Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil installation hydraulic, fuels, liquids based on water. on request micro-perforated (for gases and air). Inner layer: polyester. Reinforcement: a polyester braid. Outer layer: polyurethane. Working pressure: from 80 bar to 200 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose with a conductive inner layer (R 5 Ω/m) intended for gas natural (CNG - Compressed Natural Gas). used for filling tanks vehicles driven CNG. layers outer is characterized elevated resistance on changing conditions atmospheric and abrasion. Meets the requirements of NFPA 52, ANSI/CSA NGV 4.2-2014, CSA 12.52-2014. standards: ISO 8031, ISO 15500-17. Inner layer: conductive polyamide. Reinforcement: aramid braids. Outer layer: micro-perforated polyurethane. Working pressure: 345 bar. Operating temperature: od -40°C up to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose with fibres conductive in braid (R 4 Ω/m) intended for solvents, paints, isocyanate, polyol, liquids based on water. standards: ISO 8031, SAE 100R7, EN855-R7, ISO 3949-R7. Inner layer: polyamide. Reinforcement: double polyester braid with fibres conductive. Outer layer: micro-perforated polyurethane. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, liquids based on water. Available also in version with microperforation (for gases and air), Marked letters "MP" on the end index. Inner layer: polyamide. Reinforcement: a steel braid. Outer layer: polyurethane. Working pressure: from 70 bar to 375 bar - depending on the diameter. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil installation hydraulic, fuels, liquids based on water. Do use in the vicinity transformers and installation electric medium and high voltage. Non-conductive - leakage under the standard's test conditions lower than 50 µA for a voltage of 246 kV/m over 5 min. standards: ANSI 92.2, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: orange polyurethane. Working pressure: from 70 bar to 230 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 77 bar to 235 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose non-conductive charges electric - leakage in conditions testing acc. to standards SAE 100 R8 smaller od 50 µA for voltage 246 kV/m through 5 min., used in the vicinity installation electric. Inner layer: polyester. Reinforcement: two aramid braids. Outer layer: orange polyurethane. Working pressure: 700 bar. Operating temperature: od -40°C up to +100°C (for water and liquids based on water max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. standards: SAE 100R8, ISO 3949-R8 (except DN8). Inner layer: polyester. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 140 bar to 362 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, liquids based on water. standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyamide. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. Inner layer: polyester. Reinforcement: an aramid braid + a steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 175 bar to 500 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, liquids based on water. standards: SAE 100R7, ISO 3949-R7. Inner layer: polyamide. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 145 bar to 420 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 230 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose in a twin version (two hoses with a welded outer layer) intended for oil installation hydraulic, gases, air, fuels, liquids based on water. standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 140 bar to 210 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, liquids based on water. Inner layer: polyamide. Reinforcement: a steel braid. Outer layer: micro-perforated polyurethane. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, liquids based on water. on request micro-perforated (for gases and air). Inner layer: polyamide. Reinforcement: a double steel braid. Outer layer: polyurethane. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose in a twin version (two hoses with a welded outer layer) intended for oil installation hydraulic, gases, air, fuels, liquids based on water. standards: DIN 24951, SAE 100R7, ISO 3949-R7. Outer layer: micro-perforated polyurethane. Working pressure: from 157 bar to 215 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, antistatic (R 4 Ω/m) hose intended for solvents, paints, isocyanate, polyol, gases, air, liquids based on water. standards: ISO 8031, SAE 100R8, ISO 3949-R8. Inner layer: polyamide. Reinforcement: a double aramid braid with fibres conductive. Outer layer: micro-perforated polyurethane. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for filling cylinders gas. An odourless inner layer compliant with the requirements of FDA 21 CRF, directive 2011/10/EC and CGA G-7.1-2004 (for breathing air). Not should use for gases explosive, e.g. oxygen, hydrogen. Assembly: use type Z fittings. Inner layer: polyester. Reinforcement: an aramid braid. Outer layer: micro-perforated polyurethane. Operating temperature: od -40°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil installation hydraulic, fuels, liquids based on water. on request micro-perforated (for gases and air). Inner layer: polyester. Reinforcement: a steel braid. Outer layer: polyurethane. Working pressure: from 70 bar to 325 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, liquids based on water. is suitable for use in environment high humidity and salty air. on request micro-perforated (for gases and air). Inner layer: polyamide. Reinforcement: an aramid braid + a steel braid. Outer layer: polyurethane. Working pressure: from 200 bar to 500 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil installation hydraulic, fuels, liquids based on water. Do use in the vicinity transformers and installation electric medium and high voltage. Non-conductive - leakage under the standard's test conditions lower than 50 µA for a voltage of 246 kV/m over 5 min. standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: orange polyurethane. Working pressure: from 157 bar to 220 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. Inner layer: polyester. Reinforcement: a polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 110 bar to 130 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for installation CO 2 in industrial and marine installations firefighting. resistant to very low temperatures. Inner layer: polyester. Reinforcement: a steel braid. Outer layer: micro-perforated polyurethane. Operating temperature: od -60°C up to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. standards: SAE 100R7, EN855-R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: one or two synthetic braids. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 210 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose in a twin version (two hoses with a welded outer layer) intended for oil installation hydraulic, fuels, liquids based on water. on request micro-perforated (for gases and air). Inner layer: polyester. Reinforcement: a steel braid. Outer layer: polyurethane. Working pressure: from 190 bar to 325 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. standards: SAE 100R18, ISO 3949-R18. Assembly: use type Z fittings. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: polyurethane. Working pressure: from 210 bar to 250 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, liquids based on water. Inner layer: polyamide. Reinforcement: an aramid braid + a steel braid. Outer layer: micro-perforated polyurethane. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. resistant to very low temperatures and heavy conditions atmospheric. standards: SAE 100R18, ISO 3949-R18. Inner layer: polyester. Reinforcement: one or two synthetic braids. Outer layer: micro-perforated polyurethane. Working pressure: 210 bar. Operating temperature: od -55°C up to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil installation hydraulic, fuels, liquids based on water. on request micro-perforated (for gases and air). Assembly: contact TUBES INTERNATIONAL®. Inner layer: polyester. Reinforcement: an aramid braid + a steel braid. Outer layer: polyurethane. Working pressure: from 200 bar to 425 bar - depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose in a twin version (two hoses with a welded outer layer) intended for oil installation hydraulic, gases, air, fuels, liquids based on water. Inner layer: polyester. Reinforcement: a steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 180 bar to 300 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose in a twin version (two hoses with a welded outer layer) intended for oil installation hydraulic, gases, air, fuels, liquids based on water. standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 250 bar to 362 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose in a twin version (two hoses with a welded outer layer) intended for oil installation hydraulic, gases, air, fuels, liquids based on water. standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 245 bar to 350 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose antistatic (R 4 Ω/m) intended for conveying media non-conductive. Inner layer: polyamide. Reinforcement: two aramid braids. Outer layer: blue polyurethane. Working pressure: 700 bar. Operating temperature: od -40°C up to +100°C (for water and liquids based on water max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for conveying aggressive substances chemical such as paints, solvents. Inner layer: polyamide. Reinforcement: an aramid braid + a steel braid. Outer layer: black polyurethane. Working pressure: 700 bar. Operating temperature: od -40°C up to +100°C (for water and liquids based on water max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for high-pressure systems hydraulic. Inner layer: polyester. Reinforcement: an aramid braid + a steel braid (UH-OL8M-06 - Reinforcement hose consists of two aramid braids). Outer layer: black polyurethane. Working pressure: 700 bar. Operating temperature: od -40°C up to +100°C (for water and liquids based on water max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose double consisting with two cores hose type STANDARD. Inner layer: polyester. Reinforcement: an aramid braid + a steel braid. Outer layer: black polyurethane. Working pressure: 700 bar. Operating temperature: od -40°C up to +100°C (for water and liquids based on water max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, antistatic (R 5 Ω/m) hose intended for gas natural (CNG - Compressed Natural Gas). used for filling tanks vehicles driven CNG. standards: ISO 8031, ISO 15500-17. Inner layer: conductive polyamide. Reinforcement: aramid braids. Outer layer: micro-perforated polyurethane. Operating temperature: od -40°C up to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, liquids based on water. resistant to salt water sea. on request micro-perforated (for gases and air). Assembly: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: an aramid braid + a steel braid. Outer layer: polyurethane. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for gas natural (CNG - Compressed Natural Gas). used for filling tanks vehicles driven CNG. Available version double with tube venting. standards: ISO 15500-17. Inner layer: black polyamide conductive. Reinforcement: one or two aramid braids + a synthetic braid. Outer layer: red micro-perforated polyurethane. Working pressure: 350 bar. Operating temperature: od -40°C up to +70°C.
