top