- Home
- Pneumatics
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElement logic AND-and. Control through compressed air, zeroing through compressed air. assembly in any position. Material: body - plastic plastic, stem - aluminum, sealing - NBR. Flow rate nominal: 100 Nl/min for 6 bar at a drop pressure 1 bar. built-in coupling push-in under line 4 mm. Operating temperature: od -10°C up to +60°C. Working pressure: 0 up to 8 bar. pressure control: 1.5 up to 8 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter FIL series BIT recommended for decentralised compressed-air systems or in the immediate vicinity of actuating devices. Size: 1/8", 1/4". Filtration grade: 5 µm, 20 µm, 50 µm. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 1200 l/min - 1/8", 1/4" (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDirectional valve plug-in side with thread external, type R45, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off 3/2 used as valve switching and venting installations pneumatic. when sleeve control shifted is for the back, then configuration pneumatic is vented, a when sleeve is shifted for the front, to configuration pneumatic is pressurized. Working pressure: 10 bar. Operating temperature: od -10°C up to +80°C. Body material: brass chrome-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off Controlled manually V3V series SYNTESI®, without end connections, serves for separation the system working od air supply. is to valve three-way, two-position, normally closed. W position closed cuts off air supply and vents configuration, co makes go especially useful at performing work service. has configuration allowing on mounting dwu in size SY1 or three in size SY2 padlocks o diameter 3 mm. alternatively Available is version with a hole Ø 7 for single padlock. On rear and front surface valve is found the connection auxiliary (1/8” for rate SY1 and 1/4” for size SY2) for connection pressure gauge, sensor pressure or for additional draw air. Size: SY1, SY2. Connection: 1/8" BSP female, 1/4", with the front and with the back. Supply pressure: up to 15 bar, depending on size. Operating temperature: od -10°C up to +50°C. Flow rate nominal: for 4000 l/min, depending on size (at an inlet pressure of 6 bar and Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control mechanical, a lever front with a roller, used most often for control operation actuators. can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in angled 90° with thread external tapered, type R39C, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRelay pneumo-electric 2A NO/NC 2 MT (version with two-metre line). Supply pressure: up to 15 bar. Operating temperature: up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off alloy series STP-U with valve check with coupling push-in used mainly as valve safety. Po mounting on connections supply actuator allows on Flow rate air only in the presence pneumatic signal control. actuator is stopped po a drop pressure control. Working pressure: 0.5 ÷ 10 bar. Operating temperature: od -10°C up to +60°C. Body material: brass nickel-plated. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA complete coupling push-in double BANJO, type R56, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini reducer SDR series G with thread internal BSP, set manually, stays constant value pressure at the outlet, independently od fluctuations pressure against valve. W set found A handle assembly and pressure gauge. Size: 100, 200. Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Connection: M5 BSP female ÷ 1/4". Flow rate: 150 l/min - size 100, 500 l/min - size 200 (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElement logic OR-or. Control through compressed air, zeroing through compressed air. assembly in any position. Material: body - plastic plastic, stem - aluminum, sealing - NBR. Flow rate nominal: 100 Nl/min for 6 bar at a drop pressure 1 bar. built-in coupling push-in under line 4 mm. Operating temperature: od -10°C up to +60°C. Working pressure: 0 up to 8 bar. pressure control: 1.5 up to 8 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection with spigot extended with thread external, type R18, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease nipple GAL series GA with thread internal BSP ensures correctness lubrication mist oil equipment in installations pneumatic. W set found angle bracket/A handle assembly. Do connecting individual element of each other, serve sets connecting GA (shape L, T, U). Size: 200, 300, 400, 600. Supply pressure: up to 10 bar. Operating temperature: od -5°C up to +70°C. Connection: 1/8" BSP female ÷ 1". Flow rate: 2750 l/min - size 200, 5000 l/min - size 300, 8800 l/min - size 400, 14500 l/min - size 600 (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter FIL series SYNTESI® without end connections, serves for removing contaminants solid and liquid with generated through compressor air. Size: SY1, SY2. Filtration grade: 5 µm, 20 µm, 50 µm. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: up to +50°C. Connection: 1/8" BSP female ÷ 3/8" for SY1 and 3/8" BSP female ÷ 1" for SY2. Additional connection for a pressure gauge or fittings: 1/8" BSP female for SY1 and 1/4" for SY2. Condensate drain: manual / semi-automatic (RMSA), automatic float (RA). Flow rate: 1300 l/min - 1/8", 1650 l/min - 1/4", 1750 l/min - 3/8" (SY1), 4500 l/min - 3/8" (SY2), 5200 l/min - 1/2", 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control mechanical, a lever with a roller, used most often for control operation actuators. can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in "L" with spigot, type R48, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBody elbow BANJO, type R13, for bolts series D, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRegulator MR SR, series BIT. version used, when po a drop pressure supply required is fast venting the system pneumatic. reducer SR should mount between valve switching on a space use. Pressure gauge connection: 1/8" BSP female. Output pressure range: 0 ÷ 2 bar, 0 ÷ 4 bar, 0 ÷ 8 bar or 0 ÷ 12 bar. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control mechanical, a rod resilient of assist, used most often for control operation actuators. can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElement logic NOT-negation. Control through compressed air, zeroing through spring mechanical. assembly in any position. Material: body - plastic plastic, stem - aluminum, sealing - NBR. Flow rate nominal: 100 Nl/min for 6 bar at a drop pressure 1 bar. built-in coupling push-in under line 4 mm. Operating temperature: od -10°C up to +60°C. Working pressure: 0 up to 8 bar. pressure control: 1.5 up to 8 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve reducing REG, series SKILLAIR®, without plates end, serves for regulation pressure working, ensuring correct operation devices. Size: 100, 200, 300. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar (13 bar - series 300). Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1". Pressure gauge connection: 1/8" BSP female. Flow rate: 1600 l/min - size 100, 3500 l/min - size 200, 7000 l/min - size 300 (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in "T" adjustable, long with thread external, type R37, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap Intended for flexible hoses pneumatic in sizes inch, series S, type PPFC. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve higher signal series VOR intended for separation signal o higher value, from among two signals input. signals input not interact on each other each other. Working pressure: 2 ÷ 10 bar. Operating temperature: od -10°C up to +80°C. Material body: aluminum. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet FR + L series BIT with diaphragm shaped. is characterized high value flow at reduced a drop pressure, high degree separation condensate, the possibility use at low values flow. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease nipple (lubricator) series SYNTESI®, without end connections, ensures correctness lubrication mist oil equipment in installations pneumatic. version standard (STD), filling oil through plug replenishment oil. Size: SY1, SY2. capacity bowl: 60 cm³ - SY1, 130 cm³ - SY2. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: od -10°C up to +50°C. Connection: 1/8" BSP female ÷ 3/8" for SY1 and 3/8" BSP female ÷ 1" for SY2. Flow rate: 1600 l/min - 1/8", 3000 l/min - 1/4", 3650 l/min - 3/8", 6100 l/min - 1/2", 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight valve foot with cover protective and sockets in plane face, serves for control foot through the operator devices in systems pneumatics. Connection: M5, Ø4. Working pressure: from 2.5 bar to 10 bar. Operating temperature: -10°C up to +60°C. Flow rate nominal: 95 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElement logic MEMORY-memory. Control through compressed air, zeroing through compressed air. assembly in any position. Material: body - plastic plastic, stem - aluminum, sealing - NBR. Flow rate nominal: 100 Nl/min for 6 bar at a drop pressure 1 bar. built-in coupling push-in under line 4 mm. Operating temperature: od -10°C up to +60°C. Working pressure: 0 up to 8 bar. pressure control: 1.5 up to 8 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve reducing REG, series SKILLAIR®, with plates end, serves for regulation pressure working, ensuring correct operation devices. Size: 100, 200, 300. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar (13 bar - size 300). Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1". Pressure gauge connection: 1/8" BSP female. Flow rate: 1600 l/min - size 100, 3500 l/min - size 200, 7000 l/min - size 300 (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control mechanical, a lever with a roller, used most often for control operation actuators. can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet VFR + L series NEW DEAL o high degree reliability with valve reducing type piston, consists with valve shut-off, filter air, valve reducing and lubricator. intended is for use in heavy conditions, guaranteeing at this stability pressure set at variable pressure supply and operation at low values flow. valve V3V allows quickly aerate and vent configuration. Connection: 1/4" BSP female, 3/8", 1/2", 3/4", 1". Supply pressure: up to 18 bar, for trigger RA up to 10 bar. range pressure output: 0÷8, 0÷12 bar. Filtration grade: 4 µm, 20 µm, 50 µm. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Connection pressure-gauge: 1/8" BSP female. Operating temperature: up to +50°C. Flow rate nominal: 480 l/min - 1/4", 1900 l/min - 3/8", 1/2" (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter GAF series GA with thread internal BSP serves for removing contaminants contained in compressed air in order to correct use element systems pneumatic. W set found A handle assembly. Do connecting individual element of each other, serve sets connecting GA (shape L, T, U). Size: 200, 300, 400, 600. Filtration grade: 40 µm. Supply pressure: up to 10 bar. Operating temperature: od -5°C up to +70°C. Connection: 1/8" BSP female ÷ 1". Condensate drain: automatic (A). Flow rate: 1700 l/min - size 200, 3000 l/min - size 300, 4500 l/min - size 400, 10500 l/min - size 600 (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve with connection NAMUR adjustable pneumatic, serves for control drives pneumatic. Ich Connection allows on mounting valves directly on body actuators. Function 5/2 - five-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - Hostaform®. minimal pressure supply pilots: 2.5 bar. Operating temperature: -10°C up to +60°C. Flow rate nominal: 1100 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with reducer (filter-regulator) FR, series SKILLAIR®, is a device consisting of a filter and a reducing valve. It reduces and purifies the air supplied by the compressor. Size: 100, 200. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar, depending on size. Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1/2". Pressure gauge connection: 1/8" BSP female. Condensate drain: manual / semi-automatic (RMSA), automatic (RA, SAC). Flow rate: for 3000 l/min at an inlet pressure of 6 bar Δp = 1 bar), depending on size.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElement logic YES-confirmation. Control through compressed air, zeroing through spring mechanical. assembly in any position. Material: body - plastic plastic, stem - aluminum, sealing - NBR. Flow rate nominal: 100 Nl/min for 6 bar at a drop pressure 1 bar. built-in coupling push-in under line 4 mm. Operating temperature: od -10°C up to +60°C. Working pressure: 0 up to 8 bar. pressure control: 1.5 up to 8 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter D series SKILLAIR®, without plates end, serves for removal with high accuracy contaminants liquid and solid, contained in compressed air. Size: 100, 200, 300. Filtration grade: 99.97% at 0.01 µm. Supply pressure: up to 15 bar, depending on size and kinds trigger. Operating temperature: up to +50°C. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 230 l/min - size 100, 360 l/min - size 200, 500 l/min - size 300 (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle type MRF NTB series COMPACT "N" used for simultaneous regulation flow in both directions - during filling and venting, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting using a knob adjustment and/or a screwdriver; possibility securing setting a lock nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +50°C. Material: plastic plastic.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with carbon active AC series SYNTESI®, without end connections, serves for cleaning compressed air with residue oil, solvents and odors. purification occurs due to flow air through porous granulate carbon active o high absorption contaminants. is to most effective method purification air used in industrial installations pneumatic. efficiency and service life the insert filtration can increase preceding go filter accurate (0.01µm) and filter preliminary (5µm). Size: SY1, SY2. residue oil at 20°C: 0.003 mg/m 3 – Class purity air acc. to ISO 8573-1: 1-7-1 (at difference pressure not exceeding 75 mbar). service life the insert: 4000 hours (at difference pressure not exceeding 75 mbar). Supply pressure: up to 15 bar - size SY1, up to 13 bar - size SY2. Operating temperature: od -10°C up to +50°C. Condensate drain: manual / semi-automatic (RMSA). Flow rate recommended: 350 l/min - size SY1, 800 l/min - size SY2 (at pressure 6.3 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type MRF OMV series COMPACT "O" for mounting in connections valves directional, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting at use a screwdriver, with the possibility mounting cover protective. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Material: brass nickel-plated.



















































