Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe SKILLAIR® V3V electric shut-off valve, size 100, is a high-performance three-way solution designed to ensure maximum safety and efficiency in pneumatic systems. Built as a normally closed valve, it reliably isolates the supply air while simultaneously venting the system when in the closed position, making it an ideal choice for maintenance operations and system protection. With a robust design capable of handling supply pressures up to 10 bar and operating temperatures up to +50°C, it guarantees consistent performance even under demanding conditions. Delivering an impressive flow rate of 1650 l/min at 6 bar inlet pressure (Δp = 1 bar), this valve ensures optimal airflow management and operational reliability. Its compact, end-plate-free construction allows for easy integration into existing setups, while the trusted SKILLAIR® engineering ensures durability, precision, and long-term value for industrial applications.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe SYNTESI® V3V series manual shut-off valve is a reliable and versatile solution designed to ensure maximum safety and efficiency in pneumatic systems. This three-way, two-position, normally closed valve effectively isolates the supply air while simultaneously venting the system, making it an ideal choice for maintenance operations and downtime management. Engineered with flexibility in mind, it offers the option to secure the valve with two padlocks (size SY1) or three padlocks (size SY2) with a 3 mm diameter, as well as an alternative version with a Ø 7 hole for a single padlock, ensuring enhanced protection against unauthorized use. The valve is equipped with practical auxiliary connections on both the front and rear surfaces (1/8” for SY1 and 1/4” for SY2), allowing easy integration of pressure gauges, sensors, or additional air intakes. Available in sizes SY1 and SY2, it supports BSP threaded connections of 1/8” and 1/4”, operates with supply pressures up to 15 bar, and withstands temperatures from -10°C to +50°C. With an impressive nominal flow capacity of up to 4000 l/min (at 6 bar inlet pressure and Δp = 1 bar), the V3V series guarantees dependable performance, making it a perfect choice for industries seeking safety, durability, and efficiency in their pneumatic applications.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe GZ V3V series G shut-off valve with BSP internal thread is a reliable solution designed to isolate the supply air from the working section of an installation, ensuring maximum safety and efficiency. Once closed, the valve automatically releases the air behind it into the atmosphere, making it an excellent safeguard during inspection, servicing, or maintenance tasks. Each set comes complete with a sturdy mounting bracket, a practical holder, a secure padlock, and two keys, providing both convenience and protection against unauthorized use. To enable flexible system design, GA connection sets in L, T, and U configurations allow seamless integration of individual components. Available in sizes 200, 300, and 400, the valve supports BSP connections from 1/8" to 1/2", operates under supply pressure up to 10 bar, and withstands temperatures up to +70°C. With simple manual control, this shut-off valve combines durability, functionality, and user-friendly operation, making it an indispensable element for safe and efficient pneumatic installations.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe MR FC series BIT regulator with controlled bleed is designed to deliver exceptional precision in maintaining stable output pressure, ensuring reliable performance even in demanding pneumatic applications. Thanks to its continuous micro-venting system, it guarantees consistent accuracy and minimizes fluctuations, making it an ideal choice for processes where pressure stability is critical. The regulator offers versatile output pressure ranges of 0–2 bar, 0–4 bar, or 0–12 bar, with a maximum supply pressure of up to 13 bar, allowing it to adapt seamlessly to various system requirements. Equipped with a GW 1/8" BSP pressure gauge connection, it ensures easy monitoring and integration into existing setups. Built to operate efficiently at temperatures up to +50°C, the MR FC series combines durability with high performance, providing a reliable solution that enhances productivity, reduces downtime, and supports optimal efficiency in industrial environments.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe SKILLAIR® lubricator series with end plates is designed to guarantee reliable lubrication of pneumatic systems through a precise oil mist distribution, ensuring optimal performance and extended service life of connected devices. Available in three compact sizes—100, 200, and 300—these units feature tank capacities of 50 cm³, 95 cm³, and 160 cm³ respectively, making them adaptable to a wide range of industrial requirements. With a supply pressure of up to 15 bar (13 bar for sizes 200 and 300) and an operating temperature tolerance up to +50°C, the lubricators deliver consistent performance even under demanding conditions. Their versatile BSP connections from 1/4" to 1" and impressive flow rates—1500 l/min for size 100, 3700 l/min for size 200, and 5500 l/min for size 300 at 6 bar inlet pressure with Δp = 1 bar—ensure seamless integration into diverse pneumatic installations. The series offers multiple oil filling methods tailored to operational needs: standard filling through tank disassembly or plug (STD), automatic replenishment during operation (CA), vacuum filling enabled by internal pressure drop (CD), automatic filling with minimum level control (CAML), and vacuum filling with minimum level monitoring (CDML). This flexibility, combined with robust construction and user-oriented design, makes the SKILLAIR® lubricators a reliable choice for industries seeking efficiency, durability, and simplified maintenance in their pneumatic systems.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe REG P pressure reducing valve from the SKILLAIR® series is a pilot-operated solution designed to ensure precise air pressure control even under fluctuating operating conditions. Engineered to minimize friction, it delivers exceptional accuracy with minimal hysteresis, making it ideal for applications where stability and reliability are crucial. A slight air bleed, characteristic of large-sized regulators such as the 400 series, supports proper functionality and does not indicate malfunction. Compact yet powerful, this 1/4" valve offers output pressure ranges of 0–2, 0–4, 0–8, and 0–12 bar, with a supply capacity of up to 13 bar and a maximum operating temperature of +50°C. Featuring BSP female threads (1/4" for connections and 1/8" for pressure gauges), it ensures easy integration into existing systems. With a flow rate of 140 l/min at 6 bar inlet pressure (Δp = 1 bar), the REG P guarantees consistent performance, especially when used with filtered air, making it a reliable choice for demanding industrial environments.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe FIL filter series SKILLAIR® is designed for highly efficient purification of compressed air, ensuring reliable removal of both liquid and solid impurities without the use of end plates. Available in three sizes—100, 200, and 300—these filters offer different filtration degrees of 5 µm, 20 µm, or 50 µm, allowing precise adaptation to specific application requirements. With a supply pressure of up to 15 bar and an operating temperature range reaching +50°C, the series guarantees consistent performance even under demanding conditions. Connections from BSP 1/4" to 1" provide installation flexibility, while condensate drainage options include manual, semi-automatic (RMSA), or fully automatic systems (SAC, RA) for maximum convenience. Delivering flow rates of 2000 l/min for size 100, 3100 l/min for size 200, and 5300 l/min for size 300 at 6 bar inlet pressure (Δp = 1 bar), the SKILLAIR® FIL filters combine durability, precision, and efficiency, making them an ideal solution for industries seeking optimal compressed air quality and long-term operational reliability.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe FIL filter series SKILLAIR® with end plates ensures highly efficient purification of compressed air by reliably removing both liquid and solid impurities, guaranteeing consistent performance and protection of pneumatic systems. Available in three sizes—100, 200, and 300—these filters offer filtration degrees of 5 µm, 20 µm, or 50 µm, allowing precise adaptation to specific application requirements. Designed for supply pressures up to 15 bar and operating temperatures up to +50°C, they provide flexibility and durability in demanding industrial environments. With connection options from GW BSP 1/4" to 1", the filters integrate seamlessly into various installations, while condensate discharge can be selected as manual, semi-automatic (RMSA), or automatic (SAC, RA) for optimal convenience. Delivering impressive flow rates of 2000 l/min for size 100, 3100 l/min for size 200, and 5300 l/min for size 300 at 6 bar inlet pressure (Δp = 1 bar), the SKILLAIR® FIL series combines reliability, efficiency, and adaptability, making it the ideal solution for ensuring clean, safe, and high-quality compressed air in a wide range of industrial processes.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe GR series G reducer with internal BSP thread is a reliable and precise solution designed to ensure stable output pressure, regardless of fluctuations in the supply line. Equipped with manual adjustment, it allows full control over the working parameters, while the included mounting bracket and pressure gauge make installation and monitoring quick and convenient. For flexible system design, connection sets GA in L, T, and U configurations enable seamless integration of individual components. Available in four sizes—200, 300, 400, and 600—the reducer offers impressive performance: up to 3000 l/min for size 200, 4000 l/min for size 300, 7500 l/min for size 400, and as much as 12000 l/min for size 600, measured at 6 bar input pressure with a Δp of 1 bar. With a supply pressure capacity of up to 10 bar, operating temperature up to +70°C, and BSP connections ranging from 1/8" to 1", the GR series stands out as a versatile and durable choice for demanding pneumatic applications, ensuring efficiency, safety, and long-lasting reliability.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe GF series G filter with BSP internal thread is a reliable solution designed to effectively remove impurities from compressed air, ensuring smooth and efficient operation of pneumatic system components. Equipped with an automatic condensate drain (A) and supplied with a practical mounting bracket, it offers both convenience and durability in everyday use. The filter is available in four sizes—200, 300, 400, and 600—covering a wide range of flow rates from 3100 l/min up to 12,000 l/min (at 6 bar inlet pressure, Δp = 1 bar), making it suitable for diverse industrial applications. With a filtration degree of 40 µm, supply pressure up to 10 bar, and operating temperature up to +70°C, it guarantees dependable performance even under demanding conditions. The BSP connection options from 1/8" to 1" provide flexibility and easy integration into existing systems, while GA connection sets in L, T, and U shapes allow seamless assembly of multiple components. This combination of high efficiency, robust design, and versatile connectivity makes the GF series G filter an essential element for maintaining clean compressed air and extending the service life of pneumatic equipment.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe GL series G lubricator with internal BSP thread guarantees reliable lubrication of pneumatic systems through a precise oil mist, ensuring smooth operation and extended service life of connected devices. Each unit is supplied with a practical mounting bracket for easy installation, while GA connection sets in L, T, and U configurations allow flexible assembly of multiple components. Available in sizes 200, 300, 400, and 600, the lubricators operate at supply pressures up to 10 bar and temperatures up to +70°C, with BSP connections ranging from 1/8" to 1". Designed for efficiency, they deliver impressive flow rates: 3200 l/min for size 200, 5400 l/min for size 300, 8300 l/min for size 400, and up to 12000 l/min for size 600 at 6 bar inlet pressure (Δp = 1 bar). This combination of durability, versatility, and performance makes the GL series an ideal choice for demanding pneumatic applications where reliability and precision are essential.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe GFR series G pressure regulator with internal BSP thread ensures reliable purification of compressed air, effectively removing impurities to protect and extend the life of pneumatic system components. Equipped with a manually adjustable regulator, it guarantees stable outlet pressure, maintaining consistent performance even with fluctuations on the inlet side. Each unit comes complete with a mounting bracket, holder, and pressure gauge, while optional GA connection sets in L, T, or U shapes allow flexible and secure assembly of multiple components. Available in sizes 200, 300, 400, and 600, the regulator offers a filtration degree of 40 µm, supports supply pressures up to 10 bar, and operates efficiently at temperatures up to +70°C. With BSP connections ranging from 1/8" to 1" and an automatic condensate drain, it delivers impressive flow rates of 2100 l/min (size 200), 3800 l/min (size 300), 6750 l/min (size 400), and 11100 l/min (size 600) at 6 bar inlet pressure with Δp = 1 bar. This combination of precision, durability, and versatility makes the GFR series an ideal solution for demanding pneumatic applications.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe SKILLAIR® D series filter with end plates ensures highly efficient purification of compressed air by removing both liquid and solid impurities with an exceptional filtration efficiency of 99.97% at 0.01 µm. Available in three sizes—100, 200, and 300—it offers flexibility to match diverse system requirements, delivering flow rates of 230 l/min, 360 l/min, and 500 l/min respectively at 6 bar inlet pressure (Δp = 1 bar). Designed to operate under supply pressures up to 15 bar and temperatures up to +50°C, the filter guarantees reliable performance even in demanding industrial environments. With BSP connections ranging from 1/4" to 1" and multiple condensate discharge options—manual, semi-automatic (RMSA), or fully automatic (SAC, RA)—it provides maximum adaptability and ease of integration. Engineered for precision and durability, the SKILLAIR® D series is the ideal solution for ensuring clean, safe, and efficient compressed air in applications where quality and reliability are critical.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe D series NEW DEAL fine filter with advanced coalescing element ensures exceptional air purity by effectively removing oil vapors and solid particles with an impressive filtration efficiency of 99.97% at 0.01 µm. Designed for demanding industrial applications, it operates reliably under supply pressures up to 18 bar and temperatures reaching +50°C, guaranteeing consistent performance even in challenging conditions. With a flow rate of 230 l/min at 6 bar inlet pressure (Δp = 1 bar), it delivers optimal efficiency while maintaining low pressure drop. The filter is available with versatile condensate drain options—manual, semi-automatic (RMSA), or fully automatic (SAC, RA)—to match specific system requirements and ensure hassle-free maintenance. Engineered for durability and precision, the D series NEW DEAL fine filter is the ideal solution for industries seeking maximum protection of pneumatic equipment, reduced downtime, and superior air quality in every application.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe DEP BIT series fine filter with integrated coalescing element is designed to ensure maximum air purity in compressed air systems and directly at actuating devices, providing reliable protection for sensitive components. Available in compact sizes of 1/8" and 1/4", it combines efficiency with space-saving installation, making it ideal for modern industrial applications. With a maximum inlet pressure of up to 13 bar and an operating temperature range reaching +50°C, the filter guarantees stable performance even under demanding conditions. The unit features a practical condensate drain, available in manual or semi-automatic (RMSA) versions, ensuring easy maintenance and continuous system efficiency. Delivering a recommended flow rate of 200 Nl/min at 6 bar, the DEP BIT series offers consistent filtration quality, reduced downtime, and extended service life of pneumatic equipment, making it a smart choice for industries seeking reliability, precision, and cost-effective operation.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe DEP series SYNTESI® precision filters with end connections ensure exceptional protection of pneumatic systems by effectively eliminating both liquid and solid impurities from compressed air. Thanks to the advanced coalescing cartridge, they guarantee an outstanding filtration level of 0.01 µm, meeting the strict ISO 8573-1: 1-7-2 air purity standard. Available in sizes SY1 and SY2, the filters operate reliably under supply pressures of up to 15 bar for SY1 and 13 bar for SY2, with a wide temperature range from -10°C to +50°C, making them suitable for diverse industrial environments. Designed for efficiency, they provide recommended flow rates of 460 l/min for SY1 and 620 l/min for SY2 at 6.3 bar, ensuring stable performance even in demanding applications. With the option of manual or semi-automatic (RMSA) condensate drainage, the DEP series SYNTESI® filters combine precision, durability, and ease of maintenance, offering a dependable solution for industries that require consistently clean and high-quality compressed air.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe specially designed lock for the Syntesi® series provides reliable protection against unauthorized interference with the pressure reducing valve settings or accidental activation of the shut-off valve. By ensuring that only authorized personnel can make adjustments, it safeguards the stability and efficiency of your pneumatic system, minimizing downtime and preventing costly malfunctions. Compact and easy to install, the lock integrates seamlessly with the Syntesi® components, offering both security and convenience without compromising performance. Ideal for industrial environments where precision and safety are paramount, this solution enhances operational reliability while extending the lifespan of your equipment.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe GA Series G two-way branching module with internal BSP thread is a versatile solution designed to optimize air distribution within FRL stations, enabling air intake from any desired point of the system. Engineered for reliability and efficiency, it supports supply pressures of up to 10 bar and ensures stable performance even in demanding industrial environments. With an operating temperature range reaching up to +70°C, the module guarantees durability and consistent functionality under varying conditions. Its compact design allows for easy integration into existing setups, while the robust construction ensures long-lasting operation. Ideal for applications requiring flexible air management, the GA Series G module enhances system efficiency, reduces downtime, and provides a dependable connection that supports smooth workflow across multiple pneumatic processes.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe PA branching module from the SKILLAIR® series with end plates is a versatile solution designed for efficient air intake from the FRL station at any stage of air preparation, regardless of its position within the installation. Available in sizes 100, 200, and 300, it ensures reliable performance under supply pressures of up to 15 bar (13 bar for sizes 200 and 300) and maintains consistent operation at temperatures up to +50°C. Equipped with BSP threaded connections ranging from 1/4" to 1", the module guarantees easy integration into diverse pneumatic systems. Its robust construction and flexible configuration make it an ideal choice for industries seeking optimized airflow management, enhanced system efficiency, and dependable operation in demanding environments.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe distribution module is a versatile solution designed to provide access to air from the FRL Newdeal unit at any stage of its preparation, whether it is reduced air, oil-free air, or supply air. Available in sizes 1/4", 3/8", 1/2", 3/4", and 1", it ensures seamless integration into various pneumatic systems. The module features BSP female thread connections: 1/8" for 1/4" size, 1/4" for 3/8" to 1/2", and 1/2" for 3/4" to 1", offering flexibility and compatibility with a wide range of setups. With a working pressure capacity of up to 18 bar and an operating temperature range from -10°C to +50°C, it guarantees reliable performance even in demanding industrial environments. Engineered for efficiency and durability, this module supports precise air distribution, enhancing productivity and ensuring optimal operation of pneumatic equipment. Its robust design and adaptability make it an essential component for professionals seeking dependable air management solutions.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe Branching Module – Version 2 is a versatile coupling element designed to connect seamlessly between any SYNTESI® modules, enabling an independent air intake for greater flexibility in pneumatic system design. Featuring a two-way configuration with both upper and lower connections, it ensures efficient distribution of compressed air while maintaining compact dimensions. Available in sizes SY1 and SY2, the module adapts to diverse system requirements, with performance parameters directly dependent on the SYNTESI® components it is integrated with. Delivering impressive flow rates of 1550 l/min at 1/8" (SY1) and 7000 l/min at 3/8" (SY2) under an inlet pressure of 6 bar (Δp = 1 bar), it guarantees reliable operation in demanding industrial environments. Engineered for durability and precision, the Branching Module enhances modularity, simplifies installation, and optimizes airflow management, making it an essential solution for professionals seeking efficiency, scalability, and top performance in their pneumatic applications.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe branching module is a versatile coupling element designed to connect any two SYNTESI® modules while ensuring an independent air intake for optimal system performance. Equipped with four sockets for terminal connections on each plane, it offers maximum flexibility in configuration and installation. Available in sizes SY1 and SY2, the module delivers reliable operation under demanding conditions, with pressure resistance up to 15 bar for SY1 and up to 13 bar for SY2. Engineered to perform in a wide temperature range from -10°C to +50°C, it guarantees consistent efficiency across various environments. The high flow capacity further enhances its adaptability, providing 500–2000 l/min for SY1 and 1500–4500 l/min for SY2 at an inlet pressure of 6 bar (Δp = 1 bar). This makes the branching module an ideal solution for industries seeking robust, efficient, and customizable pneumatic systems that ensure uninterrupted productivity and seamless integration.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe membrane-type pressure reducing valve with integrated pressure gauge in the knob is a compact and highly precise solution designed for reliable panel mounting applications. Equipped with an atmospheric air vent, it ensures stable and accurate regulation of outlet pressure, even under demanding operating conditions. Manufactured from a durable zinc and aluminum alloy, the valve combines strength with long-lasting performance. With a size of 3/8” and a BSP female thread connection, it offers easy installation and compatibility with a wide range of systems. Supporting supply pressures up to 25 bar and operating temperatures from -10°C to +90°C, it guarantees versatility across various industrial environments. Delivering a flow rate of 1000 l/min at 8 bar inlet pressure and Δp = 1 bar, it provides efficient performance for high-demand applications. Available with dedicated panel mounting components (EW-367K33), this valve is the ideal choice for professionals seeking precision, durability, and seamless integration.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe pneumatic lubricator offers a reliable and efficient way to maintain optimal lubrication in pneumatic systems by generating a fine oil mist that protects actuating devices and extends their service life. Utilizing the Venturi nozzle effect, the device ensures precise oil suction, while the adjustable needle allows accurate regulation of droplet quantity in the airflow. Designed for versatility, it features auxiliary connections on both front and rear surfaces, enabling easy integration with manometers, pressure sensors, or additional air intake points. Available in two sizes, SY1 with a 60 cm³ tank and SY2 with a 130 cm³ tank, the lubricator adapts to diverse industrial needs. SY1 operates at supply pressures up to 15 bar, while SY2 supports up to 13 bar, both within a temperature range of -10°C to +50°C. Flexible BSP connections from 1/8" to 3/8" for SY1 and from 3/8" to 1" for SY2 ensure compatibility with various system setups. High flow rates—ranging from 1600 l/min at 1/8" to 6100 l/min at 1" (at 6 bar inlet pressure, Δp = 1 bar)—guarantee efficient performance even in demanding applications. This makes the lubricator an indispensable component for industries seeking durability, precision, and consistent pneumatic system operation.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe compressed air lubricator with a durable polycarbonate tank is designed to provide reliable oil mist lubrication for pneumatic systems, ensuring smooth operation and extended service life of connected devices. With a compact DN6 size and vertical installation, it integrates easily into various setups while maintaining efficiency. The robust brass housing combined with NBR sealing guarantees resistance to wear and secure performance under demanding conditions. Its 40 cm³ tank capacity supports continuous operation, while the supply pressure of up to 16 bar and operating temperature range from -10°C to +50°C make it suitable for diverse industrial environments. Featuring a G 1/4" BSP connection and an impressive flow rate of 1160 l/min at 6 bar inlet pressure (Δp = 1 bar), it delivers consistent lubrication even in high-performance applications. Weighing only 400 g, this lubricator combines strength with lightweight design, offering a dependable and efficient solution for maintaining pneumatic installations at peak performance.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe soft start valve ensures safe and controlled filling of pneumatic systems with compressed air by operating in two stages. When a control signal is applied, the shut-off valve opens and air flows gradually through the throttling valve, allowing the system to reach around 40–60% of the supply pressure before switching to full flow through the entire cross-section. This prevents sudden surges of air that could cause shock loads and mechanical stress on actuators and machine components. Once the control signal is removed, the valve closes and the system is safely vented. Designed for reliability and protection, the valve is available in sizes SY1 and SY2 with BSP connections from 1/8" to 1", and additional outlet connections of BSP 1/8" (SY1) or BSP 1/4" (SY2) located at both the front and rear. It operates within a supply pressure range of 3–10 bar and a temperature range of -10°C to +50°C, offering nominal flow rates from 1250 l/min up to 4800 l/min at 6.3 bar (Δp = 1 bar). This makes it an ideal solution for installations requiring smooth system start-up, enhanced equipment longevity, and dependable performance in demanding industrial environments.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe soft start valve is designed to ensure a safe and controlled introduction of compressed air into pneumatic systems, effectively protecting actuators from sudden pressure surges and extending the overall service life of the installation. In the electrically controlled version, when no pilot pressure is applied, the airflow is gradually introduced from the inlet to the outlet through a precision needle valve, allowing the system to build pressure smoothly and reliably. Once an external electrical signal is received, the valve switches to full opening mode, enabling unrestricted airflow through the entire cross-section for maximum efficiency. Unlike standard solutions, this valve does not vent the pneumatic system, ensuring stable operation and preventing unnecessary energy loss. With a compact size of 100, a supply pressure capacity of up to 10 bar, and an operating temperature range up to +50°C, it guarantees versatile use in various industrial environments. Delivering a high flow rate of 2000 l/min at 6 bar inlet pressure (Δp = 1 bar), it provides excellent performance for demanding applications, making it an ideal choice for modern automation systems that require both safety and efficiency.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe soft start valve ensures a safe and controlled supply of compressed air into pneumatic systems, effectively protecting actuators from sudden pressure surges. In its standard version, the valve automatically opens once the outlet pressure reaches around 50% of the inlet pressure, guaranteeing a smooth and gradual pressurization. The pneumatic control variant allows air to pass through a precision needle valve when no pilot pressure is applied, while an external pneumatic control signal instantly overrides this function, enabling unrestricted airflow through the full valve cross-section. Designed for reliability and efficiency, the valve operates with supply pressures up to 15 bar, at temperatures reaching +50°C, and delivers an impressive flow capacity of 2000 l/min at 6 bar inlet pressure with a pressure drop of 1 bar. With its robust size 100 construction and advanced functionality, it is an ideal solution for applications requiring both safety and high performance in demanding pneumatic environments.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe V3V manual shut-off valve from the NEW DEAL series is a reliable solution designed to ensure maximum safety and efficiency in pneumatic systems by completely isolating the working installation from the compressed air supply. Equipped with an advanced triple locking mechanism, it guarantees secure operation, while the intuitive push-button opening system provides quick and effortless handling. Thanks to the innovative mushroom design, the valve achieves exceptionally high flow rates, making it ideal for demanding industrial applications. Available with GW BSP connections from 1/4" to 1/2", it offers impressive performance with a nominal flow of 1500 l/min for the 1/4" version and up to 2900 l/min for the 3/8" and 1/2" sizes, measured at 6 bar inlet pressure with a Δp of 1 bar. Engineered to withstand supply pressures up to 18 bar and operating temperatures up to +50°C, the V3V valve combines durability, precision, and user-friendly operation. Its robust construction and optimized flow capacity make it a perfect choice for industries seeking reliable shut-off solutions that enhance both safety and productivity.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe SKILLAIR® V3V electric shut-off valve with end plates is a reliable three-way, normally closed solution designed to ensure maximum safety and efficiency in pneumatic systems. In its closed position, it not only isolates the supply air but also vents the system, making it an ideal choice for maintenance operations where secure and quick depressurization is essential. Available in sizes 100 and 200, the valve operates with supply pressures up to 10 bar and withstands temperatures up to +50°C, ensuring durability even in demanding environments. With connection options ranging from GW BSP 1/4" to 3/8" and an impressive flow rate of 1650 l/min at 6 bar inlet pressure (Δp = 1 bar), it guarantees optimal performance and flexibility for a wide range of industrial applications. This compact and robust component is engineered to deliver reliability, safety, and efficiency, making it a valuable addition to any modern pneumatic system.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe SKILLAIR® V3V manual shut-off valve with lock and end plates is a reliable solution designed to ensure maximum safety and efficiency in pneumatic systems. This three-way, normally closed valve effectively isolates the working system from the supply air, while simultaneously venting the circuit when in the closed position, making it an ideal choice for maintenance operations. Its lockable design allows the valve to be secured with a padlock in the resting position, preventing accidental or unauthorized activation and guaranteeing compliance with safety standards. Available in sizes 100, 200, and 300, the valve supports supply pressures of up to 15 bar, depending on the selected size, and operates at temperatures up to +50°C. With a nominal flow capacity reaching up to 4700 l/min at 6 bar inlet pressure (Δp = 1 bar), it ensures reliable performance across a wide range of industrial applications. Combining robust construction with user-friendly operation, the SKILLAIR® V3V valve provides a dependable and secure solution for controlling compressed air systems, offering both operational efficiency and enhanced workplace safety.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe GS series precision pressure reducing valves with quick venting are engineered to deliver maximum accuracy and reliability in pneumatic systems, ensuring a stable set pressure while instantly releasing any excess. Designed for demanding applications such as actuators with reduced friction coefficients or pneumatic springs with constant characteristics, these valves guarantee exceptional performance where precision is critical. Their innovative construction with two identical, opposing regulating valves—separately managing supply and outlet connections—provides both high flow capacity during aeration and venting, as well as outstanding setting accuracy. Easy to integrate into various systems, the valves can be mounted directly through body holes or with dedicated brackets, offering flexible installation options. With output pressure ranges of 0–2, 0–4, and 0–8 bar, supply pressure up to 10 bar, and sensitivity of just 30 mbar, they ensure precise control even in the most delicate processes. Operating with filtered, non-lubricated compressed air, they are suitable for temperatures from -10°C to +50°C, making them versatile across multiple environments. Available with BSP 1/8" and 1/4" connections, including an additional port for a pressure gauge, the GS series delivers impressive flow rates of 1200 l/min (1/8") and 1380 l/min (1/4") at 6 bar input pressure, ensuring efficiency, durability, and consistent performance in every application.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe RP piston-type pressure reducing valve is a robust solution designed to perform reliably even in demanding environments, making it an excellent choice for modern industrial applications. Controlled remotely by an external pilot, it ensures precise regulation of output pressure, fully adaptable to system requirements. As part of the innovative NEW DEAL series, this valve combines durability with flexibility, offering easy wall mounting through dedicated body holes. Available in sizes 3/8" and 1/2", it supports supply pressures up to 18 bar and operates efficiently at temperatures up to +50°C. With BSP female thread connections (3/8", 1/2") and an additional 1/8" BSP port for a pressure gauge, it guarantees straightforward installation and monitoring. Delivering an impressive flow rate of 4500 l/min at 6 bar input pressure (Δp = 1 bar), the RP valve provides consistent performance, making it the ideal choice for systems where reliability, precision, and efficiency are essential.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe high-pressure piston-type pressure reducing valve with integrated manometer is a reliable solution designed to maintain stable working pressure and guarantee optimal performance of connected systems, even under fluctuating medium consumption. With a compact DN12 size and durable brass housing, it ensures long-lasting resistance to demanding operating conditions. The valve offers a wide range of adjustable output pressures from 0.5 to 50 bar, depending on the selected version, while handling supply pressures up to 60 bar. Suitable for operating temperatures between -10°C and +90°C, it provides versatility across various industrial applications. Equipped with BSP 1/4" or 3/8" connections and a clear Ø63 manometer dial, it allows precise monitoring and easy installation. Delivering high flow rates of up to 2000 l/min for 1/4" and 2500 l/min for 3/8" connections at 20 bar input pressure (Δp = 4 bar), this valve combines efficiency, safety, and performance, making it an excellent choice for professionals seeking reliable pressure control in high-demand environments.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe REG pressure reducing valve from the SKILLAIR® series, designed without end plates, ensures precise regulation of operating pressure, guaranteeing reliable performance and protection of connected devices. Available in sizes 100, 200, and 300, it offers a wide range of output pressures from 0–2, 0–4, 0–8, up to 0–12 bar, with a maximum supply pressure of 15 bar (13 bar for sizes 200 and 300). Engineered for versatility, it operates efficiently at temperatures up to +50°C and provides flexible installation options with BSP connections from 1/4" to 1", as well as a BSP 1/8" port for pressure gauge integration. Delivering outstanding flow capacity, the valve achieves 1600 l/min in size 100, 3500 l/min in size 200, and up to 7000 l/min in size 300 at 6 bar input pressure with a 1 bar pressure drop. Combining durability, precision, and high performance, the SKILLAIR® REG valve is the ideal solution for applications requiring stable pressure control, optimized energy efficiency, and long-lasting reliability in demanding pneumatic systems.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe REG series regulating valve with lock is a robust and reliable solution designed for demanding industrial environments, perfectly suited for the NEW DEAL line of equipment. Its durable piston construction ensures long-lasting performance even under harsh working conditions, while the option of wall mounting through body-integrated holes provides flexibility and convenience during installation. The valve is equipped with a specially designed stem featuring a hole in the upper part of the adjustment knob, allowing the use of a padlock to secure the settings and eliminate the risk of unauthorized changes. Each set is supplied with a padlock and two keys, ensuring immediate readiness for safe operation. Available in sizes 3/8" and 1/2", the valve offers adjustable output pressure ranges of 0–4, 0–8, or 0–12 bar, with a maximum supply pressure of up to 18 bar and an operating temperature of up to +50°C. Connections include GW BSP 3/8" or 1/2" for input/output and GW BSP 1/8" for the pressure gauge, ensuring compatibility with standard systems. With an impressive flow capacity of 2500 l/min at 6 bar input pressure (Δp = 1 bar), this regulating valve guarantees efficiency, precision, and safety, making it an excellent choice for professionals seeking reliable control in pneumatic applications.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe REG pressure reducing valve from the SYNTESI® series is a high-performance solution designed to ensure stable and precise regulation of working pressure, guaranteeing reliable operation of pneumatic systems regardless of fluctuating medium consumption. Its innovative shaped diaphragm, offering a longer stroke than traditional flat diaphragms, delivers higher nominal flow rates, exceptional sensitivity, and faster response to pressure adjustments, while minimizing friction for maximum accuracy. The practical “push-lock” mechanism secures the knob in any position, and the integrated locking plate allows the use of a padlock to prevent unauthorized changes. With front and rear air connections, the valve enables easy integration of pressure gauges, pneumatic-electric relays, or plug couplings, while the direct input-output configuration supports the installation of multiple valves side by side, each independently adjustable from a single supply source. Available in sizes SY1 and SY2, the valve offers output pressure ranges of 0–2, 0–4, 0–8, and 0–12 bar, with supply pressures up to 15 bar depending on size, and operating temperatures from -10°C to +50°C. Additional connection options include BSP 1/8" for SY1 and BSP 1/4" for SY2, with flow capacities of 500 l/min and 1000 l/min respectively (at 6 bar input pressure, Δp = 1 bar), making it a versatile and efficient choice for demanding pneumatic applications.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe REG Series SKILLAIR® pressure reducing valves, size 100, are designed to deliver precise control of working pressure, ensuring reliable performance of pneumatic systems and devices. Built without end plates, they can be easily installed in series, all supplied with the same inlet pressure, while each valve allows for an independent outlet pressure adjustment, offering maximum flexibility in complex setups. The outlet air is conveniently taken from the 1/8” pressure gauge connection, making monitoring straightforward. With an adjustable output pressure range of 0–2, 0–4, 0–8, or 0–12 bar, and a supply pressure capacity of up to 15 bar, these valves guarantee adaptability to diverse industrial requirements. Operating efficiently at temperatures up to +50°C, they ensure durability and consistent performance even in demanding environments. Featuring a GW BSP 1/8" pressure gauge connection and a flow rate of 950 l/min at 6 bar input pressure with Δp = 1 bar, the REG Series valves combine compact design with high efficiency, making them an ideal choice for applications requiring precision, reliability, and optimized air management.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe REG pressure reducing valves from the SKILLAIR® series with end plates are designed to deliver precise control of working pressure, ensuring reliable performance of connected equipment. Thanks to their modular design, they can be installed in series and supplied with the same inlet pressure, while each valve allows for an independent outlet pressure adjustment, providing maximum flexibility in complex pneumatic systems. The outlet air is conveniently taken from the 1/8” pressure gauge connection, making monitoring simple and efficient. With a compact size of 100, these valves offer a wide output pressure range of 0–2, 0–4, 0–8, or 0–12 bar, and can handle supply pressures up to 15 bar. Engineered for durability, they operate flawlessly at temperatures up to +50°C and feature BSP connections of 1/4" or 3/8", with a pressure gauge port of BSP 1/8". Delivering a high flow rate of 950 l/min at 6 bar inlet pressure (Δp = 1 bar), they combine efficiency with versatility, making them an ideal solution for demanding industrial applications where precision and reliability are essential.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe SKILLAIR® Set F + D series is a highly reliable solution designed to ensure maximum purity of compressed air, combining a robust filter with a precision fine filter for superior performance. Engineered to effectively eliminate both liquid and solid impurities, the system guarantees clean and safe air supply for demanding industrial applications. Available in sizes 100, 200, and 300, the units operate at supply pressures up to 15 bar, depending on the model and discharge type. With a filtration capacity of 5 µm for the standard filter and an impressive 99.97% efficiency at 0.01 µm for the fine filter, the set delivers exceptional air quality. Flexible connection options from GW BSP 1/4" to 1" ensure easy integration into existing systems, while condensate discharge can be selected as manual, semi-automatic (RMSA), or fully automatic (SAC, RA) to match operational needs. Designed for reliability even in intensive use, the system operates at temperatures up to +50°C, making it the ideal choice for industries that demand consistent performance, reduced downtime, and long-term efficiency.
