0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -55 — 0

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 50 — 150

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality Connection push-in straight with thread external parallel (BSP or M5), made entirely of steel AISI 316L, series 60000. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-in straight through-flow for connecting hoses with plastics (for hoses polyurethane required minimum Hardness per Shore (A): 98°). Material: brass nickel-plated. Operating temperature: od -15°C up to +130°C. Working pressure: 30 bar. sealing: Viton.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Coupling push-in straight, type R 3 NSF

          All products | Push-in fittings
          0 €
          Coupling straight, series F type R 3 NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: brass nickel-plated. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Nipple with thread external BSPT type A2, intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Washer aluminum, type D11

          All products | Banjo fittings
          0 €
          Washer aluminum type D11 Recommended for seal couplings threaded type A and couplings BANJO series D. washer under thread M5 made is with polyamide.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Adapter reducing of steel stainless type 62040 with thread external BSPT and thread internal BSP. Material: steel AISI 316L. Operating temperature: od -20°C up to +225°C. Working pressure: 140 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Silencer MWSFE with male thread, brass

          All products | Equipment for pneumatic valves
          0 €
          Silencer MWSFE with thread external used in systems compressed air in order to reducing level noise. reducer noise that can obtain through assembly silencer, measured at pressure supply 5 bar, in distance 1m and under angle 90° (in order to avoiding direct stream)od axis silencer, is average depending on size 30 dB. Material: brass nickel-plated, bronze sintered nickel-plated. Operating temperature: od -10°C up to +80°C. Working pressure: 12 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tee type C9 intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose pneumatic polyurethane PUR

          All products | Pneumatic hoses
          0 €
          Highly flexible and resilient hose polyurethane, having optimal properties mechanical and very high strength on compression in wide the scope temperatures. The calibrated outer diameter and wall thickness allow the use of easy-to-use push-in fittings from leading manufacturers. Resistant to abrasion, solvents, fuels, hydrocarbons. used in pneumatic and hydraulic systems, tool lines and industrial robots, etc.. Hardness per Shore (A): 90°. Available in colour natural, black, blue, green, red and yellow. Hose material: polyurethane PUR. Working pressure: from 9 bar to 14.3 bar, depending on the diameter hose. Operating temperature: od -40°C up to +85°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Very flexible, resistant to abrasion, breaking and kinking spiral, reinforced hose intended specially for workshops automotive, for pneumatic systems control, tools hand, robots industrial, etc. terminated on both sides straight sections o length 100 mm and 500 mm and fitting with thread external BSPT. Hardness per Shore (A): 98°. The stated total length is the maximum hose length after stretching. Hose material: blue polyurethane PUR. Working pressure: up to 15 bar. Operating temperature: od -40°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A bracket fixing for REG and FR

          Accessories for FRL | All products
          0 €
          A fixing bracket (angle bracket) intended for the systems: SKILLAR series 100, BIT, SYNTESI and NEW DEAL.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check RFL L type B (coupling push-in on inlet and the outlet valve) regulates stream flowing air in obu directions. Working pressure: 10 bar. Operating temperature: od -20°C for +60° C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Straight connector SPEEDFIT, plastic plastic

          All products | Pneumatic piping systems
          0 €
          Straight connector for system SPEEDFIT used in installations compressed air. The installation can be made with use pipes with plastic or metal (copper, brass, aluminum). Material: plastic plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Straight connector type B3 with a ring cutting Intended for connecting pipes copper and hoses with plastics. W case connecting with hoses recommended is use ferrule reinforcing (B12). Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Elbow swivel, screw with thread external tapered BSPT, series F type R 31C NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: brass nickel-plated. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-in straight through-flow, type R3, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality Connection push-in straight with thread external BSPT, made entirely of steel AISI 316L, series 60000. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Adapter thread external BSPT/thread internal BSP type A4, intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Body angled coupling BANJO with a ring cutting type D17. screws through-flow for body: D7, D8, D9, D10. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A socket reducing of steel stainless type 62310 with thread internal BSP. Material: steel AISI 316L. Operating temperature: od -20°C up to +225°C. Working pressure: 140 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tee screw-together "T", type B9, with a ring cutting Intended for connecting pipes copper and hoses with plastics. W case connecting with hoses recommended is use ferrule reinforcing (B12). Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality coupling Tee "T", made entirely of steel AISI 316L, series 60230. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose pneumatic polyethylene PE

          All products | Pneumatic hoses
          0 €
          Light, flexible hose intended for air, water and other media. resistant to chemicals, safe physiologically, free of taste. Meets BGA and FDA requirements. Available in colour natural, black and blue. Hose material: polyethylene LDPE. Working pressure: from 5 bar to 17 bar, depending on the diameter hose. Operating temperature: od -30°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose pneumatic spiral polyamide SCAR

          All products | Pneumatic hoses
          0 €
          Line - hose spiral polyamide intended for all kinds equipment pneumatic, systems control, etc. terminated on both sides section simple o length 100 mm and fitting with thread external BSPT. The stated total length is the maximum hose length after stretching. Hose material: blue polyamide PA 12 (nylon). Working pressure: up to 28 bar (depending on the diameter hose). Operating temperature: od -40°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A connector electrical for coils 22 mm

          All products | Equipment for pneumatic valves
          0 €
          A connector electrical for coils 22 mm, Diameter cable: PG9. color: black or transparent.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V2V L two-position two-way in version ended on both sides couplings push-in (line - line). Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling with thread external and spring protective intended for hoses with soft plastics. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-on straight type C3 intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fitting angled 90° with thread external BSP, series S, type PLM. economical solution for connecting flexible hoses pneumatic o metric calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Connection straight with thread external tapered BSPT, series F type R 1C NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: brass nickel-plated. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling with thread external for system SPEEDFIT used in installations compressed air. The installation can be made with use pipes with plastic or metal (copper, brass, aluminum). Material: plastic plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Elbow 90° of steel stainless type 62520 with thread internal BSP and thread external BSPT. Material: steel AISI 316L. Operating temperature: od -20°C up to +225°C. Working pressure: 140 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Elbow thread external BSPT and thread internal BSP type A10 intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Spigot with thread external for system SPEEDFIT used in installations compressed air. The installation can be made with use pipes with plastic or metal (copper, brass, aluminum). pushing spigot in coupling obtain possibility connecting for installation thread external. Material: brass. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Miniature valve reducing type RML (coupling push-in on inlet and the outlet valve) intended for reduction higher pressure for lower pressure za valve. range pressure output: 1 ÷ 8 bar. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Cutter for hoses plastic

          All products | Pneumatic hoses
          0 €
          Cutter for hoses plastic o diameters in the scope 3 ÷ 12 mm. color: orange.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Cutting ring, type B11

          All products | Cutting ring fittings
          0 €
          Cutting ring type B11 for connecting pipes copper and hoses with plastics for coupling type B. Material: brass.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bolt BANJO with o-rings, type D7

          All products | Banjo fittings
          0 €
          Bolt BANJO with o-rings type D7 for coupling type R28, R29. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality Connection Tee "T" with thread external BSPT, made entirely of steel AISI 316L, series 60210. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Tee plug-in “T”, type R 5 NSF

          All products | Push-in fittings
          0 €
          Tee through-flow, series F type R 5 NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: brass nickel-plated. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
        Go to Top