0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -55 — 0

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 50 — 150

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Grease nipple (lubricator) series SKILLAIR®, without plates end, ensures correctness lubrication mist oil equipment in installations pneumatic. Size: 100, 200, 300. capacity bowl: 50 cm³ - size 100, 95 cm³ - size 200, 160 cm³ - size 300. Supply pressure: up to 15 bar (13 bar - size 200, 300). Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1". Flow rate: 1500 l/min - size 100, 3700 l/min - size 200, 5500 l/min - size 300 (at an inlet pressure of 6 bar and Δp = 1 bar). way filling oil: STD - version standard, filling through disassembly bowl or plug, CA - filling Automatic, replenishment only during use lubricator, CD - filling vacuum, drop pressure inside bowl allows its filling, CAML - filling Automatic with level minimum, CDML - filling vacuum with level minimum.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off alloy series STP-BX with thread internal and coupling push-in used mainly as valve safety. Po mounting on the connection supply actuator allows on Flow rate air only in the presence pneumatic signal control. actuator is stopped po a drop pressure control. Working pressure: 0.5 ÷ 10 bar. Operating temperature: od -10°C up to +60°C. Body material: brass nickel-plated. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off V3V electric, series SKILLAIR®, without plates end, serves for separation the system working od air supply. is to valve normally closed, three-way. W position closed cuts off air supply simultaneously venting configuration, co makes go especially useful during work service. Size: 100. Supply pressure: up to 10 bar. Operating temperature: up to +50°C. Flow rate: 1650 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off Controlled manually V3V series SYNTESI®, with end connections, serves for separation the system working od air supply. is to valve three-way, two-position, normally closed. W position closed cuts off air supply and vents configuration, co makes go especially useful at performing work service. has configuration allowing on mounting dwu in size SY1 or three in size SY2 padlocks o diameter 3 mm. alternatively Available is version with a hole Ø 7 for single padlock. On rear and front surface valve is found the connection auxiliary (1/8” for rate SY1 and 1/4” for size SY2) for connection pressure gauge, sensor pressure or for additional draw air. Size: SY1, SY2. Connection: 1/8" BSP female, 1/4", with the front and with the back. Supply pressure: up to 15 bar, depending on size. Operating temperature: od -10°C up to +50°C. Flow rate nominal: for 4000 l/min, depending on size (at an inlet pressure of 6 bar and Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off male V3V series G with thread internal BSP serves for separation air supply od parts working installation. Po closing air za valve is bled for atmosphere. especially recommended as protection at works maintenance. W set found angle bracket/A handle assembly, padlock and 2 keys. Do connecting individual element of each other, serve sets connecting GA (shape L, T, U). Size: 200, 300, 400. Connection: 1/8" BSP female ÷ 1/2". Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Control: hand.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Reducer compressed air MR FC, series BIT

          Air preparation elements (FRL) | All products
          0 €
          Regulator MR FC series BIT. A version with a controlled bleed, enabling increased accuracy in maintaining the set output pressure value through a continuous, slight air bleed to the atmosphere. Pressure gauge connection: 1/8" BSP female. Output pressure range: 0 ÷ 2 bar, 0 ÷ 4 bar or 0 ÷ 12 bar. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Grease nipple (lubricator) series SKILLAIR®, with plates end, ensures correctness lubrication mist oil equipment in installations pneumatic. Size: 100, 200, 300. capacity bowl: 50 cm³ - size 100, 95 cm³ - size 200, 160 cm³ - size 300. Supply pressure: up to 15 bar (13 bar - size 200, 300). Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1". Flow rate: 1500 l/min - size 100, 3700 l/min - size 200, 5500 l/min - size 300 (at an inlet pressure of 6 bar and Δp = 1 bar). way filling oil: STD - version standard, filling through disassembly bowl or plug, CA - filling Automatic, replenishment only during use lubricator, CD - filling vacuum, drop pressure inside bowl allows its filling, CAML - filling Automatic with level minimum, CDML - filling vacuum with level minimum.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve reducing pilot REG P, series SKILLAIR®, serves for maintaining pressure air everywhere tam, where required is high accuracy its setting, at variable conditions use. W a valve practically eliminated friction, thanks to which is characterized on mentioned earlier high accuracy and low hysteresis. presence slight bleed air is necessary for correct use valve and not is a sign its damage. typical for valves reducing large dimensions (series 400). recommended use air filtered. Size: 1/4". range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Connection: 1/4" BSP female. Pressure gauge connection: 1/8" BSP female. Flow rate: 140 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Filter FIL series SKILLAIR®, without plates end, serves for accurate removal contaminants liquid and solid, contained in compressed air. size retained contaminants depends od degree filtration the insert filter. Size: 100, 200, 300. Filtration grade: 5 µm, 20 µm, 50 µm. Supply pressure: up to 15 bar, depending on size and kinds trigger. Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 2000 l/min - size 100, 3100 l/min - size 200, 5300 l/min - size 300 (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Filter FIL series SKILLAIR®, with plates end, serves for accurate removal contaminants liquid and solid, contained in compressed air. size retained contaminants depends od degree filtration the insert filter. Size: 100, 200, 300. Filtration grade: 5 µm, 20 µm, 50 µm. Supply pressure: up to 15 bar, depending on size and kinds trigger. Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 2000 l/min - size 100, 3100 l/min - size 200, 5300 l/min - size 300 (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Reducer compressed air GR with thread internal BSP, series G

          Air preparation elements (FRL) | All products
          0 €
          Reducer GR series G with thread internal BSP, set manually, stays constant value pressure at the outlet, independently od fluctuations pressure against valve. W set found A handle assembly and pressure gauge. Do connecting individual element of each other, serve sets connecting GA (shape L, T, U). Size: 200, 300, 400, 600. Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Connection: 1/8" BSP female ÷ 1". Flow rate: 3000 l/min - size 200, 4000 l/min - size 300, 7500 l/min - 400, 12000 l/min - 600 (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Filter compressed air GF series G with thread internal BSP

          Air preparation elements (FRL) | All products
          0 €
          Filter GF series G with thread internal BSP serves for removing contaminants contained in compressed air in order to correct use element systems pneumatic. W set found A handle assembly. Do connecting individual element of each other, serve sets connecting GA (shape L, T, U). Size: 200, 300, 400, 600. Filtration grade: 40 µm. Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Connection: 1/8" BSP female ÷ 1". Condensate drain: automatic (A). Flow rate: 3100 l/min - size 200, 5000 l/min - size 300, 7500 l/min - size 400, 12000 l/min - size 600 (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Grease nipple GL series G with thread internal BSP ensures correctness lubrication mist oil equipment in installations pneumatic. W set found angle bracket/A handle assembly. Do connecting individual element of each other, serve sets connecting GA (shape L, T, U). Size: 200, 300, 400, 600. Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Connection: 1/8" BSP female ÷ 1". Flow rate: 3200 l/min - size 200, 5400 l/min - size 300, 8300 l/min - size 400, 12000 l/min - size 600 (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Automatic trigger SAC

          Accessories for FRL | All products
          0 €
          Automatic trigger condensate (SAC, RA) intended for systems BIT, NEW DEAL, SKILLAR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A cross type C11 intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Filter - reducer GFR series G with thread internal BSP serves for removing contaminants contained in compressed air in order to correct use element systems pneumatic, a reducer set manually stays constant value pressure at the outlet, independently od fluctuations pressure against valve. W set found angle bracket/A handle assembly and pressure gauge. Do connecting individual element of each other, serve sets connecting GA (shape L, T, U). Size: 200, 300, 400, 600. Filtration grade: 40 µm. Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Connection: 1/8" BSP female ÷ 1". Condensate drain: automatic (A). Flow rate: 2100 l/min - size 200, 3800 l/min - size 300, 6750 l/min - size 400, 11100 l/min - size 600 (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Filter D series SKILLAIR®, with plates end, serves for removal with high accuracy contaminants liquid and solid, contained in compressed air. Size: 100, 200, 300. Filtration grade: 99.97% at 0.01 µm. Supply pressure: up to 15 bar, depending on size and kinds trigger. Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 230 l/min - size 100, 360 l/min - size 200, 500 l/min - size 300 (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Filter accurate compressed air D, series NEW DEAL

          Air preparation elements (FRL) | All products
          0 €
          Filter accurate D series NEW DEAL with an insert coalescing removing vapours oil. Filtration grade: 99.97% at 0.01 µm. Supply pressure: up to 18 bar. Operating temperature: up to +50°C. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 230 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Filter accurate compressed air DEP, series BIT

          Air preparation elements (FRL) | All products
          0 €
          Filter accurate DEP series BIT with an insert coalescing for systems compressed air or in immediate vicinity equipment actuating. Size: 1/8", 1/4". maximum pressure input: up to 13 bar. Operating temperature: up to +50°C. Condensate drain: manual / semi-automatic (RMSA). recommended Flow rate: 200 Nl/min (at an inlet pressure of 6 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Filter accurate compressed air DEP, series SYNTESI®

          Air preparation elements (FRL) | All products
          0 €
          Filter accurate DEP series SYNTESI®, with end connections, serves for removal with high accuracy contaminants liquid or solid, contained in compressed air. high accuracy filtration obtained is through use special element filtering called „an insert coalescing”. Size: SY1, SY2. Filtration grade: 0.01 µm - Class purity air acc. to ISO 8573-1: 1-7-2. Supply pressure: up to 15 bar - size SY1, up to 13 bar - size SY2. Operating temperature: od -10°C up to +50°C. Condensate drain: manual / semi-automatic (RMSA). Flow rate recommended: 460 l/min - size SY1, 620 l/min - size SY2 (at pressure 6.3 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Angle bracket fixing SQU L

          All products | Functional fittings
          0 €
          Angle bracket intended for mounting for plates products with series Line On Line. supplied with two screws M3x16 (for LOL 4), two screws M3x25 (for LOL 6 and 8), two nut M3 and four washers. Material: steel galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Padlock for valve for compressed air, series SYNTESI®

          Air preparation elements (FRL) | All products
          0 €
          Padlock protecting against unauthorised change setting valve reducing or switching on valve shut-off - for series Syntesi®.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Wrench for removal bowl BIT/SY1

          Accessories for FRL | All products
          0 €
          Wrench for removal bowl BIT/SY1, system SYNTESI. Material: steel.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Elbow 90° of steel stainless type 62510 with thread internal BSP. Material: steel AISI 316L. Operating temperature: od -20°C up to +225°C. Working pressure: 140 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Elbow through-flow, HP type 40130

          All products | Push-in fittings
          0 €
          Elbow through-flow for connecting hoses with plastics (for hoses polyurethane required minimum Hardness per Shore (A): 98°). Material: brass nickel-plated. Operating temperature: od -15°C up to +130°C. Working pressure: 30 bar. sealing: Viton.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flange fixing actuator pneumatic, for mounting for cover rear or front actuator. allows on fixed mounting actuator in machines and equipment. range diameters actuators: 32 mm ÷ 125 mm. W set: 4 screws mounting. Material: galvanised carbon steel (flange, screws and washer).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Flange fixing for actuator, model C, oval

          All products | Pneumatic actuators
          0 €
          Flange fixing actuator pneumatic, for mounting for cover rear or front actuator. allows on fixed mounting actuator in machines and equipment. size actuator: Ø8 ÷ Ø25. Material: galvanised carbon steel.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Complete Tee plug-in BANJO, type R55

          All products | Push-in fittings
          0 €
          Complete Tee plug-in BANJO, type R55, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting terminated thread external BSPT with serrated "tail" for hose, type 62340. Material: steel AISI 316L. Operating temperature: od -20°C up to +225°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug with socket hexagonal under wrench Allen of steel stainless type 62315 with thread external BSP or metric, O-ring. Material: steel AISI 316L. Operating temperature: od -20°C up to +225°C. Working pressure: 140 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Body Tee coupling BANJO of couplings socket type D6, intended for hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. body Tee coupling BANJO allows setting coupling in desired position. screws through-flow for body: D7, D8, D9, D10. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Body tee BANJO, type R14

          All products | Push-in fittings
          0 €
          Body tee BANJO, type R14, for bolts series D, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Body tee BANJO, type R29

          All products | Push-in fittings
          0 €
          Body tee BANJO, type R29, for bolts series D, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Connector “U”

          All products | Functional fittings
          0 €
          Connector "U" intended for connecting products Line On Line. Do fittings 6 mm and 8 mm. Material: polyamide.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A mounting foot model AC for actuator cylindrical - sera RNDC. packed individually. size actuator: Ø32, Ø40, Ø50. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bar directional with 2 opposite outlets, aluminum

          Accessories for pneumatic fittings | All products
          0 €
          Bar directional with two opposite outlets for use in systems pneumatic, allowing on separation compressed air under pressure, on several other branches. has additional holes enabling attachment jej in desired space installation. Working pressure: 12 bar. Operating temperature: od -10°C up to +80°C. Material: aluminum anodized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Mini actuator series TP made in accordance with the standard ISO 6432 have cover made with plastic o high strength, whereas ferrules are made with aluminum anodized. available versions: with magnet or without magnet. Piston diameter: Ø 16, 20 and 25 mm. stroke working: od 1 for 80 mm (with the possibility order for 500 mm). Working pressure: od 0.6 up to 10 bar. sealing: polyurethane. Operating temperature: od -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Mini actuator double-acting operation ISO 6432 STD, type 109 with cushioning, without magnet. has been designed for use with filtered air oiled or not oiled and not requires additional operations maintenance. Do make actuator used sleeve of steel stainless. reduced dimensions external covers some diameters, co allows assembly actuators in difficult and confined spaces. service life actuators with seals NBR is 15 million cycles, with polyurethane 30 million cycles. The presented value not should be treated as binding or guaranteed, a only as reference Due to variability many agents, including loads radial and axial, speed, temperature, czy losses air (value limit). Piston diameter: Ø 16, 20 and 25 mm. stroke working: od 10 for 320 mm. Working pressure: od 0.6 up to 10 bar. sealing: polyurethane, NBR, FKM/FPM. Operating temperature: od -10°C up to +150°C depending on used seal.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Miniature valve reducing type RML (Connection threaded with an O-ring on inlet and coupling push-in at the outlet) intended for reduction higher pressure for lower pressure za valve. range pressure output: 1 ÷ 8 bar. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Miniature valve reducing type RML (coupling push-in on inlet and Connection threaded with an O-ring at the outlet) intended for reduction higher pressure for lower pressure za valve. range pressure output: 1 ÷ 8 bar. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        Go to Top