0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -55 — 0

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 50 — 150

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Adapter assembly sensor proximity for brackets DST/ST, used in actuator series R1 and ISO 15552. Material: plastic plastic.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check type MRF NMV series COMPACT "N" for mounting in connections valves directional, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting using a knob adjustment and/or a screwdriver; possibility securing setting a lock nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Material: brass nickel-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Swivel coupling single, brass

          Accessories for pneumatic fittings | All products
          0 €
          Single Swivel coupling on one side terminated thread external with the other thread internal. Working pressure: 12 bar. Operating temperature: od -10°C up to +80°C. Material: brass nickel-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-in angled 90° with spigot, type R46, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A cross plug-in, type R40

          All products | Push-in fittings
          0 €
          A cross plug-in, type R40, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A mounting foot model A for mini actuator ISO 6432. size actuator: Ø8, Ø10, Ø12, Ø16, Ø20, Ø25. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bar directional multi-outlet with outlets 1/8”, aluminum

          Accessories for pneumatic fittings | All products
          0 €
          Bar directional multi-outlet with outlets 1/8" for use in systems pneumatic, allowing on separation compressed air under pressure, on several other branches. has additional holes enabling attachment jej in desired space installation. inlet - threads internal 1/4" BSP, outlet threads internal 1/8" BSP. Working pressure: 12 bar. Operating temperature: od -10°C up to +80°C. Material: aluminum anodized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Reducer compressed air MR, series BIT

          Air preparation elements (FRL) | All products
          0 €
          Regulator MR series BIT. A basic version for regulating compressed-air pressure in a pneumatic installation. Pressure gauge connection: 1/8" BSP female. Output pressure range: 0 ÷ 2 bar, 0 ÷ 4 bar, 0 ÷ 8 bar or 0 ÷ 12 bar. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check type MRF OTC series COMPACT "O" for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting at use a screwdriver, with the possibility mounting cover protective. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +50°C. Material: plastic plastic.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Cube directional 4 – road, aluminum

          Accessories for pneumatic fittings | All products
          0 €
          Bar directional 4-output (4x thread internal BSP) for use in systems pneumatic, allowing on separation compressed air under pressure, on several other branches. has additional holes enabling attachment jej in desired space installation. Working pressure: 12 bar. Operating temperature: od -10°C up to +80°C. Material: aluminum anodized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve reducing high-pressure type piston with pressure gauge, serves for regulation pressure working and ensures correct operation in connected za nim installation, independently od changing wear medium. Size: DN20. Material housing: brass. Output pressure range: 0.5÷12, 1÷20, 2÷35, 3÷50 bar. Supply pressure: up to 60 bar. Operating temperature: od -10°C up to +90°C. Connection: 1" BSP female. Diameter disc pressure gauge: Ø63. Flow rate: 5000 l/min (at an inlet pressure of 20 bar Δp = 4 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control manual, a lever front, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/2 - five-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-in angled 90° long with thread external, type R36, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bar directional with opposite outlets 1/8” – 1/4”, aluminum

          Accessories for pneumatic fittings | All products
          0 €
          Bar directional with opposite outlets 1/8" - 1/4" for use in systems pneumatic, allowing on separation compressed air under pressure, on several other branches. has additional holes enabling attachment jej in desired space installation. Working pressure: 12 bar. Operating temperature: od -10°C up to +80°C. Material: aluminum anodized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tee plug-in "T" adjustable with thread external, type R16, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle type MRF NMB series COMPACT "N" used for simultaneous regulation flow in both directions - during filling and venting, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting using a knob adjustment and/or a screwdriver; possibility securing setting a lock nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Material: brass nickel-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve reducing for compressed air REG, series NEW DEAL

          Air preparation elements (FRL) | All products
          0 €
          Valve reducing REG type piston, is characterized resistance on heavy conditions use, intended for series NEW DEAL. Possibility of wall mounting via holes in the body. Size: 1/4", 3/8", 1/2", 3/4", 1". Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 18 bar. Operating temperature: up to +50°C. Connection: 1/4" BSP female, 3/8", 1/2", 3/4", 1". Pressure gauge connection: 1/8" BSP female for valve for 1/2" (above - 1/4" BSP female). Flow rate: 650 l/min - 1/4", 2500 l/min - 3/8", 1/2", 4500 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Filter with reducer series NEW DEAL type piston o high degree reliability, intended for compressed-air systems or in the immediate vicinity of actuating devices. Possibility of wall mounting via holes in the body. Size: 1/4", 3/8", 1/2". Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 18 bar, for trigger RA up to 10 bar. Operating temperature: up to +50°C. Connection: 1/4" BSP female, 3/8", 1/2". Pressure gauge connection: 1/8" BSP female. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 700 l/min - 1/4", 2500 l/min - 3/8", 1/2" (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bar directional 2 – output, aluminum

          Accessories for pneumatic fittings | All products
          0 €
          Bar directional 2-output for use in systems pneumatic, allowing on separation compressed air under pressure, on several other branches. has additional holes enabling attachment jej in desired space installation. inlet - threads internal BSP, outlet - threads internal BSP. Working pressure: 12 bar. Operating temperature: od -10°C up to +80°C. Material: aluminum anodized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tee plug-in "L" adjustable with thread external tapered, type R38, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check series RFL type U, regulating value flow air only in one direction. serves for regulation speed working equipment actuating in systems pneumatic. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: up to +70°C. Material body: aluminum. Material housing: brass.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Filter with reducer (filter-regulator) series SYNTESI®, without end connections, is a device consisting of a filter and a reducing valve. built is with these same components co Filter and reducer, so has such same features technical. It reduces and purifies the air supplied by the compressor. Size: SY1, SY2. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: up to +50°C. Connection: 1/8" BSP female ÷ 3/8" for SY1 and 3/8" BSP female ÷ 1" for SY2. Additional connection for a pressure gauge or fittings: 1/8" BSP female for SY1 and 1/4" for SY2. Condensate drain: manual / semi-automatic (RMSA), automatic (RA). Flow rate: 1300 l/min - 1/8", 2000 l/min - 1/4", 3000 l/min - 3/8" (SY1), 5800 l/min - 3/8" (SY2), 7200 l/min - 1/2", 7400 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control pneumatic, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/2 - five-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-in straight of couplings push-in for hose o diameter inch, series S, type PUCC. economical solution for connecting flexible hoses pneumatic o inch calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Filter with reducer series BIT with diaphragm shaped, recommended for decentralised compressed-air systems or in the immediate vicinity of actuating devices. Size: 1/8", 1/4". Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Filtration grade: 5 µm, 20 µm, 50 µm. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Connection: 1/8" BSP female, 1/4" BSP female. Pressure gauge connection: 1/8" BSP female. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 600 l/min - 1/8", 1/4" (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control manual, a plunger of assist, for control panel. used most often for control operation actuators. during mounting required is always Adapter MW-035100005. Function 5/2 - five-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-in angled 90° adjustable with thread external, type R20, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Connector fitting push-in, type R7

          All products | Push-in fittings
          0 €
          Connector fitting push-in, type R7. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve alloy series STP-B with thread internal is valve controlled pneumatic. allows on Flow rate air through valve po simultaneous applying pneumatic signal control (the pilot). W case loss signal control valve is closed in both directions flow. valve STP-B mounted in the connection supply actuator causes, at the absence pressure on the connection control (the pilot), stopping movement actuator. use valves STP-B as valves safety should be preceded appropriate analysis risk the system pneumatic or the entire devices. Working pressure: 0.5÷10 bar. Operating temperature: od -10°C up to +60°C. Body material: brass nickel-plated. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Assembly preparation compressed air FR+L, series NEW DEAL

          Air preparation elements (FRL) | All products
          0 €
          Set FR + L series NEW DEAL o high degree reliability for heavy conditions use, with reducer type piston. is characterized stability pressure set at variable pressure supply, micrometric regulation doses lubrication proportional for flow air, guaranteed work at low values flow. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 18 bar, for trigger RA up to 10 bar. Operating temperature: up to +50°C. Connection: 1/4" BSP female, 3/8", 1/2". Connection pressure-gauge: 1/8" BSP female. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 500 l/min - 1/4", 2200 l/min - 3/8", 1/2" (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Filter - reducer GAFR series GA with thread internal BSP serves for removing contaminants contained in compressed air in order to correct use element systems pneumatic, a set manually reducer stays constant value pressure at the outlet, independently od fluctuations pressure supply. W set found angle bracket/A handle assembly and pressure gauge. Do connecting individual element of each other, serve sets connecting GA (shape L, T, U). Size: 200, 300, 400, 600. Filtration grade: 40 µm. Supply pressure: up to 10 bar. Operating temperature: od -5°C up to +70°C. Connection: 1/8" BSP female ÷ 1". Condensate drain: automatic (A). Flow rate: 1050 l/min - size 200, 2250 l/min - size 300, 4000 l/min - size 400, 6500 l/min - size 600 (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Directional valve plug-in side, type R44, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve pneumatic fast trigger brass VSR

          All products | Pneumatic valves
          0 €
          Valve fast trigger serves for increasing speed actuator through fast discharge air. Body material: brass nickel-plated. Material cover: brass nickel-plated (1/8" ÷ 1/4"), aluminum anodized (1/2"). gasket flat: NBR. gasket lip: polyurethane. maximum pressure: 12 bar. minimal pressure: 0.5 bar. Operating temperature: od 0°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Filter FIL series SKILLAIR®, without plates end, serves for accurate removal contaminants liquid and solid, contained in compressed air. Size: 400. Filtration grade: 5 µm, 20 µm, 50 µm. Supply pressure: up to 13 bar, depending on kinds trigger. Operating temperature: up to +50°C. Connection: 1" BSP female ÷ 2". Condensate drain: manual / semi-automatic (RMSA), automatic (RA).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-in Tee "T" of couplings push-in for hose o diameter inch, series S, type PUTC. economical solution for connecting flexible hoses pneumatic o inch calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control manual, a lever front, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/3 - five-way, three-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Filter with reducer (filter-regulator) series SYNTESI®, with end connections 1/8", 1/4", 3/8", 1/2", 3/4", 1", is a device consisting of a filter and a reducing valve. built is with these same components co Filter and reducer, so has such same features technical. It reduces and purifies the air supplied by the compressor. Size: SY1, SY2. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: od -10°C up to +50°C. Connection: 1/8" BSP female ÷ 3/8" for SY1 and 3/8" BSP female ÷ 1" for SY2. Additional connection for a pressure gauge or fittings: 1/8" BSP female for SY1 and 1/4" for SY2. Condensate drain: manual / semi-automatic (RMSA), automatic (RA). Flow rate: 1300 l/min - 1/8", 2000 l/min - 1/4", 3000 l/min - 3/8" (SY1), 5800 l/min - 3/8" (SY2), 7200 l/min - 1/2", 7400 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Directional valve plug-in adjustable, type R43, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve directional electric, without a coil control PIV for mounting in-line. is to element pneumatics, which task is Control direction flow the medium working in pneumatic systems drive and control through connection or switching ways flow. appropriate for use with high frequency and short sometimes response. possible assembly in any position. Material body valve: aluminum. thread connection: M5 female, female BSP1/8”. medium working: filtered compressed air, oiled or not oiled. maximum Working pressure: from 6 bar to 30 bar, depending on kinds valve and a coil. Operating temperature: -15°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Complete coupling push-in angled BANJO, type R54, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
        Go to Top