Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRegulator MR series BIT. A basic version for regulating compressed-air pressure in a pneumatic installation. Pressure gauge connection: 1/8" BSP female. Output pressure range: 0 ÷ 2 bar, 0 ÷ 4 bar, 0 ÷ 8 bar or 0 ÷ 12 bar. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve reducing high-pressure type piston with pressure gauge, serves for regulation pressure working and ensures correct operation in connected za nim installation, independently od changing wear medium. Size: DN20. Material housing: brass. Output pressure range: 0.5÷12, 1÷20, 2÷35, 3÷50 bar. Supply pressure: up to 60 bar. Operating temperature: od -10°C up to +90°C. Connection: 1" BSP female. Diameter disc pressure gauge: Ø63. Flow rate: 5000 l/min (at an inlet pressure of 20 bar Δp = 4 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve reducing REG type piston, is characterized resistance on heavy conditions use, intended for series NEW DEAL. Possibility of wall mounting via holes in the body. Size: 1/4", 3/8", 1/2", 3/4", 1". Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 18 bar. Operating temperature: up to +50°C. Connection: 1/4" BSP female, 3/8", 1/2", 3/4", 1". Pressure gauge connection: 1/8" BSP female for valve for 1/2" (above - 1/4" BSP female). Flow rate: 650 l/min - 1/4", 2500 l/min - 3/8", 1/2", 4500 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with reducer series NEW DEAL type piston o high degree reliability, intended for compressed-air systems or in the immediate vicinity of actuating devices. Possibility of wall mounting via holes in the body. Size: 1/4", 3/8", 1/2". Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 18 bar, for trigger RA up to 10 bar. Operating temperature: up to +50°C. Connection: 1/4" BSP female, 3/8", 1/2". Pressure gauge connection: 1/8" BSP female. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 700 l/min - 1/4", 2500 l/min - 3/8", 1/2" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with reducer (filter-regulator) series SYNTESI®, without end connections, is a device consisting of a filter and a reducing valve. built is with these same components co Filter and reducer, so has such same features technical. It reduces and purifies the air supplied by the compressor. Size: SY1, SY2. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: up to +50°C. Connection: 1/8" BSP female ÷ 3/8" for SY1 and 3/8" BSP female ÷ 1" for SY2. Additional connection for a pressure gauge or fittings: 1/8" BSP female for SY1 and 1/4" for SY2. Condensate drain: manual / semi-automatic (RMSA), automatic (RA). Flow rate: 1300 l/min - 1/8", 2000 l/min - 1/4", 3000 l/min - 3/8" (SY1), 5800 l/min - 3/8" (SY2), 7200 l/min - 1/2", 7400 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with reducer series BIT with diaphragm shaped, recommended for decentralised compressed-air systems or in the immediate vicinity of actuating devices. Size: 1/8", 1/4". Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Filtration grade: 5 µm, 20 µm, 50 µm. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Connection: 1/8" BSP female, 1/4" BSP female. Pressure gauge connection: 1/8" BSP female. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 600 l/min - 1/8", 1/4" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet FR + L series NEW DEAL o high degree reliability for heavy conditions use, with reducer type piston. is characterized stability pressure set at variable pressure supply, micrometric regulation doses lubrication proportional for flow air, guaranteed work at low values flow. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 18 bar, for trigger RA up to 10 bar. Operating temperature: up to +50°C. Connection: 1/4" BSP female, 3/8", 1/2". Connection pressure-gauge: 1/8" BSP female. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 500 l/min - 1/4", 2200 l/min - 3/8", 1/2" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter - reducer GAFR series GA with thread internal BSP serves for removing contaminants contained in compressed air in order to correct use element systems pneumatic, a set manually reducer stays constant value pressure at the outlet, independently od fluctuations pressure supply. W set found angle bracket/A handle assembly and pressure gauge. Do connecting individual element of each other, serve sets connecting GA (shape L, T, U). Size: 200, 300, 400, 600. Filtration grade: 40 µm. Supply pressure: up to 10 bar. Operating temperature: od -5°C up to +70°C. Connection: 1/8" BSP female ÷ 1". Condensate drain: automatic (A). Flow rate: 1050 l/min - size 200, 2250 l/min - size 300, 4000 l/min - size 400, 6500 l/min - size 600 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter FIL series SKILLAIR®, without plates end, serves for accurate removal contaminants liquid and solid, contained in compressed air. Size: 400. Filtration grade: 5 µm, 20 µm, 50 µm. Supply pressure: up to 13 bar, depending on kinds trigger. Operating temperature: up to +50°C. Connection: 1" BSP female ÷ 2". Condensate drain: manual / semi-automatic (RMSA), automatic (RA).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with reducer (filter-regulator) series SYNTESI®, with end connections 1/8", 1/4", 3/8", 1/2", 3/4", 1", is a device consisting of a filter and a reducing valve. built is with these same components co Filter and reducer, so has such same features technical. It reduces and purifies the air supplied by the compressor. Size: SY1, SY2. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: od -10°C up to +50°C. Connection: 1/8" BSP female ÷ 3/8" for SY1 and 3/8" BSP female ÷ 1" for SY2. Additional connection for a pressure gauge or fittings: 1/8" BSP female for SY1 and 1/4" for SY2. Condensate drain: manual / semi-automatic (RMSA), automatic (RA). Flow rate: 1300 l/min - 1/8", 2000 l/min - 1/4", 3000 l/min - 3/8" (SY1), 5800 l/min - 3/8" (SY2), 7200 l/min - 1/2", 7400 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve reducing REG, series SYNTESI®, without end connections, serves for regulation pressure working and ensures correct operation, in connected za nim installation, independently od changing sie wear medium. W a valve used instead of diaphragm flat diaphragm shaped, which ensures greater value flow nominal thanks to greater surge diaphragm, greater sensitivity and speed reaction on change setting, thanks to reduction friction static and kinetic components and greater accuracy in maintaining set pressure output at change value flow and pressure supply. W case rise pressure output over value setting diaphragm opens valve trigger and vents reducer until for obtaining value pressure compliant with setting. mechanism type „push-lock” allows on locking a knob in any position through its pressing. Plate locking allows mounting padlock protective against unauthorised change setting pressure output. additional the connection with the front and with the back of size 1/8” can be used for connection pressure gauge, relay pneumo-electric or fittings push-in. drawn with these connections air is reduced. Size: SY1, SY2. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: od -10°C up to +50°C. Connection: 1/8" BSP female ÷ 3/8" for SY1 and 3/8" BSP female ÷ 1" for SY2. Additional connection for a pressure gauge or fittings: 1/8" BSP female for SY1 and 1/4" for SY2. Flow rate: 1200 l/min - 1/8", 2800 l/min - 1/4", 3350 l/min - 3/8" (SY1), 5300 l/min - 3/8" (SY2), 7400 l/min - 1/2", 7600 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducer GAR series GA with thread internal BSP, set manually, stays constant value pressure at the outlet, independently od fluctuations pressure against valve. W set found A handle assembly and pressure gauge. Do connecting individual element of each other, serve sets connecting GA (shape L, T, U). Size: 200, 300, 400, 600. Supply pressure: up to 10 bar. Operating temperature: od -20°C up to +70°C. Connection: 1/8" BSP female ÷ 1". Flow rate: 1400 l/min - size 200, 2100 l/min - size 300, 5000 l/min - 400, 6800 l/min - 600 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet FR+L to connection filter-regulator and lubricator. Filter - reducer consists of standard filter air and valve reducing built-in in one housing. task filter is separation heavier fraction contaminants air using force centrifugal, whereas valve reducing, thanks to diaphragm shaped ensuring maximum sensitivity and precision setting. has additional the connection with the front and with the back enabling connection pressure gauge or fittings for pressure reduced. Grease nipple to most widely used solution ensuring correct lubrication equipment actuating in installations pneumatic. On jej rear and front surface is found also the connection auxiliary for connection pressure gauge, sensor pressure or for additional draw air. Size: SY1, SY2. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 15 bar for SY1, up to 13 bar for SY2, up to 10 bar for trigger RA. Operating temperature: od -10°C up to +50°C. Connection: 1/8" BSP female ÷ 3/8" for SY1 and 3/8" BSP female ÷ 1" for SY2. Filtration grade: 5 µm, 20 µm, 50 µm. capacity bowl oil: 60 cmcm³ - SY1, 130 cm³ - SY2. Additional connection for a pressure gauge or fittings: 1/8" BSP female for SY1 and 1/4" for SY2. Condensate drain: manual /semi-automatic (RMSA), automatic (RA). Flow rate: 1400 l/min - SY1, 4000 l/min - SY2, (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with reducer (filter-regulator) FR, series SKILLAIR®, without plates end, is a device consisting of a filter and a reducing valve. It reduces and purifies the air supplied by the compressor. Size: 100, 200, 300. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar, depending on size and kinds trigger. Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1". Pressure gauge connection: 1/8" BSP female. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 1600 l/min - series 100, 3000 l/min - series 200, 5600 l/min - series 300 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRegulator MRA series BIT. A version used for regulating pressure in water installations, without secondary venting. Pressure gauge connection: 1/8" BSP female. Output pressure range: 0 ÷ 2 bar, 0 ÷ 4 bar or 0 ÷ 12 bar. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease nipple (lubricator) series NEW DEAL with connection BSP female, ensures correctness lubrication mist oil equipment in installations pneumatic and is characterized high stability dosing. Supply pressure: up to 18 bar. Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter FIL series NEW DEAL recommended for decentralised compressed-air systems or in the immediate vicinity of actuating devices. Thanks to its construction (metal construction) it is characterised by resistance to heavy-duty operating conditions. Intended for use at higher pressures. Size: 1/4", 3/8", 1/2", 3/4", 1". Filtration grade: 4 µm, 20 µm, 50 µm. Supply pressure: up to 18 bar, for trigger RA up to 10 bar. Operating temperature: up to +50°C. Connection: 1/4" BSP female, 3/8", 1/2", 3/4", 1". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 1700 l/min - 1/4", 4100 l/min - 3/8", 1/2", 11000 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve reducing REG, series SYNTESI®, with end connections 1/8" ÷ 1", serves for regulation pressure working and maintaining go on fixed level, ensuring correct operation, in connected za nim installation, independently od changing sie wear medium. W a valve used instead of diaphragm flat, diaphragm shaped, which ensures greater value flow nominal thanks to greater surge diaphragm, as well as greater sensitivity and speed reaction on change setting, through reduction friction static and kinetic components and greater accuracy in maintaining set pressure output at change value flow and pressure supply. W case rise pressure output over value setting diaphragm opens valve trigger and vents reducer until for obtaining value pressure compliant with setting. mechanism type „push-lock” allows on locking a knob in any position through its pressing. Plate locking allows mounting padlock protective against unauthorised change setting pressure output. additional the connection with the front and with the back, can be used for connection pressure gauge, relay pneumo-electric or fittings push-in. drawn with these connections air is reduced. Size: SY1, SY2. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar, depending on size. Operating temperature: od -10°C up to +50°C. Connection: 1/8" BSP female ÷ 1". Additional connection for a pressure gauge or fittings: 1/8" BSP female for size SY1, 1/4" BSP female for size SY2. Flow rate: 1200 l/min - 1/8", 2800 l/min - 1/4", 3350 l/min - 3/8" (SY1), 5300 l/min - 3/8" (SY2), 7400 l/min - 1/2", 7600 l/min - 3/4" and 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with reducer (filter-regulator) FR, series SKILLAIR®, is a device consisting of a filter and a reducing valve. It reduces and purifies the air supplied by the compressor. Size: 300. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 13 bar, depending on kinds trigger. Operating temperature: up to +50°C. Connection: 1/2" BSP female ÷ 1". Pressure gauge connection: 1/8" BSP female. Condensate drain: manual / semi-automatic (RMSA), automatic (RA, SAC). Flow rate: 5600 l/min at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic trigger condensate series NEW DEAL. Working pressure: 10 bar. Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease nipple compressed air series BIT with connection BSP female ensures correctness lubrication mist oil equipment in installations pneumatic and is characterized high stability lubrication. especially recommended for use at low values flow. Size: 1/8", 1/4". capacity bowl: 26.5 cm³. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Connection: 1/8" BSP female, 1/4". Flow rate: 710 l/min - 1/8", 1/4" (at an inlet pressure of 6 bar and Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off V3V manual with a lock, series SKILLAIR®, without plates end. task its is separation the system working od air supply. is to valve normally closed, three-way. W position closed cuts off air supply simultaneously venting configuration, co makes go especially useful during work service. W position rest (closed) can be closed on a padlock co secures valve against switching on through unauthorised persons. Size: 100, 200, 300. Supply pressure: up to 15 bar (depending on size). Operating temperature: up to +50°C. Flow rate nominal: depending on size for 4700 l/min (at an inlet pressure of 6 bar Δp = 1 bar).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter accurate DEP series SYNTESI®, without connections end, serves for removal with high accuracy contaminants liquid or solid, contained in compressed air. high accuracy filtration obtained is through use special element filtering called „an insert coalescing”. Size: SY1, SY2. Filtration grade: 0.01 µm - Class purity air acc. to ISO 8573-1: 1-7-2. Supply pressure: up to 15 bar - size SY1, up to 13 bar - size SY2. Operating temperature: od -10°C up to +50°C. Condensate drain: manual / semi-automatic (RMSA). Flow rate recommended: 460 l/min - size SY1, 620 l/min - size SY2 (at pressure 6.3 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter FIL series BIT recommended for decentralised compressed-air systems or in the immediate vicinity of actuating devices. Size: 1/8", 1/4". Filtration grade: 5 µm, 20 µm, 50 µm. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 1200 l/min - 1/8", 1/4" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off Controlled manually V3V series SYNTESI®, without end connections, serves for separation the system working od air supply. is to valve three-way, two-position, normally closed. W position closed cuts off air supply and vents configuration, co makes go especially useful at performing work service. has configuration allowing on mounting dwu in size SY1 or three in size SY2 padlocks o diameter 3 mm. alternatively Available is version with a hole Ø 7 for single padlock. On rear and front surface valve is found the connection auxiliary (1/8” for rate SY1 and 1/4” for size SY2) for connection pressure gauge, sensor pressure or for additional draw air. Size: SY1, SY2. Connection: 1/8" BSP female, 1/4", with the front and with the back. Supply pressure: up to 15 bar, depending on size. Operating temperature: od -10°C up to +50°C. Flow rate nominal: for 4000 l/min, depending on size (at an inlet pressure of 6 bar and Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRelay pneumo-electric 2A NO/NC 2 MT (version with two-metre line). Supply pressure: up to 15 bar. Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini reducer SDR series G with thread internal BSP, set manually, stays constant value pressure at the outlet, independently od fluctuations pressure against valve. W set found A handle assembly and pressure gauge. Size: 100, 200. Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Connection: M5 BSP female ÷ 1/4". Flow rate: 150 l/min - size 100, 500 l/min - size 200 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease nipple GAL series GA with thread internal BSP ensures correctness lubrication mist oil equipment in installations pneumatic. W set found angle bracket/A handle assembly. Do connecting individual element of each other, serve sets connecting GA (shape L, T, U). Size: 200, 300, 400, 600. Supply pressure: up to 10 bar. Operating temperature: od -5°C up to +70°C. Connection: 1/8" BSP female ÷ 1". Flow rate: 2750 l/min - size 200, 5000 l/min - size 300, 8800 l/min - size 400, 14500 l/min - size 600 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter FIL series SYNTESI® without end connections, serves for removing contaminants solid and liquid with generated through compressor air. Size: SY1, SY2. Filtration grade: 5 µm, 20 µm, 50 µm. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: up to +50°C. Connection: 1/8" BSP female ÷ 3/8" for SY1 and 3/8" BSP female ÷ 1" for SY2. Additional connection for a pressure gauge or fittings: 1/8" BSP female for SY1 and 1/4" for SY2. Condensate drain: manual / semi-automatic (RMSA), automatic float (RA). Flow rate: 1300 l/min - 1/8", 1650 l/min - 1/4", 1750 l/min - 3/8" (SY1), 4500 l/min - 3/8" (SY2), 5200 l/min - 1/2", 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRegulator MR SR, series BIT. version used, when po a drop pressure supply required is fast venting the system pneumatic. reducer SR should mount between valve switching on a space use. Pressure gauge connection: 1/8" BSP female. Output pressure range: 0 ÷ 2 bar, 0 ÷ 4 bar, 0 ÷ 8 bar or 0 ÷ 12 bar. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve reducing REG, series SKILLAIR®, without plates end, serves for regulation pressure working, ensuring correct operation devices. Size: 100, 200, 300. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar (13 bar - series 300). Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1". Pressure gauge connection: 1/8" BSP female. Flow rate: 1600 l/min - size 100, 3500 l/min - size 200, 7000 l/min - size 300 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet FR + L series BIT with diaphragm shaped. is characterized high value flow at reduced a drop pressure, high degree separation condensate, the possibility use at low values flow. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease nipple (lubricator) series SYNTESI®, without end connections, ensures correctness lubrication mist oil equipment in installations pneumatic. version standard (STD), filling oil through plug replenishment oil. Size: SY1, SY2. capacity bowl: 60 cm³ - SY1, 130 cm³ - SY2. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: od -10°C up to +50°C. Connection: 1/8" BSP female ÷ 3/8" for SY1 and 3/8" BSP female ÷ 1" for SY2. Flow rate: 1600 l/min - 1/8", 3000 l/min - 1/4", 3650 l/min - 3/8", 6100 l/min - 1/2", 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve reducing REG, series SKILLAIR®, with plates end, serves for regulation pressure working, ensuring correct operation devices. Size: 100, 200, 300. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar (13 bar - size 300). Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1". Pressure gauge connection: 1/8" BSP female. Flow rate: 1600 l/min - size 100, 3500 l/min - size 200, 7000 l/min - size 300 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet VFR + L series NEW DEAL o high degree reliability with valve reducing type piston, consists with valve shut-off, filter air, valve reducing and lubricator. intended is for use in heavy conditions, guaranteeing at this stability pressure set at variable pressure supply and operation at low values flow. valve V3V allows quickly aerate and vent configuration. Connection: 1/4" BSP female, 3/8", 1/2", 3/4", 1". Supply pressure: up to 18 bar, for trigger RA up to 10 bar. range pressure output: 0÷8, 0÷12 bar. Filtration grade: 4 µm, 20 µm, 50 µm. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Connection pressure-gauge: 1/8" BSP female. Operating temperature: up to +50°C. Flow rate nominal: 480 l/min - 1/4", 1900 l/min - 3/8", 1/2" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter GAF series GA with thread internal BSP serves for removing contaminants contained in compressed air in order to correct use element systems pneumatic. W set found A handle assembly. Do connecting individual element of each other, serve sets connecting GA (shape L, T, U). Size: 200, 300, 400, 600. Filtration grade: 40 µm. Supply pressure: up to 10 bar. Operating temperature: od -5°C up to +70°C. Connection: 1/8" BSP female ÷ 1". Condensate drain: automatic (A). Flow rate: 1700 l/min - size 200, 3000 l/min - size 300, 4500 l/min - size 400, 10500 l/min - size 600 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with reducer (filter-regulator) FR, series SKILLAIR®, is a device consisting of a filter and a reducing valve. It reduces and purifies the air supplied by the compressor. Size: 100, 200. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar, depending on size. Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1/2". Pressure gauge connection: 1/8" BSP female. Condensate drain: manual / semi-automatic (RMSA), automatic (RA, SAC). Flow rate: for 3000 l/min at an inlet pressure of 6 bar Δp = 1 bar), depending on size.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter D series SKILLAIR®, without plates end, serves for removal with high accuracy contaminants liquid and solid, contained in compressed air. Size: 100, 200, 300. Filtration grade: 99.97% at 0.01 µm. Supply pressure: up to 15 bar, depending on size and kinds trigger. Operating temperature: up to +50°C. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 230 l/min - size 100, 360 l/min - size 200, 500 l/min - size 300 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with carbon active AC series SYNTESI®, without end connections, serves for cleaning compressed air with residue oil, solvents and odors. purification occurs due to flow air through porous granulate carbon active o high absorption contaminants. is to most effective method purification air used in industrial installations pneumatic. efficiency and service life the insert filtration can increase preceding go filter accurate (0.01µm) and filter preliminary (5µm). Size: SY1, SY2. residue oil at 20°C: 0.003 mg/m 3 – Class purity air acc. to ISO 8573-1: 1-7-1 (at difference pressure not exceeding 75 mbar). service life the insert: 4000 hours (at difference pressure not exceeding 75 mbar). Supply pressure: up to 15 bar - size SY1, up to 13 bar - size SY2. Operating temperature: od -10°C up to +50°C. Condensate drain: manual / semi-automatic (RMSA). Flow rate recommended: 350 l/min - size SY1, 800 l/min - size SY2 (at pressure 6.3 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease nipple (lubricator) series SKILLAIR®, without plates end, ensures correctness lubrication mist oil equipment in installations pneumatic. Size: 100, 200, 300. capacity bowl: 50 cm³ - size 100, 95 cm³ - size 200, 160 cm³ - size 300. Supply pressure: up to 15 bar (13 bar - size 200, 300). Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1". Flow rate: 1500 l/min - size 100, 3700 l/min - size 200, 5500 l/min - size 300 (at an inlet pressure of 6 bar and Δp = 1 bar). way filling oil: STD - version standard, filling through disassembly bowl or plug, CA - filling Automatic, replenishment only during use lubricator, CD - filling vacuum, drop pressure inside bowl allows its filling, CAML - filling Automatic with level minimum, CDML - filling vacuum with level minimum.
