Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality two-way ball valve type BKH with thread internal BSP, intended for high-pressure installation hydraulic and industrial. in order to correct selection valve for media other than oil hydraulic and for high temperatures use, should consult with Tubes International. pressure working dependent od material seal valve. Material: steel (body, ball, stem). seal: PA, PVDF or PTFE (ball), NBR or FKM (stem). Operating temperature: od -40°C up to +100°C (PA); od -40°C up to +150°C (PVDF); od -200°C up to +250°C (PTFE); od -20°C up to +100°C (NBR); od -20°C up to +200°C(FKM).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve check type FPR intended for closing flow liquids hydraulic in one direction and opening free flow liquids in direction opposite. standard pressure opening: 0.5 bar (available also 3, 6 and 10 bar). permissible direction flow A → A1. Material: steel galvanized (body), hardened steel (stem). sealing: metal-metal. Operating temperature: od -30°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-way ball valve type RKH with thread internal BSP, intended for high-pressure installation hydraulic and industrial. in order to correct selection valve for media other than oil hydraulic and for high temperatures use, should consult with Tubes International. Material: steel stainless AISI 316Ti (body, ball, stem). seal: POM or PTFE (ball), NBR or FKM (stem). Operating temperature: od -40°C up to +100°C (POM); od -200°C up to +250°C (PTFE); od -20°C up to +100°C (NBR); od -20°C up to +200°C(FKM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve check type FPR intended for high-pressure installation hydraulic and industrial. closes Flow rate medium in one direction and opens free Flow rate medium in direction opposite. standard pressure opening: 0.5 bar (available also 2.5, 5 and 10 bar). permissible direction flow A → A1. Material: steel AISI 316 (body), steel AISI 316 (stem). sealing: FKM. Operating temperature: od -10°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality two-way ball valve with threads internal BSP and holes mounting in body, intended for high-pressure installation hydraulic. Material: steel (body, ball, stem). seal: POM (ball), NBR (stem). Operating temperature: od -40°C up to +100°C (POM); od -40°C up to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve check Controlled (lock hydraulic) type FPD used in systems hydraulic as element securing against uncontrolled movement actuator double-acting operation (retraction / extension piston rod). The permissible directions flow: V1 → C1 (and simultaneously C2 → V2), V2 → C2 (and simultaneously C1 → V1). Material: steel galvanized (body), hardened steel (stem). sealing: NBR. pressure opening: 3 bar, for size thread 3/4" - 0.5 bar. Operating temperature: od -20°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve check Controlled type FPDL used in systems hydraulic as element securing against uncontrolled movement actuator double-acting operation (retraction / extension piston rod). The permissible directions flow: V1 → C1 (and simultaneously C2 → V2), V2 → C2 (and simultaneously C1 → V1). valve equipped in 2 holes assembly shown on photo. Material: body - steel galvanized (1/4", 3/8"), aluminum (1/2", 3/4"); stem - hardened steel. sealing: NBR. pressure opening: 3 bar. Operating temperature: od -20°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFour-way ball valve "X" type MKHX with thread internal BSP, intended for high-pressure installation hydraulic. standard equipped in holes assembly. Material: steel (body, ball, stem). seal: POM (ball), NBR (stem). Operating temperature: od -40°C up to +100°C (POM); od -20°C up to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality three-way ball valve type "L" with threads internal BSP and holes mounting in body, intended for high-pressure installation hydraulic. Material: steel (body, ball, stem). seal: POM (ball), NBR (stem). Operating temperature: od -40°C up to +100°C (POM); od -20°C up to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve FPS allows free Flow rate liquids hydraulic in one direction (A → A1) and opening flow liquids in direction opposite (A1 → A) under a condition supply pressure signal control "X". standard pressure opening flow free (A → A1) 0.5 bar. required pressure signal control "X" for opening flow in direction opposite (A1 → A) determined is through product coefficient actuation and pressure po side A1. Material: steel galvanized (body), hardened steel (stem). sealing: NBR. Operating temperature: od -20°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValves check type VNRO / VNROHP intended for closing flow liquids hydraulic in one direction and opening free flow liquids in direction opposite. standard pressure opening 1 bar (available also with other pressure opening from 0.2 bar to 6 bar). permissible direction flow: A → A1. valves type VNROHP equipped are in additional ring sealing allowing on operation at maintaining higher coefficient safety. Material body and stem: steel carbon with coating zinc - nickel, steel stainless AISI 316Ti. sealing: NBR - steel carbon, Viton (FPM) - steel stainless. Operating temperature: od -35°C up to +100°C (NBR); od -20°C up to +200°C (Viton).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality three-way ball valve "L" type BK3L with thread internal NPT, intended for high-pressure installation hydraulic. Material: steel (body, ball, stem). seal: POM (ball), NBR (stem). Operating temperature: od -40°C up to +100°C (POM); od -20°C up to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality two-way ball valve type BKH L/S with external thread metric, DIN 2353, intended for high-pressure installation hydraulic. occurs as: L (series light), S (series heavy). Material: steel (body, ball, stem). seal: PA (ball), NBR (stem). Operating temperature: od -40°C up to +100°C (PA): od -20°C up to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve check type FPRI used in systems hydraulic as element for closing flow liquids hydraulic in one direction and opening free flow liquids in direction opposite. Intended for screwing into an appropriately deep threaded hole. supplied Together with an O-ring, which constitutes sealing between valve, a threaded a hole. O-ring can install with one or the other side valve (depending on direction flow, which we want obtain). standard pressure opening: 0.5 bar. permissible direction flow A → A1. Material: steel galvanized (body), hardened steel (stem). sealing: NBR. Operating temperature: od -20°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve check type R-4000 designed and made in accordance with the directive PED 2014/68/UE. intended for high-pressure installation hydraulic and industrial. closes Flow rate medium in one direction and opens free Flow rate medium in direction opposite. standard pressure opening: 0.5 bar (available also 1, 2, 3 and 5 bar). permissible direction flow: A → A1. Material: steel galvanized, brass nickel-plated, steel stainless AISI 316L. sealing: NBR - standard RA, RL; Viton (FKM) - standard RZ; EPDM - option. Operating temperature: od -20°C up to +100°C (NBR); od -20°C up to +200°C (Viton); od -40°C up to +150°C (EPDM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality three-way ball valve "L" type BK3L with thread internal BSP, intended for high-pressure installation hydraulic. Material: steel (body, ball, stem). seal: POM (ball), NBR (stem). Operating temperature: od -40°C up to +100°C (POM); od -20°C up to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality two-way ball valve type BKH with thread internal NPT, intended for high-pressure installation hydraulic and industrial. in order to correct selection valve for media other than oil hydraulic and for high temperatures use, should consult with Tubes International. pressure working dependent od material seal valve. Material: steel (body, ball, stem). seal: PA (ball), NBR (stem). Operating temperature: od -40°C up to +100°C (PA); od -20°C up to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality two-way ball valve type SKH with thread internal BSP, intended for high-pressure installation hydraulic and industrial. in order to correct selection valve for media other than oil hydraulic and for high temperatures should consult with Tubes International. pressure working dependent od material seal valve. Material: steel (body, ball, stem). seal: POM or PTFE (ball), NBR or FKM (stem). Operating temperature: od -40°C up to +100°C (POM); od -200°C up to +250°C (PTFE); od -20°C up to +100°C (NBR); od -20°C up to +200°C (FKM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-way ball valve type BKH L/S with external thread metric, DIN 2353, intended for high-pressure installation hydraulic. occurs as: L (series light), S (series heavy). Material: steel (body, ball, stem). seal: POM (ball), NBR (stem). Operating temperature: od -40°C up to +100°C (POM): od -20°C up to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality three-way ball valve "L" type SK3L with thread internal BSP, intended for high-pressure installation hydraulic. Material: steel (body, ball, stem). seal: POM (ball), NBR (stem). Operating temperature: od -40°C up to +100°C (POM); od -20°C up to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLever hand Intended for valves ball two-way and three-way standard types. in order to correct selection, should check dimension SW square stem a ball valve. Material: alloy zinc.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve switching 3-way, normally closed, used in systems hydraulic for control direction flow liquids working. Control carried out is using lever manual. Material: cast iron (body), hardened steel (stem). sealing: NBR. Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve switching 3-way, normally open, used in systems hydraulic for control direction flow liquids working. Control carried out is using lever manual. Material: body - cast iron, stem - hardened steel. sealing: NBR. Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA monoblock Directional valve spool YFM55 Controlled hand lever of centering springs. intended for systems hydraulic cranes, lifts, machine construction, agricultural etc. standard equipped in valve safety type C (set on 140 bar) and spools type 1. Material: cast iron (body), steel hardened (spools). sealing: NBR. maximum Working pressure: 315 bar. maximum pressure return: 25 bar. Operating temperature: od -20°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA monoblock Directional valve spool YFM35 Controlled hand lever of centering springs. intended for systems hydraulic cranes, lifts, machine construction, agricultural etc. standard equipped in valve safety type C (set on 140 bar) and spools type 1. Material: cast iron (body), steel hardened (spools). sealing: NBR. maximum Working pressure: 315 bar. maximum pressure return: 25 bar. Operating temperature: od -20°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA monoblock Directional valve spool YFM80 Controlled levers manual of centering springs. intended for systems hydraulic cranes, lifts, machine construction, agricultural, etc. standard equipped in valve safety (set factory on 180 bar) and spools type 1. Material: cast iron (body), hardened steel (spools). sealing: NBR. maximum Working pressure: 250 bar. maximum pressure return: 50 bar. Operating temperature: od -20°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA monoblock Directional valve spool YFM120 Controlled levers manual of centering springs. intended for systems hydraulic cranes, lifts, machine construction, agricultural, etc. standard equipped in valve safety (set factory on 180 bar) and spools type 1. Material: cast iron (body), hardened steel (spools). sealing: NBR. maximum Working pressure: 250 bar. maximum pressure return: 50 bar. Operating temperature: od -20°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA monoblock spool directional valve YE45, electrically controlled, with centering springs. intended for systems hydraulic cranes, lifts, machine construction, agricultural, etc. standard equipped in valve safety type C (set factory on 140 bar) and spools type 1. Material: cast iron (body), steel hardened (spools). sealing: NBR. maximum Working pressure: 250 bar. maximum pressure return: 25 bar. Voltage control: 12V DC. Operating temperature: od -20°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-way ball valve with threads external metric, intended for high-pressure installation hydraulic. equipped in holes assembly. used in systems hydraulic as element limiting stroke actuator. Do hole in lever mounted is cable connected with piston rod or element moved actuator. Po reaching stroke valve closes supply oil for actuator. straight and economical solution used e.g. in trailers self-dumping in agriculture. Material: steel (body, ball, stem). seal: POM (ball), NBR (stem). Operating temperature: od -40°C up to +100°C (POM); od -20°C up to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality two-way ball valve type SKH L/S with external thread metric, DIN 2353, intended for high-pressure installation hydraulic. Material: steel (body, ball, stem). seal: POM (ball), NBR (stem). Operating temperature: od -40°C up to +100°C (POM); od -20°C up to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThree-way ball valve "L" type RK3L with thread internal BSP, intended for high-pressure installation hydraulic and industrial. in order to correct selection valve for media other than oil hydraulic and for high temperatures use, should consult with Tubes International. Material: steel stainless AISI 316Ti (body, ball, stem). seal: POM or PTFE (ball), FKM (stem). Operating temperature: od -40°C up to +100°C (POM); od -200°C up to +250°C (PTFE); od -20°C up to +200°C(FKM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThree-way ball valve "L" type SK3L with thread internal NPT, intended for high-pressure installation hydraulic. Material: steel (body, ball, stem). seal: POM (ball), NBR (stem). Operating temperature: od -40°C up to +100°C (POM); od -20°C up to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve check (lock hydraulic) type VRDE used in systems hydraulic as element securing against uncontrolled movement actuator double-acting operation (retraction / extension piston rod). the connection C1, C2 (od side actuator) equipped are in rings cutting and a nut acc. to DIN 2353. permissible direction flow: V1 → C1 (and simultaneously C2 → V2), V2 → C2 (and simultaneously C1 → V1). valve equipped is in hole assembly. Material: steel galvanized (body), hardened steel (stem). sealing: NBR. pressure opening: 3 bar. Operating temperature: od -20°C up to +100°C.
