- Home
- Pneumatics
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee plug-in "Y", adjustable with thread external, type R23/M, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA handle serves for mounting sensor proximity on actuator cylindrical. brackets sensors DXF: o index codes W09500001... - intended for actuators with sleeve aluminum, o index codes W09500005... - intended for actuators with sleeve of steel stainless. Material: steel stainless, plastic plastic.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control manual, a lever 90°, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/2 - five-way, two-position or 5/3 - five-way, three-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet repair intended for valve fast trigger series VSR. set contains a gasket flat with rubber NBR and gasket lip with polyurethane. available in three sizes: 1/8", 1/4" and 1/2".
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee plug-in "T", adjustable with thread external, type R35, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA bracket CETOP for mounting with a flange swivel. W set: 4 screws with washers. Material: aluminum cast (flange), steel carbon galvanized (screws and washer).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA connector 15 mm shape C, DIN 43650, for valve MACH 16 MSV, Control electrical. Material: plastic plastic.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control pneumatic, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 3/2 - three-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA throttle trigger MWDSN with thread external and with thread internal used in systems compressed air in order to reducing level noise. Material: brass nickel-plated. Operating temperature: od -10°C up to +80°C. Working pressure: 12 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange swivel with single eye for mounting on rear parts cover actuator, without pin. allows performing movement actuator pneumatic during its use. W set: 4 screws. Material: aluminum cast (flange), steel+bronze+PTFE (sleeve), steel carbon galvanized (screws and washer).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA mini valve poppet, directional o control mechanical, used most often for control operation actuators. can be mounted in any position. Do actuation valve needed is low force. Function 3/2 NO and NC - three ways flow, two position. Connection: M5 female, coupling push-in Ø4 and Ø6 (axially or on the side). Control: pusher, pusher for mounting panel, lever with a roller, lever with a roller single-acting operation. Material: body valve - aluminum, pusher - brass nickel-plated, sealing - NBR, spring - steel stainless. Flow rate nominal: 60 l/min (at an inlet pressure of 6 bar Δp = 1 bar). force actuation (pusher at 6 bar): 8 N. Working pressure: od 0.5 up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection with spigot and with thread external, type R6, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA mounting foot (angle bracket) Intended for actuator ISO 15552 series STD, series 3, "two flat", o diameter od 32 mm for 125 mm, model A. W set: 2 screws. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug reducing on one side terminated tube (spigot), on the other side terminated coupling push-in, series S, type PGJM. economical solution for connecting flexible hoses pneumatic o metric calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type MRF NTC series COMPACT "N" for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting using a knob adjustment and/or a screwdriver; possibility securing setting a lock nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +50°C. Material: plastic plastic.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange swivel with joint ball for mounting on rear parts cover actuator. W set: 4 screws with washers. Material: aluminum cast (flange), steel (joint), steel carbon galvanized (screws and washer).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap for coupling push-in series R, type R9. Material: plastic plastic. Working pressure: 12 bar. Operating temperature: od -20°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control electric (solenoid valve), without a coil control, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/3 - five-way, three-position. size the directional valve: 1/8", 1/4", 3/8", 1/2". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet seals replaceable for actuator ISO 15552 Ø 160 - 200. Material: NBR. Diameter: Ø 160, Ø 200.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off alloy series STP-U with valve check with thread internal used mainly as valve safety. Po mounting on connections supply actuator allows on Flow rate air only in the presence pneumatic signal control. actuator is stopped po a drop pressure control. Working pressure: 0.5 ÷ 10 bar. Operating temperature: od -10°C up to +60°C. Body material: brass nickel-plated. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in angled 90° adjustable with thread internal, type R34/F, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet seals replaceable for actuator compact ISO 21287, series LINER. Material: polyurethane. Diameter: 80, 100.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling Tee "Y" reducing of couplings push-in under hose o diameter metric, series S, type PYM. economical solution for connecting flexible hoses pneumatic o metric calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control manual, a lever 90°, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 3/2 - three-way, two-position. Size: 1/8", 1/4" or 1/2". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBar directional multi-outlet with outlets 1/4" for use in systems pneumatic, allowing on separation compressed air under pressure, on several other branches. has additional holes enabling attachment jej in desired space installation. Working pressure: 12 bar. Operating temperature: od -10°C up to +80°C. Material: aluminum anodized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA handle assembly sensor proximity for actuators ISO 15552, in version with sleeve cylindrical. Material: aluminum. Diameter: 160 ÷ 200.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type MRF OMC series COMPACT "O" for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting at use a screwdriver, with the possibility mounting cover protective. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Material: brass nickel-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in straight with thread external tapered, type R1C, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet seals replaceable for actuator compact ISO 21287, series LINER. Material: polyurethane. Diameter: 32 ÷ 63.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve with connection NAMUR adjustable electrically, serves for control drives pneumatic. Ich Connection allows on mounting valves directly on body actuators. Function 5/2 - five-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - Hostaform®. Working pressure: 2.5 ÷ 10 bar. Operating temperature: -10°C up to +60°C. Flow rate nominal: 1100 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSwivel coupling with three independent ways on inlet threads internal BSP, at the outlet threads internal BSP. Working pressure: 12 bar. Operating temperature: od -10°C up to +80°C. Material: brass nickel-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting push-in straight with thread external NPT, series S, type PCC. economical solution for connecting flexible hoses pneumatic o inch calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBar directional with with fittings Ø 4-6-8 mm for use in systems pneumatic, allowing on separation compressed air under pressure, on several other branches. has additional holes enabling attachment jej in desired space installation. Working pressure: 12 bar. Operating temperature: od -10°C up to +80°C. Material: aluminum anodized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet seals replaceable for actuator compact ISO 21287, series LINER. Material: polyurethane. Diameter: 20, 25.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve check series VNR enabling Flow rate air only in one direction. Working pressure: 2 ÷ 10 bar. Operating temperature: od -10°C up to +70°C. Body material: brass OT58. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting angled 90° with thread external NPT, series S, type PLC. economical solution for connecting flexible hoses pneumatic o inch calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA nut for use on piston rod, to lock e.g. heads fork/articulated (for diameters 32 ÷ 125 mm).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control electric (solenoid valve), without a coil control, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/2 - five-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSwivel coupling with two independent ways on inlet threads internal BSP, at the outlet threads internal BSP. Working pressure: 12 bar. Operating temperature: od -10°C up to +80°C. Material: brass nickel-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in angled rotational with thread external tapered, type R 31C, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.



















































