0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control mechanical, a plunger of assist, used most often for control operation actuators. can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control mechanical, a plunger of assist, used most often for control operation actuators. can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control mechanical, a plunger, used most often for control operation actuators. can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control mechanical, a plunger, used most often for control operation actuators. can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control pneumatic, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 3/2 - three-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control pneumatic, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/3 - five-way, three-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control manual, a selector, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 3/2 - three-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control manual, a selector, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/2 - five-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve sequential, type VS30

          All products | Other high-pressure valves
          0 €
          Valves VS30 used in systems hydraulic as element fixing sequence supply a few actuators connection for one source supply. W case the system with two actuator, valve mounted is between source supply (1) a actuator (2), which has be powered in the other order. value pressure opening sets using screws (setting a wrench Allen, lock a lock nut). valves equipped are in holes assembly. should pay attention particularly attention, to not set value pressure larger than 260 bar (max. pressure use for aluminum body). Material: aluminum (body), steel galvanized (valve). sealing: NBR. Operating temperature: od -20°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve trigger angled with thread external BSP serves for bleeding air on example in order to equalisation pressure in installation. can be also used for removing with it condensate. compressed air can contain steam water, which po condensation converts in mixture water and oil called condensate. if not will be removed, can be cause failure both element installation, as and receivers compressed air. position mounting - any. Body material: brass. Material poppet: brass. sealing: NBR. Operating temperature: od 0°C up to +90°C. Working pressure: 25 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve trigger straight with seal metal - metal with thread external BSP serves for bleeding air on example in order to equalisation pressure in installation. can be also used for removing with it condensate. compressed air can contain steam water, which po condensation converts in mixture water and oil called condensate. if not will be removed, can be cause failure both element installation, as and receivers compressed air. position mounting - any. Body material: brass nickel-plated. Material poppet: brass. sealing: NBR. Operating temperature: od 0°C up to +90°C. Working pressure: 25 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type STP L 2/2 one-way in version with connection threaded with an O-ring on one side and coupling push-in on the other side (thread - line) intended for mounting directly in the connection supply actuator (in accordance with direction flow marked in the molds arrow on body valve). correctly connection valve STP L allows on free Flow rate air supply chamber working actuator, whereas not allows on jej venting without supply pressure control on Connection push-in Ø4 (Ø5/32”). Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Manual valve allowing on bleeding excess oil in installation with back for bowl and reduction accumulated pressure oil in system with valve. installed between part the system equipped in quick coupling, a part supply under pressure. Po bleeding excess oil hydraulic, connection quick couplings becomes possible. Material: steel galvanized (body), brass (valve). sealing: NBR. Operating temperature: up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve MFP securing configuration hydraulic against loss oil in case sudden depressurisation installation (e.g. rupture line). W during normal use the system, valve allows on Flow rate oil in both directions. W situation sudden rise flow (e.g. rupture line), valve closes Flow rate oil in one direction. permissible direction flow: A → A1 (free), A1 → A (valve). Material: steel carbon, galvanized (body), hardened steel (valve). sealing: metal-metal. Operating temperature: od -30°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Effective valve closing compatible of all installations pneumatic o standard wear compressed air, which task is protection the operator and installation pneumatic in case jej damage (e.g. rupture tubes or bursting hose). Meets the requirements of: EN 983 § 5.3.4.3.2, EN 4414 §5.4.5.11.1, ATEX Group II Category II, TÜV 01-02-0145, TÜV AZ 77318 2. valve should select taking into account: value flow, length and diameter hose, a also diameter internal element installation. W case questions or doubts please o contact with Tubes International. Connection: BSP male or BSP female (inlet) / BSP female (outlet). Material body: aluminum. Material piston: POM (1/4" ÷ 1/2"), aluminum (3/4"). Material spring: steel stainless. sealing: NBR. minimal pressure: 4 bar. Working pressure: 18 bar. Operating temperature: od -20°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve check type VNR L in version with connection threaded with an O-ring on one side and coupling push-in on the other side (thread - line), with holes for mounting wall. Working pressure: 12 bar. sealing: NBR. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve check type VNR L in version of coupling push-in on one side and with connection threaded with an O-ring on the other side (line - thread), with holes for mounting wall. Working pressure: 12 bar. sealing: NBR. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve check (lock hydraulic) type VRDE used in systems hydraulic as element securing against uncontrolled movement actuator double-acting operation (retraction / extension piston rod). the connection C1, C2 (od side actuator) equipped are in rings cutting and a nut acc. to DIN 2353. permissible direction flow: V1 → C1 (and simultaneously C2 → V2), V2 → C2 (and simultaneously C1 → V1). valve equipped is in hole assembly. Material: steel galvanized (body), hardened steel (stem). sealing: NBR. pressure opening: 3 bar. Operating temperature: od -20°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valves reducing serial REG, series SKILLAIR®, without plates end, serve for regulation pressure working, ensuring correct operation equipment. can be mounted in series and supplied this same pressure. each with valves can have different setting pressure output, independent od settings other valves. air output drawn is with the connection pressure gauge (1/8”). Size: 100. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar. Operating temperature: up to +50°C. Pressure gauge connection: 1/8" BSP female. Flow rate: 950 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valves reducing serial REG, series SKILLAIR®, with plates end, serve for regulation pressure working, ensuring correct operation equipment. can be mounted in series and supplied this same pressure. each with valves can have different setting pressure output, independent od settings other valves. air output drawn is with the connection pressure gauge (1/8”). Size: 100. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar. Operating temperature: up to +50°C. Connection: 1/4" BSP female or 3/8". Pressure gauge connection: 1/8" BSP female. Flow rate: 950 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Tank 1l for gun multifunction AKBO

          All products | Foam- washing- and dosing devices
          0 €
          Tank o capacity 1l on agent cleaning and foaming, with injector and nozzle for foam, with quick coupling for connection for gun multifunction AKBO MNAP2-BL.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Tank for set NiTO Clean, capacity 1.4 l

          All products | Foam- washing- and dosing devices
          0 €
          Tank on agent cleaning for set NiTO Clean. Available in various colors (green, blue, red and yellow) for facilitating identification used the inside. capacity: 1.4 liter.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Stopper electric for press P20 MSN

          All products | Hose and tube assembling machines
          0 €
          Stopper electric for press P20 MSN is one with option control press crimp. crimping has space po pressing line with fitting for alloy placed za head press.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Set F + D series SKILLAIR® o high degree reliability consists with filter and with filter accurate air. for the purpose set is cleaning air supplied through compressor and removal with high accuracy contaminants liquid and solid, contained in compressed air. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on size and kinds trigger. Filtration grade: Filter - 5 µm, Filter accurate - 99.97% at 0.01 µm. Connection: 1/4" BSP female ÷ 1". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Operating temperature: up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Set F + L series SKILLAIR® o high degree reliability consists with filter air and lubricator. for the purpose set is cleaning air supplied through compressor and lubrication mist oil. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on size and kinds trigger. Filtration grade: 5 µm, 20 µm, 50 µm. Connection: 1/4" BSP female ÷ 1". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Operating temperature: up to +50°C. Flow rate nominal: od 1200 for 4500 l/min (at an inlet pressure of 6 bar Δp = 1 bar), depending on size.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Assembly preparation compressed air F+L, series BIT

          Air preparation elements (FRL) | All products
          0 €
          Assembly preparation compressed air F + L, intended for series BIT. is to compact unit consisting with filter with various stages filtration and lubricator o high stability lubrication. advantages set: 1) high degree separation condensate. 2) manual/semi-automatic or automatic trigger condensate. 3) lubrication at low values flow. Size: 1/8", 1/4". Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Connection: 1/8" BSP female, 1/4". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 600 l/min - 1/4" (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Assembly preparation compressed air F+L, series NEW DEAL

          Air preparation elements (FRL) | All products
          0 €
          Assembly preparation compressed air F + L, intended for series NEW DEAL, consists sie with filter with various stages filtration and lubricator o high stability dosing. basic advantages: 1) metal tank with external preview level condensate. 2) manual/semi-automatic or automatic trigger condensate. 3) micrometric regulation doses lubrication. 4) guaranteed work at low values flow. Size: 1/4", 3/8", 1/2", 3/4", 1". Supply pressure: up to 18 bar, for trigger RA up to 10 bar. Operating temperature: up to +50°C. Connection: 1/4" BSP female, 3/8", 1/2", 3/4", 1". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 1000 l/min - 1/4", 3500 l/min - 3/8", 1/2", 9500 l/min - 3/4",1"(at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Assembly preparation compressed air FR+L, series SKILLAIR®

          Air preparation elements (FRL) | All products
          0 €
          Set FR + L series SKILLAIR® o high degree reliability consists with filter air and valve reducing and lubricator. for the purpose set is cleaning air supplied through compressor, reduction and stable maintaining pressure set at fluctuations pressure supply and lubrication mist oil. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on size and kinds trigger. Filtration grade: 5 µm, 20 µm, 50 µm. range pressure output: 0÷8, 0÷12 bar. Connection: 1/4" BSP female ÷ 1". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Operating temperature: up to +50°C. Flow rate nominal: od 800 for 4000 l/min (at an inlet pressure of 6 bar Δp = 1 bar), depending on size.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Set FRL series SKILLAIR® o high degree reliability consists with filter air, valve reducing and lubricator. for the purpose set is cleaning air supplied through compressor, reduction and stable maintaining pressure set at fluctuations pressure supply and lubrication mist oil. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on size and kinds trigger. Filtration grade: 5 µm, 20 µm, 50 µm. range pressure output: 0÷8, 0÷12 bar. Connection: 1/4" BSP female ÷ 1". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Operating temperature: up to +50°C. Flow rate nominal: od 800 for 4500 l/min (at an inlet pressure of 6 bar Δp = 1 bar), depending on size.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Assembly preparation compressed air FRL series NEW DEAL

          Air preparation elements (FRL) | All products
          0 €
          Assembly preparation compressed air FRL, with reducer type piston o high degree reliability, intended for series NEW DEAL, is characterized resistance on heavy conditions use. basic advantages: 1) stability pressure set at variable pressure supply. 2) metal tank with external preview level condensate. 3) dose lubrication proportional for flow air. 4) micrometric regulation doses lubrication. 5) guaranteed work at low values flow. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 18 bar, for trigger RA up to 10 bar. Filtration grade: 4 µm, 20 µm, 50 µm. Operating temperature: up to +50°C. Connection: 1/4" BSP female, 3/8", 1/2", 3/4", 1". Connection pressure-gauge: 1/8" BSP female for valve for 1/2", above - 1/4" BSP female. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 400 l/min - 1/4", 2000 l/min - 3/8", 1/2", 3600 l/min - 3/4", 3700 l/min - 1" (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Assembly preparation compressed air FRL, series BIT

          Air preparation elements (FRL) | All products
          0 €
          Complete unit mini-FRL series BIT with diaphragm shaped. is characterized high value flow at reduced a drop pressure, high degree separation condensate, dose lubrication proportional for flow air, the possibility use at low values flow. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Filtration grade: 5 µm, 20 µm, 50 µm. Connection: 1/8" BSP female, 1/4". Pressure gauge connection: 1/8" BSP female. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 280 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Assembly preparation compressed air VFR+L, series SKILLAIR®

          Air preparation elements (FRL) | All products
          0 €
          Set VFR + L series SKILLAIR® o high degree reliability consists with valve shut-off, filter air, valve reducing and lubricator. for the purpose set is cleaning air supplied through compressor, reduction and stable maintaining pressure set at fluctuations pressure supply and lubrication mist oil. task valve shut-off is separation the system working od air supply, co occurs in position closed, simultaneously venting configuration. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on size. range pressure output: 0÷8, 0÷12 bar. Filtration grade: 20 µm. Connection: 1/4" BSP female ÷ 1". Condensate drain: manual / semi-automatic (RMSA). Operating temperature: up to +50°C. Flow rate nominal: od 800 for 4000 l/min (at an inlet pressure of 6 bar Δp = 1 bar), depending on size.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Set equipped in Miniature quick coupling measurement DN1.2 production Swedish intended for measuring pressure static, dynamic and vacuum in systems hydraulic. based on classic the structure quick coupling type „push to connect” with mechanism locking plug consisting with balls, spring and ferrule locking. socket and plug equipped are in valves ensuring Leak-free connection and disconnection and tightness, even at vacuum 90%. plugs measurement made with hardened steel, durable and maintenance-free. connections with thread external sealed using an O-ring recessed in surface front (type A) or an O-ring at surface face (type B). ensures to straight and fast configuring connections. other element set measurement molds pressure gauge (no in set) mounted in holders measurement, adapters and hoses measurement. valve venting in holder measurement allows on removal bubbles air with the system, co increases accuracy measuring pressure dynamic. set It can be used for measurements pressure on machines equipped we plugs measurement TEMA SYSTEM 100 (some machine working e.g. VOLVO, HIAB, SAMSUNG) or through assembly plugs in system during measuring. flexible Adapter TA-M-139 allows on use set for measuring on Widely usedch couplings with thread M16x2. Do measurements using set can use each appropriate type pressure gauge (no in set) with typical connection pressure-gauge with thread external 1/4” BSP. recommended version pressure gauge: pressure gauge 63 mm type FM-631 - Connection with bottom. sealing pressure gauge in the socket handle using washer on thread and an O-ring 10.8x2.2, or washer pressure-gauge inside socket. set supplied is in plastic case and contains the following element: 1. A handle measuring for switching at low pressure (Connection for pressure gauge 1/4” BSP, socket quick coupling, air vent). 2. plug measuring, 1/8" BSP male, type A, cap plastic. 3. hose measuring (DN2, 630 bar), L=2.5 m with a plug quick coupling TA-M-120 and socket TA-M-150. 4. Adapter, 1/4" BSP female / 1/8" BSP male, type A. 5. Adapter, 1/8" BSP female / 1/4" BSP male, type B. sealing: NBR rubber. Working pressure: up to 600 bar, for plugs TA-M-120 - 400 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Set nozzles for gun NiTO II

          All products | Low-pressure water spray guns
          0 €
          Set nozzles outlet for gun NITO II. nozzles 20, 30 and 60 l/min (5 bar), made with brass. wrench Allen 3 mm for mounting nozzles. Material: brass.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Set nozzles for gun suction, series 474

          All products | Special air guns
          0 €
          Set nozzles (suction) for gun suction (slot long and wide). Material: plastic plastic.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Set wrenches socket 1/2″, series 741

          All products | Special air guns
          0 €
          Set high-strength wrenches socket 1/2" o sizes 17, 19 and 21 mm, coated plastic artificial. available in various colors, in order to facilitating identification size. whole closed in convenient plastic box. compatible with a wrench pneumatic EW-741160.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Basic set measuring intended is for diagnostics installation hydraulic and pneumatic through measurement pressure static, dynamic and vacuum. set contains plastic case with prepared space on two pressure gauge 63 mm and hose DN2 (630 bar) with fitting: measurement M16x2 female and for pressure gauge female 1/4” BSP o length 2000 mm. set not contain pressure gauge, which should select and separately order. Material ends hose: steel with coating zinc nickel. Working pressure: up to 630 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Set measuring intended is for diagnostics installation hydraulic and pneumatic through measurement pressure static, dynamic and vacuum. set contains plastic case with prepared space on two pressure gauge 63 mm, hose DN2 (630 bar) with two fitting measurement M16x2 female o length 2000 mm and coupling and adapters: 1. coupling measurement M16x2 with a cap metal, with male thread 1/4” BSP, type E - 2 pcs 2. coupling measurement M16x2 with a cap metal, with male thread M8x1, type F - 1 pcs 3. coupling measurement M16x2 with a cap metal, with male thread M10x1, type F - 1 pcs 4. Connection with female thread 1/4” BSP for pressure gauge, bulkhead, with male thread M16x2 - 2 pcs 5. Connection with female thread 1/4” BSP for pressure gauge, with female thread M16x2 - 1 pcs 6. Adapter reducing male 3/8” BSP / M10x1 female, type E - 1 pcs 7. Adapter reducing male 1/2” BSP / M10x1 female, type E - 1 pcs set not contain pressure gauge, which should select and separately order. Material fittings: steel with coating zinc nickel. sealing: NBR. Working pressure: up to 630 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Set measuring intended for diagnostics systems hydraulics power through measurement pressure. set supplied is in plastic case in following configuration: 1. pressure gauge glycerine 63 mm, Connection bottom 1/4” BSP, 0 ÷ 100 bar, pressure gauge glycerine 63 mm, Connection bottom 1/4” BSP, 0 ÷ 250 bar, pressure gauge glycerine 63 mm, Connection bottom 1/4” BSP, 0 ÷ 400 bar. 2. coupling measurement M16x2 with a cap plastic, with male thread 1/4” BSP, type E, coupling measurement M16x2 with a cap plastic, with male thread 3/8” BSP, type E. 3. coupling measurement M16x2 with a cap plastic, with male thread 1/4” NPT, type C, coupling measurement M16x2 with a cap plastic, with male thread 3/8” NPT, type C. 4. coupling measurement M16x2 with a cap plastic, with male thread M10x1, type F, coupling measurement M16x2 with a cap plastic, with male thread 7/16”-20 UNF, type F, coupling measurement M16x2 with a cap plastic, with male thread 9/16”-18 UNF, type F. 5. coupling measurement M16x2 with a cap metal, with connection DIN 2353 with female thread M18x1.5, 12L. 6. cap metal M16x2. 7. Connection with female thread 1/4” BSP for pressure gauge, with female thread M16x2, Connection with female thread 1/2” BSP for pressure gauge, with female thread M16x2. 9. Connection with female thread 1/4” BSP for pressure gauge, bulkhead, with male thread M16x2. 10. hose DN2 (630 bar) with two fitting measurement M16x2 female L = 1 m, hose DN2 (630 bar) with two fitting measurement M16x2 female L = 2 m. Material fittings: steel galvanized. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Set measuring intended for diagnostics systems hydraulics power through measurement pressure. set supplied is in plastic case in following configuration: 1. pressure gauge glycerine 63 mm, Connection bottom 1/4” BSP, 0 ÷ 160 bar, pressure gauge glycerine 63 mm, Connection bottom 1/4” BSP, 0 ÷ 315 bar. 2. coupling measurement M16x2 with a cap plastic, with male thread 1/4” BSP, type E, coupling measurement M16x2 with a cap plastic, with male thread 3/8” BSP, type E. 3. coupling measurement M16x2 with a cap plastic, with male thread 1/4” NPT, type C. 4. coupling measurement M16x2 with a cap plastic, with male thread M10x1, type F. 6. cap metal M16x2. 7. Connection with female thread 1/4” BSP for pressure gauge, with female thread M16x2. 8. Connection angled 90° with female thread 1/4” BSP for pressure gauge, with male thread M16x2. 10. hose DN2 (630 bar) with two fitting measurement M16x2 female L = 1.5 m. Material fittings: steel galvanized. sealing: NBR.
        Go to Top