- Home
- Industrial hoses
- Steam hoses
Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and very pliable and flexible hose delivery of reinforcement two braids steel intended for conducting steam saturated o higher pressure. Layer inner resistant to steam o high temperature. Layer outer resistant to high temperature and conditions atmospheric. Do steam water use special fittings bolted screws intended for steam water – precisely selected for diameter and wall thickness hose. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. Inner layer: black EPDM rubber. Reinforcement: a double steel braid. Outer layer: red EPDM rubber, micro-perforated. Working pressure: 18 bar. Operating temperature: od -40°C up to +210°C (momentarily up to +230°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft and flexible hose delivery o reinforcement textile intended for conducting steam saturated. Layer inner o sound resistance to high temperature and steam saturated. Layer outer resistant to temperature, abrasion, conditions atmospheric and ozone. hose Widely used in industry for low-pressure steam saturated – for light applications. Do steam water use special fittings bolted screws intended for steam water. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. Inner layer: black EPDM rubber. Reinforcement: cord synthetic. Outer layer: black EPDM rubber, micro-perforated. Working pressure: 6 bar. Operating temperature: od -40°C up to +170°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure hose delivery, of reinforcement steel, intended for conducting steam superheated. Layer outer resistant to high temperature and conditions atmospheric. Not intended for steam cleaners ("dry steam cleaners"). Do steam water use special fittings bolted screws intended for steam water. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black EPDM rubber. Reinforcement: double cord with wire steel. Outer layer: black or red EPDM rubber, micro-perforated. Working pressure: 18 bar. Operating temperature: od -40°C up to +210°C (momentarily up to +232°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for cleaning and washing installation and machine in industry food steam water and hot water. Layer inner Meets FDA requirements 21 CFR 177.2600 and BfR XXI kat.2. Layer outer resistant to fats vegetable and animal. hose high quality, commonly used for cleaning and washing hot water or steam installation and machine in industry food (e.g. dairies, industry meat). Note: not should use hose simultaneously for water and steam water. Do steam water use special fittings bolted screws intended for steam water. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. length standard roll: 60 m (or 120 m - contact with Tubes International). Inner layer: white rubber butyl. Reinforcement: cord synthetic. Outer layer: blue NBR rubber/PVC. Working pressure: 6 bar (10 bar - for water). factor safety: 10:1 (3:1 - for water). Operating temperature: od -30°C up to +165°C (od -30°C up to +95°C - for water).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, strong and flexible hose delivery compliant with dimensions and requirements standards EN ISO 6134:2005 type 2 class A (Ω), of reinforcement steel, intended for conducting steam saturated and superheated. Layer inner o sound resistance to high temperature and steam saturated. It can be used momentarily for steam superheated o temperature 232°C and pressure 18 bar, longer use with steam superheated reduces service life hose. Layer outer resistant to temperature, conditions atmospheric, abrasion and aging. antistatic R ≤10 6 Ω. hose used in industry chemical, petrochemical, power and in other use industrial. Not intended for steam cleaners ("dry steam cleaners"). Do steam water use special fittings bolted screws intended for steam water. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black EPDM rubber. Reinforcement: double cord with wire steel. Outer layer: black EPDM rubber, micro-perforated. Working pressure: 18 bar. Operating temperature: od -40°C up to +210°C (momentarily up to +232°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery intended for conducting steam saturated, o sound resistance to high temperature, abrasion and ozone. on request Available hose acc. to standards EN ISO 6134:2005 type 1 class A. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black EPDM rubber. Reinforcement: cord synthetic. Outer layer: black EPDM rubber. Working pressure: 6 bar. Operating temperature: od -40°C up to +165°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible hose delivery of reinforcement steel for conducting steam saturated. Layer inner o sound resistance to high temperature, steam saturated and phenomenon pop-corningu (destruction layer internal through penetration condensate steam). withstands momentarily steam superheated o temperature 230°C and pressure 18 bar, longer use with steam superheated reduces service life hose. Layer outer resistant to temperature, conditions atmospheric, abrasion and aging. hose used in industry chemical, petrochemical, power and in other use industrial. Not intended for steam cleaners ("dry steam cleaners"). Do steam water use special fittings bolted screws intended for steam water. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. factor safety: 10:1. length standard: 60 m. Inner layer: black rubber IIR. Reinforcement: double cord with wire steel. Outer layer: red EPDM rubber, micro-perforated. Working pressure: 18 bar. Operating temperature: od -40°C up to +210°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality Gun for steam meeting requirements safety use with steam water. equipped in Swivel coupling for hose. Available with wide range equipment – different kinds lances and nozzles. used for washing and cleaning steam equipment, equipment, floors, defrosting equipment external. incoming for gun a hose steam is in center gun redirected for valve shut-off against leakage through lance and nozzle. ergonomically designed trigger reduces force opening valve. release trigger causes Automatic shut-off inflow steam, securing against jej undesirable outflow and possible accidents. special insulation thermal gun (perforated A guard with sheet stainless on bridges with resistant thermally plastic) eliminates risk burns. A handle gun can be easily remounted on the other side, for operation through the operator left-hand (not enters in composition gun and should order separately!). standard Gun equipped is in Swivel coupling, co prevents tightening hose during use. Gun is often used together with of specialized valve for steam – available on request. selection configuration gun in contact with Tubes International. Material: steel stainless (main element, resistant thermally plastic. sealing: PTFE with fiber glass. Working pressure: 10 bar. Operating temperature: up to +180°C (momentarily up to +210°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp shell Heavy Duty in version economical intended primarily for hoses rubber for steam water for mounting ends for steam type SSF. made according to EN 14423 (DIN 2826). screws and a nut of steel zinc-plated (for clamps with brass), of steel stainless (for clamps of steel stainless). a clamp should select for diameter internal hose and for wall thickness wall hose acc. to size nominal clamp, tak, to Diameter outer mounted hose fit in given for clamp the scope. initial tightening clamp requires use long bolts auxiliary. Material: steel AISI 316, brass. Operating temperature: for + 230°C. Working pressure: 18 bar (+ 210°C) – steam saturated, other use: selection in contact with TUBES INTERNATIONAL®.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting with thread internal BSP, type SSF (version economical). Intended primarily for hoses rubber for steam water, with serrated tail and with a lock, for mounting in hose at means clamps shell for steam (type Heavy Duty). made in accordance with EN 14423 (DIN 2826). Material: steel AISI 304, brass. Working pressure: 18 bar (+210°C) – steam saturated, other use: selection in contact with Tubes International.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFittings with thread internal BSP and NPT for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps for steam type BOSS SBC. complete A fitting consists with three parts – fittings ball GB with spigot („tail”) for hose, a nut wing B of special thread internal (NPS) and special adapter GFB with thread external (NPS) such as in nut and thread internal compliant with size fittings. Adapter GFB has tapered an insert polymer or copper, cooperating with fitting ball. creates to tight, resistant to action steam and high temperatures connection, which is at the same time easy for unscrewing and screwing without use special tools, using a nut wing. Material: steel/cast iron galvanized. Working pressure: 18 bar (+210°C) - steam saturated. Operating temperature: up to +230°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp SBC (Steam Bolt Clamp) with cast iron galvanized, steel stainless (cast steel) AISI 316 and brass, bolted screws, with claws for lock (flange) ends. intended primarily for mounting ends for steam type GF and MS BOSS in hoses rubber for steam water. a clamp should precisely select both for size (diameter internal) hose, as and actual diameter outer hose, a in period operation should je periodically check and optionally tighten. depending on size, clamp differ od each other shape, amount claws and amount bolts mounting. Material: cast iron galvanized, steel stainless AISI 316, brass. Working pressure: 18 bar (+210°C) - steam saturated. Operating temperature: up to +230°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting with thread external BSPT, type SSF (version economical). Intended primarily for hoses rubber for steam water, with serrated tail and with a lock, for mounting in hose at means clamps shell for steam (type Heavy Duty). made in accordance with EN 14423 (DIN 2826). Material: steel AISI 304, brass. Working pressure: 18 bar (+210°C) – steam saturated, other use: selection in contact with Tubes International.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, strong and flexible hose delivery of reinforcement steel and with layer external resistant on oil, for conducting steam saturated and superheated. Layer inner o sound resistance to high temperature and steam saturated. It can be used momentarily for steam superheated o temperature 232°C and pressure 18 bar, longer use with steam superheated reduces service life hose. Layer outer resistant to oil, temperature, conditions atmospheric, abrasion and aging. hose used in industry chemical, petrochemical, power and in other use industrial, in particular tam, where required is resistance layer outer on oils, greases and other products petrochemical. Not intended for steam cleaners ("dry steam cleaners"). Do steam water use special fittings bolted screws intended for steam water. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. hose VAPOFER EN ISO 6134 is version antistatic (R ≤10 6 Ω), compliant with the standard EN ISO 6134/05 type 2 class B (Ω). Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black EPDM rubber. Reinforcement: double cord with wire steel. Outer layer: black synthetic rubber, micro-perforated. Working pressure: 18 bar. Operating temperature: od -40°C up to +210°C (momentarily up to +232°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality A clamp shell Heavy Duty Intended primarily for hoses rubber for steam water for mounting ends for steam type VSS, MSS, FSS, SSF. made (sizes 1/2” for 2”) according to EN 14423 (DIN 2826). screws and a nut of galvanized steel (for clamps with brass), of steel stainless (for clamps of steel stainless).a clamp should select for diameter internal hose and for wall thickness wall hose acc. to size nominal clamp, tak, to Diameter outer mounted hose fit in given for clamp the scope. initial tightening clamp requires use long bolts auxiliary. Material: brass, steel AISI 316. Operating temperature: for + 230°C. Working pressure: 18 bar (+ 210°C) – steam saturated, other use: selection in contact with TUBES INTERNATIONAL®.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFittings with thread external tapered BSPT and NPT for hoses rubber for steam water, with serrated tail for hose, with a lock ensure safe connection hose with installations. mounted for hose with use clamp for steam SBC type BOSS. sealing on the thread tapered BSPT or NPT using packing (e.g. tape PTFE). depending on size and kinds material, fittings can differ shape tail. Material: steel galvanized, cast iron galvanized, steel stainless AISI 316, brass. Working pressure: 18 bar (+210°C) - steam saturated. Operating temperature: up to +230°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality fittings with thread internal BSP. intended for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps shell for steam (type Heavy Duty). sealing ends using special the gasket fiber (Frenzelit®), flat for version of galvanized steel and brass, and PTFE for steel stainless. Material: steel galvanized, steel AISI 316, brass. Operating temperature: up to +230°C. Working pressure: 18 bar (+210°C) - steam saturated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting FSS with a flange fixed, for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps shell for steam (EN 14423, DIN 2826, sizes 1/2” for 2”). Flange according to European standards (EN 10092-1) PN40 and PN16 and according to American ASA (ASME) standards 150 PSI and 300 PSI. Material: steel galvanized. Working pressure: 18 bar (+210°C) for steam saturated and in accordance with pressure working given class flange in tej temperature; for other applications in accordance with pressure working for given class flange (e.g. PN40) - selection in contact with Tubes International.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality fittings with thread external BSPT and NPT. intended for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps shell for steam (type Heavy Duty). sealing ends with thread external - on the thread ( e.g. band Teflon); in case thread BSPT, exists possibility seal flat on surface butt. Material: steel galvanized, steel AISI 316, brass. Operating temperature: up to +230°C. Working pressure: 18 bar (+210°C) - steam saturated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn adapter for a ball end and a wing nut. W made of steel zinc-plated, has special an insert polymer or copper on surface tapered cooperating with ball surface sealing fittings. It is tightened to the ball end by means of a wing nut. creates to tight, resistant to action steam and high temperatures connection, which is at the same time easy for unscrewing and screwing without use tools. thread a nut wing has different (greater) size than thread internal adapter GFB. Adapter GFB constitutes typical part complete fittings for steam with thread internal. use adapter allows creating various connections, depending on element used in installation. Material: steel galvanized. Working pressure: 18 bar (+210°C) - steam saturated. Operating temperature: up to +230°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNuts wing B, used as parts interchangeable ends GF system BOSS. enable at use fittings GB and various adapters GFB, GMB, GDB flexible configuring complete ends GF, also in versions mixed material. Material: steel or cast iron galvanized, steel AISI 316, brass. Working pressure: 18 bar (+210°C) - steam saturated. Operating temperature: up to +230°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFittings ball GB, used as parts interchangeable ends GF system BOSS. enable at use a nut B and various adapters GFB, GMB, GDB flexible configuring complete ends GF, also in versions mixed material. On request available are also selected fittings of steel AISI 316 or brass. Material: steel or cast iron galvanized. Working pressure: 18 bar (+210°C) - steam saturated. Operating temperature: up to +230°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector for sections rubber hoses for steam water. intended for mounting using clamps for steam SBC (type BOSS). Material: steel or cast iron galvanized. Working pressure: 18 bar (+210°C) - steam saturated. Operating temperature: for +230°.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn adapter for a ball end and a wing nut. W made of steel zinc-plated, has special an insert polymer or copper on surface tapered cooperating with ball surface sealing fittings. It is tightened to the ball end by means of a wing nut. creates to tight, resistant to action steam and high temperatures connection, which is at the same time easy for unscrewing and screwing without use tools. thread a nut wing has different (greater) size than thread external adapter GMB. use adapter allows creating various connections, depending on element used in installation. Material: steel galvanized. Working pressure: 18 bar (+210°C) - steam saturated. Operating temperature: up to +230°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn adapter for a ball end and a wing nut. W made of steel stainless, has special an insert polymer or copper on surface tapered cooperating with ball surface sealing fittings. It is tightened to the ball end by means of a wing nut. creates to tight, resistant to action steam and high temperatures connection, which is at the same time easy for unscrewing and screwing without use tools. thread a nut wing has different (greater) size than thread internal adapter GFB. Adapter GFB constitutes typical part complete fittings for steam with thread internal. use adapter allows creating various connections, depending on element used in installation. Material: steel stainless AISI 316. Working pressure: 18 bar (+210°C) - steam saturated. Operating temperature: up to +230°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn adapter for a ball end and a wing nut. has tapered surface, cooperating with ball surface sealing fittings. It is tightened to the ball end by means of a wing nut. creates to tight, resistant to action steam and high temperatures connection, which is at the same time easy for unscrewing and screwing without use tools. thread a nut wing has different (greater) size than thread internal adapter GFB. Adapter GFB constitutes typical part complete fittings for steam with thread internal. use adapter allows creating various connections, depending on element used in installation. Material: brass. Working pressure: 18 bar (+210°C) - steam saturated. Operating temperature: up to +230°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFittings with thread internal NPT for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps for steam type BOSS SBC. complete A fitting consists with three parts – fittings ball GB with spigot („tail”) for hose, a nut wing B of special thread internal (NPS) and special adapter GFB with thread external (NPS) such as in nut and thread internal compliant with size fittings. Adapter GFB has tapered an insert polymer or copper, cooperating with fitting ball. creates to tight, resistant to action steam and high temperatures connection, which is at the same time easy for unscrewing and screwing without use special tools, using a nut wing. Material: brass. Working pressure: 18 bar (+210°C) - steam saturated. Operating temperature: up to +230°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn adapter for a ball end and a wing nut. W made of steel zinc-plated, has special an insert polymer or copper on surface tapered cooperating with ball surface sealing fittings. It is tightened to the ball end by means of a wing nut. creates to tight, resistant to action steam and high temperatures connection, which is at the same time easy for unscrewing and screwing without use tools. Adapter GDB on both sides screwed with a nut wing can connect two hoses with fitting GF. Material: steel galvanized. Working pressure: 18 bar (+210°C) - steam saturated. Operating temperature: up to +230°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting FSS with a flange swivel, for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps shell for steam (EN 14423, DIN 2826, sizes 1/2” for 2”). Flange according to European standards (EN 10092-1) PN40 and PN16 and according to American ASA (ASME) standards 150 PSI and 300 PSI. Material: steel stainless AISI 316, steel galvanized. Working pressure: 18 bar (+210°C) for steam saturated and in accordance with pressure working given class flange in tej temperature; for other applications in accordance with pressure working for given class flange (e.g. PN40) - selection in contact with Tubes International.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting FSS with a flange fixed, for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps shell for steam (EN 14423, DIN 2826, sizes 1/2” for 2”). Flange according to European standards (EN 10092-1) PN40 and PN16 and according to American ASA (ASME) standards 150 PSI and 300 PSI. Material: steel stainless AISI 316. Working pressure: 18 bar (+210°C) for steam saturated and in accordance with pressure working given class flange in tej temperature; for other applications in accordance with pressure working for given class flange (e.g. PN40) - selection in contact with Tubes International.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting FSS with a flange swivel, for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps shell for steam (EN 14423, DIN 2826, sizes 1/2” for 2”). Flange according to European standards (EN 10092-1) PN40 and PN16 and according to American ASA (ASME) standards 150 PSI and 300 PSI. Material: steel galvanized. Working pressure: 18 bar (+210°C) for steam saturated and in accordance with pressure working given class flange in tej temperature; for other applications in accordance with pressure working for given class flange (e.g. PN40) - selection in contact with Tubes International.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFittings with thread internal BSP and NPT for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps for steam type BOSS SBC. complete A fitting consists with three parts – fittings ball GB with spigot („tail”) for hose, a nut wing B of special thread internal (NPS) and special adapter GFB with thread external (NPS) such as in nut and thread internal compliant with size fittings. Adapter GFB has tapered an insert polymer or copper, cooperating with fitting ball. creates to tight, resistant to action steam and high temperatures connection, which is at the same time easy for unscrewing and screwing without use special tools, using a nut wing. Due to reduced structurally lock (flange) fittings 2”, not should Use clamps for steam type BOSS SBC 2” with 4 claws. Material: steel stainless AISI 316. Working pressure: 18 bar (+210°C) - steam saturated. Operating temperature: up to +230°C.










































