Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible hose suction-delivery made of special, oil-resistant blend PVC. intended for conveying oils mineral and hydrocarbons and water industrial, sewage, liquid fertilisers, some chemicals – in particular tam, where elevated resistance PVC on carbon is required. Not is suitable for hydrocarbons aromatic (benzene, toluene, xylene etc.). It can be used for some products chemical – diluted acids, bases and alcohols. hose retains its flexibility even in sub-zero temperatures use, a its low weight and small radius bending ensure convenience and ease operation. Reinforcement spiral with hard PVC, resistant on impact, ensures very good strength on vacuum and kinking hose. smooth surface inner and outer. resistant to radiation UV, ozone, conditions atmospheric, abrasion. used widely in industry, agriculture, construction and road engineering. as hose reinforced spiral with hard PVC (without braid) is characterized a certain elongation under pressure, co should take into account in use, especially in temperatures above 40°C. Hose material: blue PVC. Reinforcement: spiral with white, hard PVC. Working pressure: from 2 bar to 5 bar - depending on the diameter hose. Operating temperature: od -25°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong, o thick wall and thick spiral, flexible hose intended vacuum extraction and conveying materials abrasive e.g. sand, gravel, grain. Dla all types industry, in particular used for loading and emptying silos, vehicles and excavators suction, handling with tankers etc. thick wall and very dense spiral reinforcing ensures high resistance to vacuum. smooth inside, not compressible, not very pliable, but flexible, also in low temperatures. O excellent resistance to abrasion, resistant also on microbes and hydrolysis. Not toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. hose marked is an arrow indicating correct direction flow medium. The hose wall thickness is measured between the spiral. Other diameters may be available on special order. hoses ECO 2.0 and ECO 2.5 independently od its wall thickness, differ between each other design, a co za this goes also parameters. ECO 2.0 thanks to dense spiral has greater resistance to vacuum, ale is less pliable, whereas ECO 2.5 o greater stroke spiral is more pliable and flexible, especially in greater diameters. hose ECO produced is in process production compliant with with policy sustainable growth in which uses raw materials originating with recycling pure waste with process production, energy renewable, closed circulation water and other innovation. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 2.0 mm (ECO 2.0), 2.5 mm (ECO 2.5). Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, economical hose suction-delivery for applications universal. smooth inside, with outside lightly Serrated. intended for water, light chemicals, sludge and sewage, agents protection plants, other liquids (avoiding fat, oils and hydrocarbons). also for air, vacuum conveying dusts, powders, light granulates and other lightly abrasive substances bulk. In that case the abrasiveness and the possible problem of static electricity must be taken into account. Widely used in agriculture, horticulture and use domestic. Hose material: green clear PVC. Reinforcement: white rigid-PVC spiral. Vacuum at a temperature of 20°C: 0.6 bar. Operating temperature: from -20°C to +60°C. As the working temperature rises, the hose's working vacuum value decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, exceptionally soft and flexible, A universal hose laboratory free of phthalates (DEHP). excellent solution for complex installations equipment laboratory demanding small radii bends and repeated bends. Ten ultra soft hose is resistant na twisting and crushing and remains flexible in low temperatures (for -55°C). thanks to its softness nie requires large forces for compression consists ofc ideal solution for pumps peristaltic o low moment swivel or powered battery. is characterized greater service life in use in pump peristaltic od typical hoses silicone, having simultaneously good resistance chemical na range corrosion media (acids, bases, salts, alcohols). compliant with requirements FDA for contact with food and REACH. sterilization only oxide ethylene. Length of a full hose roll 15 m. The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: PVC (special, without DEHP). Maximum operating temperature: +52°C. temperature brittleness: -55°C. Hardness: 40° Shore (A). Density: 1.1 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery for demanding, versatile applications in industry food. excellent for conveying many types products food such as: olive oil, wine, beer, juices fruit, milk, fats and alcohols with a concentration up to 96%. The inner layer is free of phthalates, plasticisers and components of animal origin. Contains no phthalates or bisphenol A and no polycyclic aromatic hydrocarbons (PAH Free), in accordance with ZEK 01.4-08 Cat.1. Tested for the presence of heavy metals. Layer outer resistant to conditions atmospheric and ozone. standards and requirements : industry food, contact with food 1935/2004/EC and EC 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, BfR XXI kat. 2, D.M. 21/03/73, 3-A Sanitary Standard 18-03 class II. Inner layer: white, smooth synthetic rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: blue synthetic rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, semi-transparent, strong and flexible hose reinforced a braid, intended for higher pressures. made with polyether - polyurethane, free of plasticizers, exceptionally resistant na abrasion and tearing, is characterized small radius bending and flexibility even in low temperatures. withstands cyclic changing temperatures. resistant na oils, greases and fuels and range chemicals. found use in many branches industry: conveying products abrasive and viscous, sludge and pastes, conveying granulates and powders, lubrication and degreasing, for liquids cooling in automotive, for air in pneumatics and automation industrial. used in industry food and cosmetic - meets requirements FDA 21 CFR 177.1680 and FDA 21 CFR 177.2600 for contact with food and NSF-61 for use for water drinking (with limitation length hose depending od diameter). length full roll hose 30 m (od diameter internal 31.8 mm - 15 m). pressure working determined relative to pressure bursting at factor safety 1:4. Material: tygothane® - polyurethane - polyether (PU). temperature use: from -73°C to +82°C. temperature brittleness: -73°C. Hardness: 85° Shore (A). Density: 1.12 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlack, opaque, the highest quality flexible hose with rubber fluorine, resistant na solvents, fuels, oils, aggressive chemicals, also in conditions elevated temperatures. used for solvents cleaning (laundries chemical, systems recovery solvents), aggressive chemicals, acids and bases, hot oils and fuels. is suitable for pumps peristaltic. resistant na ozone, light solar and conditions atmospheric. opaque black wall hose secures completely substances sensitive na light. process production hose with annealing po vulcanization removes all residue and ensures minimal degassing, required in use vacuum and space. Length of a full hose roll 15 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: fluoroelastomer (FKM). Maximum operating temperature: +204°C. temperature brittleness: -51°C. Hardness: 60° Shore (A). Density: 1.90 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable, resistant chemical and temperature-wise two-layer hose intended for discharge and conveying most aggressive chemical vapours, gases, dusts and fibres (non-abrasive), air blowing hot air. very good resistance chemical on aggressive chemicals thanks to internal layer PTFE. W version standard inner Layer white natural PTFE meets requirements industry food (FDA). W version antistatic EL black inner Layer PTFE is electrically conductive (R ≤10 6 Ω). hose is characterized high compressibility - for 1:6, strong design resistant on vibration, stretching and tearing, resistance on impacts thanks to outer spiral. resistant to radiation UV, ozone and aging. used in industry chemical, petrochemical and food. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for PTFE (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Material hose Inner layer: white foil PTFE PTFE - version standard HYTEF, black conductive foil PTFE PTFE - version antistatic HYTEF EL. Material hose Outer layer: black fabric polyethylene coated rubber CSM. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -35°C up to +175°C (momentarily up to +190°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable, resistant chemical hose intended for extraction and conveying aggressive chemical vapours solvents, paints, hydrocarbons, chemicals etc. thanks to conductive rubber FKM has properties anti-electrostatic (resistance surface R 6 Ω. very good resistance to oil, substances aromatic, most acids and chemicals. excellent resistance to elevated temperature. resistant to radiation UV and ozone. is characterized high compressibility - for 1:6, strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. used in industry paint, chemical and paper. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for FKM (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Hose material: fabric polyester coated FKM, antistatic, externally black. Reinforcement: outer spiral with sheet and wire steel. Operating temperature: od -25°C up to +210°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and o excellent flexibility hose intended for discharge vapours oils, dusts, light bulk materials. resistant to microorganisms and hydrolysis. meeting requirements FDA and directives European. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 0.4 mm. Operating temperature: od -40°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, thick, flexible hose intended for extraction and conveying materials abrasive: sand, gravel, rubbish, leaves and other contaminants. intended for use in cleaning streets, squares and ways. used in sweepers and other equipment services municipal and road. special The design hose P7 M STREET makes, that despite high wall thickness wall (1.4 mm) hose has smaller radius bends (1.2 x D) than standard hoses o tej wall thickness. folds hose between spiral at bending fold over on outside, co reduces resistance flow and wear. pliable, little compressible, smooth inside, flexible also in low temperatures. O sound resistance to abrasion, resistant to microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. Wall thickness measured between the spiral. assembly on spigots hose clamps bridge (right-handed). Other diameters may be available on special order. Hose material: transparent and black polyether – polyurethane. Wall thickness: 1.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction-delivery hose made in accordance with technology improvement platinum. sterilization steam (max. +135°C under pressure 3.5 bar through 30 min.). Layer inner Meets the requirements of FDA, USP kl.VI, D.M. 21/03/73 and regulation WE nr 10/2011. Layer outer meets requirements USP kl. VI, FDA and European Pharmacopoeia. hose compliant with EC 1935/2004 and 2023/2006/EC (GMP). free of substances origin animal, phthalates, adipates and materials subject restrictions the directive EC 1907/2006 (REACH). Safety factor 3:1. stated radius bends: refers to pressure static. pressure working (20°C): from 4 bar to 10 bar, depending on the diameter hose. Inner layer: white smooth fluoropolymer PFA. dynamic. Reinforcement: braids polyester, spiral of steel AISI 302. Outer layer: transparent silicone. Operating temperature: od -30°C up to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, reinforced a braid polyester hose free of smell and taste, non-toxic, nie containing phthalates and BPA (bisphenol A). intended for conveying and dispensing products food pod higher pressure. smooth, non-porous surface inner hose eliminates problem settling particles product and growth bacteria. resistant na action alkaline agents cleaning. meets requirements hygienic and for contact with food: European 1935/2004/EC and 10/2011 EU (for conditions and substances acc. to certificate), American FDA, NSF-51, NSF-61, 3-A, Japanese #370/1959 and MHLW370(3-D). compliant with REACH and California Proposition 65 - nie contains substances hazardous and banned. possible sterilization oxide ethylene. Po mounting ends o appropriate hygienic the structure possible is cleaning method CIP. Length of a full hose roll 15 m (od diameter internal 38.1 mm - 6 m). pressure working determined relative to pressure bursting at factor safety 1:4. Material: PVC (special). Maximum operating temperature: up to +74°C. temperature brittleness: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction - delivery intended for conveying and handling crude oil, petrochemical products and drill cuttings mixed with crude oil (up to 50% aromatic compounds). Layer inner with black, smooth blend rubber NBR/PVC. Reinforcement layers strength cord synthetic and spiral steel. It has copper wires ensuring electrical continuity between the hose ends – provided they are correctly connected to the ends. Layer outer with rubber chloroprene CR, flame-retardant, resistant to oil, water sea, abrasion and conditions atmospheric. Designed as a specialist OFFSHORE hose for use on drilling platforms. Widely used on North Sea platforms, successfully used in onshore applications. On special order available also versions o higher pressure working (20 / 27 / 30 / 35 bar), with specified force breaking at tension (maximum for 2T for 2”, 4T for 3” and 7T for 4”, 5” and 6”) and with approval type ABS ( American Bureau of Shipping Type Approval ) for complete line. Inner layer: black NBR rubber/PVC. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber CR. Working pressure: from 17 bar to 20 bar - depending on the diameter hose. Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery intended for conveying fuels aviation (kerosene aviation, kerosene, e.g. Jet A1) and products industry petrochemical containing up to 50% compounds aromatic, mainly for draining fuels of tanks aircraft, loading and unloading airport tankers and dispensers fuels. Layer outer antistatic, resistant to abrasion, oil and conditions atmospheric. has copper cable ensuring continuity electrical (R ‹ 100 Ω) between fitting hose and discharge charges electrostatic. Compliant with the requirements for aviation fuel hoses (type E/M) ISO 1825, API 1529:05, AS 2683, VG 95955, NFPA 407. Inner layer: black NBR rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: black synthetic rubber. Working pressure: 20 bar. Vacuum: 0.85 bar. Operating temperature: od -25°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong hose suction-delivery for fuels aviation, intended for filling and emptying tanks aircraft, loading and unloading airport tankers and dispensers fuels. as hose without element metal It can be used for direct filling and emptying tanks aircraft. can be wound on drums. Suitable for aviation fuel for turbine engines (aviation kerosene, kerosene, e.g. Jet A1), aviation petrol and fuels with an aromatic hydrocarbon content up to 50%. Layer inner with black, smooth, rubber NBR. Reinforcement layers high-strength cord synthetic and spiral with plastic polymer (PET). Layer outer with black, antistatic rubber synthetic, resistant to abrasion, conditions weather and contact with oil. The antistatic outer layer, in accordance with EN ISO 1825, provides the required low line resistance between the ends (10 3 Ω 6 Ω, ISO 8031). Compliant with the requirements for aviation fuel hoses (type F/Ω) API 1529:05, AS 2683, VG 95955, NFPA 407. On special order available other diameter and hoses with fluorescent marking visible in night. Inner layer: black NBR rubber. Reinforcement: cord synthetic, spiral PET. Outer layer: black synthetic rubber. Working pressure: 20 bar. Operating temperature: od -25°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose Hyperline FX SS AS SI WHITE to light, flexible hose PTFE. Ze regard na its properties recommended is for conveying hot media, applications CIP. hose can be delivered with meter, jak and in the molds complete lines. Layer outer in the molds white silicone facilitates maintaining cleanliness. such solution protects also the operator against burn. high resistance layer internal na long-term operation steam water. at temperature use above +160°C maximum pressure working given in data technical should reduced o 1% na each 1°C above tej temperatures. for example at temperature 180°C maximum pressure working for hose AF-FXSS-10 is: 100 bar – (180°C-160°C) x 1 = 100 bar – 20% = 80 bar. the given in data value vacuum, defined is for temperatures use up to 150°C. hose standard is in version antistatic, Available also in version with natural PTFE. Material hose: inside smooth, externally Serrated, antistatic PTFE (teflon). Reinforcement: single braid of steel AISI 304 with additional layer protective with white rubber silicone. pressure working: from 50 bar to 110 bar - depending on diameter hose. temperature use: from -70°C to +204°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose HYPERLINE V (VISIFLON) has layer inner made with high quality serrated PTFE ensuring exceptional flexibility hose and resistance na vibration. has braid with fiber polypropylene characterized by low mass and high chemical resistance. at temperature use above +80°C maximum pressure working should reduced o 5% na each 1°C rise temperatures. for example at temperature 90ºC maximum pressure working for hose AF-VFPB-19 is: 16 bar – (90°C-80°C) x 5 = 16 bar – 50% = 8 bar. exists possibility order version in black braid polymer (version PBB), o similar characteristics jak version PB, for applications tam, where color bright nie can be used. available versions: standard (orange) and antistatic (black). antistatic teflon version AS, contains appropriate distributed in PTFE carbon and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation charges electric. Material hose: spirally Serrated PTFE (teflon). Reinforcement: braid polypropylene. pressure working: od 12.5 bar up to 30 bar - depending on diameter hose. temperature use: from -30°C to +100°C. resistant na full vacuum for temperatures: +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, crystalline transparent, flexible hose free of smell and taste, non-toxic, nie containing phthalates and BPA (bisphenol A). intended for conveying milk and products milk, used in equipment milking. smooth, non-porous surface inner hose eliminates problem settling fat, particles product and growth bacteria. built-in in wall hose blue tape ensures customer o receipt original hose TYGON® S3™ M-34-R, designed specially for transport raw milk. meets requirements hygienic and for contact with food: European 1935/2004/EC and 10/2011 EU (for conditions and substances acc. to certificate), American FDA, 3-A, Japanese MHLW370(3-D). cleaning through flushing acc. to special procedures. compliant with REACH and California Proposition 65 - nie contains substances hazardous and banned. length full roll hose 30 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: PVC (special). Maximum operating temperature: up to +74°C. temperature brittleness: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose with base magnetic and valve for supply coolant - system 1/4". parts components: 20 segments (L=300 mm), nozzle flat 1", valve with a thread external 1/4" BSPT and base magnetic with "tail" for hose 1/4" (size thread fittings 1/8" NPT). Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose suction supplied in the molds ready line, o various lengths, with mounted fitting, intended for sewage and water. externally Serrated, almost smooth in center. special profile makes, that hose is resistant to vacuum and creasing, (returns for its shape). as hose with polyethylene has very good resistance chemical and resistance to corrosion biological (rotting, rotting). is flexible in low temperatures. hose is used for emptying septic tanks and portable toilets, in construction, facilities tourist, in marinas and on airports. available length: od 10 m for 25 m. Hose material: yellow profile polyethylene (PE). Reinforcement: black profile polyethylene (PE). Vacuum: 0.95 bar (for diameter 51mm ÷ 76 mm); 0.85 bar (for diameter 102 mm). Operating temperature: od -40°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose suction supplied in the molds ready line, with mounted fitting, a clamp and a cable, intended for sewage and water. externally Serrated, almost smooth in center. special profile makes, that hose is resistant to vacuum and creasing, (returns for its shape). as hose with polyethylene has very good resistance chemical and resistance to corrosion biological (rotting, rotting). is flexible in low temperatures. short sections hose o length 1 m with fitting used are as hoses cover, rested on edge hole channel, inside which introduced is for channel pressure hose cleaning or line inspection with camera. mounted on the tip clamp with attached a cable o length 7.5 m allows on maintaining appropriate position hose cover. length: 1 m. Hose material: yellow profile polyethylene (PE). Reinforcement: black profile polyethylene (PE). Vacuum: 0.95 bar. Operating temperature: od -40°C up to +60°C.
