- Home
- Pneumatics
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee "Y" with threads internal BSP type A23, intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA handle assembly for pipes in system SPEEDFIT. Material: plastic plastic.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for air, water and other media. is characterized flame retardancy and resistance on sparks welding, hot chips metal. resistant to hydrolysis, corrosion biological, radiation UV, solvents and detergents. withstands vacuum 0.9 bar. The calibrated outer diameter allows use with push-in connectors. Hose material: flame-retardant polyurethane PUR. Working pressure: 20 bar. Operating temperature: od -35°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsInsert filter for system SYNTESI type SY1 or SY2. Available in colours: yellow, white and blue in order to facilitating identification.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve check type VNR L in version ended on both sides couplings push-in (line - line), with holes for mounting wall. Working pressure: 12 bar. sealing: NBR. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection with thread internal BSP type B2 with a ring cutting intended for connecting pipes copper and hoses with plastics. W case connecting with hoses recommended is use ferrule reinforcing (B12). Material: brass nickel-plated. Working pressure: 60 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-on with thread external type C1/C intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling straight reducing of couplings push-in under hose o diameter metric, series S, type PUCM. economical solution for connecting flexible hoses pneumatic o metric calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection straight with thread internal, series F type R 2 NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: brass nickel-plated. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter thread external BSPT and thread internal BSP type A5, intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug hexagonal of steel stainless type 62320 with thread external BSP. Material: steel AISI 316L. Operating temperature: od -20°C up to +225°C. Working pressure: 140 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBar assembly for hoses pneumatic. facilitates and speeds up design installation, reduces space installation, increases resistance to vibration. Operating temperature: od 0°C up to +40°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPressure gauge with connection rear with thread external BSP, type GS40, serves for measuring pressure. range measuring should be selected appropriate for pressure use tak, to not exceed ono 75% maximum range (0 ÷ 10 bar). Operating temperature: od -20°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlastic A box the directional valve air for system SPEEDFIT with threads 5x1/2″ BSP used in installations compressed air. W set is found three plugs 1/2″. The installation can be made with use pipes with plastic or metal (copper, brass, aluminum) o diameters external od 12 mm for 28 mm). Material: plastic plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection straight with thread external and spigot, series F type R 6 NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: brass nickel-plated. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsActuator short-stroke double-acting operation, of hidden piston rod with magnet. series SSCY is characterized compact design and Intended is for mounting in confined spaces. service life working actuators without loads transverse with seals with NBR is 15 million cycles, with seals polyurethane 30 million cycles. Z notes on variability many agents having influence on service life, The presented value not should be treated as binding or guaranteed, a only as reference. available diameter piston: Ø 12 ÷ 80 mm. stroke working: od 5 for 120 mm. Material seal actuator: NBR or polyurethane. Working pressure: od 0.4 up to 10 bar - depending on the diameter piston. Operating temperature: od -10°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilencer with a throttle trigger MWSVE with thread external used in systems compressed air in order to reducing level noise. reducer noise that can obtain through assembly silencer, measured at pressure supply 5 bar, in distance 1m and under angle 45° od axis silencer, is average depending on size 25 dB. Material: brass nickel-plated, bronze sintered nickel-plated. Material spring: steel stainless. Operating temperature: od -10°C up to +80°C. Working pressure: 12 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting Tee "T" with thread external BSPT type B7 with a ring cutting Intended for connecting pipes copper and hoses with plastics. W case connecting with hoses recommended is use ferrule reinforcing (B12). Material: brass nickel-plated. Working pressure: 60 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee "T" with thread external BSPT type C7 intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose o calibrated diameter outer, intended for installation pneumatic, hydraulic, oil, fuel, lubrication and chemicals. Hose material: polyamide PA 6 (nylon). Working pressure: from 11 bar to 40 bar (depending on the diameter hose). Operating temperature: od -10°C up to +80°C. standard: DIN 73378.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in straight with thread internal, type R2, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with thread external and thread internal BSP type A4/Z, intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA coil 30 mm for valves PIV.B. Insulation class: F180. Voltage tolerance: -10% for +15%. Protection degree: IP65 EN60529 with a connector.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMicro-actuator single-acting operation (of hidden piston rod) intended for mounting in confined spaces. has ring sealing (O-ring), enabling direct assembly in body machine. possible oil-free operation. important! during when actuator works with high frequency recommended is, by piston not reached limit position. Material: brass nickel-plated (body), steel AISI 303 (piston for Ø6 - Ø10), brass (piston for Ø16), steel nickel-plated (A nut), steel spring (spring), brass (bearing sliding). Working pressure: 2÷6 bar. Operating temperature: od -10°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA nut for coupling screw-together with a ring cutting series B. Material: brass nickel-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in Tee "T" of couplings push-in for hose o diameter metric, series S, type PUTM. economical solution for connecting flexible hoses pneumatic o metric calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose o calibrated diameter outer, intended specially for installation pneumatic automotive systems brake. Not contains plasticisers, not stiffens and is resistant to radiation UV. Available only in black. standard: ISO 7628 : 2010 (category 1). Hose material: thermoplastic elastomer (TPE) based on polyester. Working pressure: 10 bar. Operating temperature: od -40°C for + 100°C (for media based on water +65°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet connection for system SKILLAIR, series 100, 200, 300 or 400.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling with pressure gauge MAN L in version ended on both sides couplings push-in (line - line). pressure gauge built-in in metal cover ensures accurate reading despite small sizes. can be directed in any direction through hand turning. Working pressure: 12 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSwivel coupling with thread external and spring protective for hoses with soft plastics. Material: brass nickel-plated. Working pressure: 18 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling reducing for system SPEEDFIT used in installations compressed air. The installation can be made with use pipes with plastic or metal (copper, brass, aluminum). Material: plastic plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-on angled 90° with thread internal type C5/F intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter thread internal BSP type A6, intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA box distribution air for system SPEEDFIT. W set is found two plugs 1/2″. Material: aluminum. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilencer dynamic MWSPL with thread external used in systems compressed air in order to reducing level noise. reducer noise that can obtain through assembly silencer, measured at pressure supply 5 bar, in distance 1m and under angle 45° od axis silencer, is average depending on size 30 dB. Material: black resin acetal, insulation acoustic. Operating temperature: od -10°C up to +60°C. Working pressure: 6 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting Tee "L" with thread external BSPT type B8 with a ring cutting Intended for connecting pipes copper and hoses with plastics. W case connecting with hoses recommended is use ferrule reinforcing (B12). Material: brass nickel-plated. Working pressure: 60 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee "L" with thread external BSPT type C8 intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose for air, gases, water and other media. used in systems in which occurs danger accumulation charges electric and in zones hazard explosion. compliant with the directive ATEX (2014/34/UE). resistance surface R 6 Ω. resistant to hydrolysis, microorganisms, abrasion and radiation UV. The calibrated outer diameter allows use with push-in connectors. recommended for applications in industry electronic, painting powder, zones hazard explosion, mining, conveyors and sorters parts. pressure working given at factor safety 2:1 relative to maximum pressure not causing damage hose. Hose material: antistatic polyurethane PUR. Working pressure: from 9 bar to 16 bar (depending on the diameter hose). Operating temperature: od -30°C up to +80°C. Vacuum: for 0.95 bar (at vacuum should increase radius bends o 20%).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsInsert filter "F" and "FR" for series NEW DEAL.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off type V3V L two-position three-way, with venting the system pneumatic, in version with connection threaded with an O-ring on one side and coupling push-in on the other side (thread - line). Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.



















































