0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -55 — 0

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 50 — 150

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose o calibrated diameter outer, intended for installation pneumatic, hydraulic, oil, fuel, lubrication and chemicals. compliant with the standard DIN 73378. Available in colours: natural, blue. Hose material: polyamide PA 12 (nylon). Working pressure: from 11 bar to 40 bar, depending on the diameter and wall thickness wall hose. Operating temperature: od -10°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Very flexible, resistant to abrasion, rupture and kinking spiral hose intended for installation pneumatic automotive systems brake. resistant to oil, gasoline, ozone and radiation UV. retains high flexibility at low temperatures. terminated on both sides fitting with thread external metric. The stated total length is the maximum hose length after stretching. Available in colour yellow and red. Hose material: polyurethane. Material spring: steel galvanised. The permissible Working pressure: 10 bar. Operating temperature: od -40°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Set connection, system SYNTESI

          Accessories for FRL | All products
          0 €
          Set connection for system SYNTESI type SY1 or SY2. W set occurs connector and 4 screws.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-on with thread internal type C2 intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-in straight of couplings push-in for hose o diameter metric, series S, type PUCM. economical solution for connecting flexible hoses pneumatic o metric calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A coil 22 mm for valves PIV.I, stem Ø8

          All products | Equipment for pneumatic valves
          0 €
          A coil 22 mm for valves PIV.I, stem Ø8. Insulation class: F155. Voltage tolerance: -10% for +10%. Protection degree: IP65 EN60529 with a connector. Compliant with ATEX 94/9 CE, group II, category 3GD.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plug brass nickel-plated with male thread, type A7

          All products | Threaded pneumatic fittings
          0 €
          Bolt closing with thread external BSP type A7 with head under wrench Allen. Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Spigot with thread external for system SPEEDFIT used in installations compressed air. The installation can be made with use pipes with plastic or metal (copper, brass, aluminum). pushing spigot in coupling obtain possibility connecting for installation thread internal. Material: plastic plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Mini actuator double-acting operation ISO 6432 STD, type 112 with magnet, without cushioning. has been designed for use with filtered air oiled or not oiled and not requires additional operations maintenance. Do make actuator used sleeve of steel stainless. reduced dimensions external covers some diameters, co allows assembly actuators in difficult and confined spaces. service life actuators with seals NBR is 15 million cycles, with polyurethane 30 million cycles. The presented value not should be treated as binding or guaranteed, a only as reference Due to variability many agents, including loads radial and axial, speed, temperature, czy losses air (value limit). Piston diameter: Ø 8, 10, 12, 16, 20 and 25 mm. stroke working: od 5 for 500 mm. Working pressure: od 0.8 up to 10 bar (Ø 8, 10, 12 mm); od 0.6 up to 10 bar (Ø 16, 20, 25 mm). sealing: polyurethane, NBR, FKM/FPM. Operating temperature: od -10°C up to +150°C depending on used seal.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Nipple reducing of steel stainless type 62020 with thread external BSPT. Material: steel AISI 316L. Operating temperature: od -20°C up to +225°C. Working pressure: 140 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A blade for shears PZG28

          All products | Pneumatic hoses
          0 €
          A blade spare for shears PZG28 (ZC-PZG28).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bolt double BANJO, type D8

          All products | Banjo fittings
          0 €
          Bolt double BANJO with washer type D8 for coupling type R13, R14, D12, D17, D5, D6. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tee plug-in "T" through-flow, type R5, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose o excellent resistance temperature and strength on elevated pressure made of special, non-flammable polymer. has calibrated diameter external. Material is resistant to aging and action radiation UV, characterised good properties sliding co counteracts abrasion material. Material impermeable for gases, resistant to action greater concentrated bases and acids inorganic, organic, alcohols and solvents in elevated temperatures. has properties electrical-insulating. calibrated Diameter outer allows connection with plugs or couplings leading manufacturers. accuracy dimensional ensures constant strength on compression even for hoses with greater diameter makes, that is suitable for wider range practical applications. Hose material: polyfluoride vinylidene PVDF. Working pressure: from 16 bar to 80 bar (depending on the diameter hose). Operating temperature: od -50°C up to +140°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Polyurethane hose spiral intended for pneumatic systems control, tools hand, robots industrial, etc. resistant to abrasion, breaking and kinking, with success used also in industry automotive. its high flexibility maintained is even po many years use. terminated on both sides straight sections o length 100 mm and 500 mm and fitting with thread external BSPT (without springs for diameter outer 16 mm). The stated total length is the maximum hose length after stretching. Hose material: blue polyurethane PUR. Working pressure: up to 17 bar (depending on the diameter hose). Operating temperature: od -40°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V3V L two-position three-way, with venting the system pneumatic, in version ended on both sides couplings push-in (line - line). Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Set plates end, system SKILLAIR

          Accessories for FRL | All products
          0 €
          Set plates end for system SKILLAIR, series 100, 200, 300 or 400.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling bulkhead type B4 with a ring cutting Intended for connecting pipes copper and hoses with plastics. W case connecting with hoses recommended is use ferrule reinforcing (B12). Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-on angled 90° type C6 intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Elbow through-flow, series F type R 4 NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: brass nickel-plated. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality coupling straight, made entirely of steel AISI 316L, series 60040. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Adapter for pressure gauge 1/4″- 1/8″

          Accessories for FRL | All products
          0 €
          Adapter enabling connection pressure gauge with thread 1/8" for coupling 1/4", O-ring. Material: steel carbon. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bar assembly for hoses pneumatic KK

          All products | Pneumatic hoses
          0 €
          Bar assembly for hoses pneumatic. facilitates and speeds up design installation, reduces space installation, increases resistance to vibration. color: blue.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Mini actuator double-acting operation ISO 6432 STD, type 113, has been designed for use with filtered air oiled or not oiled and not requires additional operations maintenance. Do make actuator used sleeve of steel stainless. reduced dimensions external covers some diameters, co allows assembly actuators in difficult and confined spaces. service life actuators with seals NBR is 15 million cycles, with polyurethane 30 million cycles. The presented value not should be treated as binding or guaranteed, a only as reference Due to variability many agents, including loads radial and axial, speed, temperature, czy losses air (value limit). Piston diameter: Ø 16, 20 and 25 mm. stroke working: od 10 for 500 mm. Working pressure: od 0.6 up to 10 bar. sealing: polyurethane, NBR. Operating temperature: od -10°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Nipple brass nickel-plated with male thread, type A1

          All products | Threaded pneumatic fittings
          0 €
          Nipple with thread external parallel type A1, intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Bolt double BANJO with washer and thread internal type D10 for coupling type R13, R14, D12, D17, D5, D6. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Silencer MWSC with male thread, brass

          All products | Equipment for pneumatic valves
          0 €
          Silencer MWSC with thread external used in systems compressed air in order to reducing level noise. reducer noise that can obtain through assembly silencer, measured at pressure supply 5 bar, in distance 1m and under angle 45° od axis silencer, is average depending on size 35 dB. Material: brass nickel-plated, bronze sintered nickel-plated. Operating temperature: od -10°C up to +80°C. Working pressure: up to 12 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tee swivel, screw-in with thread external cylindrical, series F type R 32 NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: brass nickel-plated. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tee of steel stainless type 62400 with thread internal BSP. Material: steel AISI 316L. Operating temperature: od -20°C up to +225°C. Working pressure: 140 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose pneumatic polyurethane PUR F

          All products | Pneumatic hoses
          0 €
          Light, very flexible hose used in systems, in which occurs frequent contact with water (high resistance to microorganisms and hydrolysis), detergents, solvents. Retains flexibility at low temperatures, is resistant to abrasion and kinking. The calibrated outer diameter allows use with push-in connectors. Hardness per Shore (A): 98°. Meets FDA requirements. Available in colour natural, black, blue, green, red. Hose material: polyether-polyurethane. pressure working: from 16 bar to 24 bar, depending on the diameter hose. Operating temperature: od -40°C up to +85°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Very flexible in wide the scope temperatures hose spiral, resistant to abrasion, sparks welding and hot chips metal. intended for pneumatic systems control, tools hand, robots industrial, etc. resistant to radiation UV and aging. terminated on both sides straight sections o length 100 mm and 500 mm and fitting with thread external BSPT. Hardness per Shore (A): 98°. The stated total length is the maximum hose length after stretching. Hose material: flame-retardant polyurethane PUR. Working pressure: up to 13 bar (depending on the diameter hose). Operating temperature: od -40°C up to +70°C. standards: UL 94 VO (Layer outer). color black.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check RFL L type B (Connection threaded with an O-ring with one and coupling push-in on the other side) regulates stream flowing air in obu directions. Working pressure: 10 bar. Operating temperature: od -20°C for +60° C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling angled 90° type B6 with a ring cutting intended for connecting pipes copper and hoses with plastics. W case connecting with hoses recommended is use ferrule reinforcing (B12). Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-on bulkhead type C4 intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality coupling bulkhead straight, made entirely of steel AISI 316L, series 60050. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Coupling push-in straight, type R19

          All products | Push-in fittings
          0 €
          Coupling push-in straight, type R19, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Coupling with thread external SPEEDFIT, brass

          All products | Pneumatic piping systems
          0 €
          Coupling with thread external for system SPEEDFIT used in installations compressed air. The installation can be made with use pipes with plastic or metal (copper, brass, aluminum). Material: brass. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Adapter 2-position VME1-000

          All products | Equipment for pneumatic valves
          0 €
          Adapter 2-position VME1-000 intended for mini valves VME or valves mounted in panel control with series 70.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A blade for cutter TC15

          All products | Pneumatic hoses
          0 €
          A blade spare for cutter TC15 (SH-TC15).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Bolt BANJO with washers with thread internal type D9 for coupling type R13, R14, D12, D17, D5, D6. Material: brass nickel-plated. Working pressure: 18 bar.
        Go to Top