0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -55 — 0

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 50 — 150

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling bulkhead push-in straight, type R10, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A nut for couplings socket intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Ring securing SPEEDFIT, plastic plastic

          All products | Pneumatic piping systems
          0 €
          A ring securing against unintended disconnection for system SPEEDFIT used in installations compressed air. The installation can be made with use pipes with plastic or metal (copper, brass, aluminum) o diameters external od 12 mm for 28 mm). Material: plastic plastic. Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A switch bistable 3-position VRM-313 N

          All products | Equipment for pneumatic valves
          0 €
          A switch bistable 3-position VRM-313 N with short a lever for valve VME. Do mounting required is Adapter VME1-000. color: black.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tee "Y" 2x female threadint internal BSP 1xgwint external BSPT type A24, intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tee plug-in "T" through-flow, type R22, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose o calibrated diameter outer, intended for installation pneumatic, hydraulic, oil, fuel, lubrication and chemicals. Available in colours: natural, black, blue, red, yellow. Hose material: polyamide PA 12 (nylon). Working pressure: from 19 bar to 28 bar, depending on the diameter and wall thickness wall hose. Operating temperature: od -40°C up to +80°C (for media based on water +70°C). standard: SAE J 844 (diameter od 1/8" for 5/16").
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V3V L two-position three-way, with venting the system pneumatic, in version ended on both sides couplings push-in (line - line). version closed on a padlock, secures against opening through unauthorised persons. supplied in set with padlock and two wrenches. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Set connection GA

          Accessories for FRL | All products
          0 €
          Set connection GA, serves for connecting individual element installation preparation compressed air series G. W set found connector and 2 screws. available in shape: "L", "T" and "U". Supply pressure: up to 10 bar. Operating temperature: up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Elbow with thread internal BSP type A9 intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Mini actuator double-acting operation ISO 6432 STD, type 110, without magnet, without cushioning. has been designed for use with filtered air oiled or not oiled and not requires additional operations maintenance. Do make actuator used sleeve of steel stainless. reduced dimensions external covers some diameters, co allows assembly actuators in difficult and confined spaces. service life actuators with seals NBR is 15 million cycles, with polyurethane 30 million cycles. The presented value not should be treated as binding or guaranteed, a only as reference Due to variability many agents, including loads radial and axial, speed, temperature, czy losses air (value limit). Piston diameter: Ø 8, 10, 12, 16, 20 and 25 mm. stroke working: od 5 for 500 mm. Working pressure: od 0.8 up to 10 bar (Ø 8, 10, 12 mm); od 0.6 up to 10 bar (Ø 16, 20, 25 mm). sealing: polyurethane, NBR, FKM/FPM. Operating temperature: od -10°C up to +150°C depending on used seal.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose o calibrated diameter outer, intended for installation pneumatic, hydraulic, oil, fuel, lubrication and chemicals. especially recommended for industrial or automotive installation hot liquids (fuels, oils, agents refrigerant) or air, not containing water. Available only in black. Hose material: modified polyamide PPA. Working pressure: from 10 bar to 44 bar (depending on the diameter and wall thickness wall hose). Operating temperature: od -40°C for + 150°C (for media based on water +70°C). standard: DIN 73378, ISO 7628.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Indicator pressure LAM L (line – line)

          All products | Functional fittings
          0 €
          Indicator pressure LAM L in version ended on both sides couplings push-in (line - line) serves for signalling (signal color green or orange) aeration the system; when configuration is vented to a sight glass signalling is "empty". Working pressure: 2 ÷ 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Push-in coupling elbow SPEEDFIT, plastic plastic

          All products | Pneumatic piping systems
          0 €
          Push-in coupling elbow for system SPEEDFIT used in installations compressed air. The installation can be made with use pipes with plastic or metal (copper, brass, aluminum). Material: plastic plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A sight glass control lubricator

          Accessories for FRL | All products
          0 €
          A guard lubricator CVL intended for system SKILLAR series 100-200-300-400 and series BIT.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-in angled 90° adjustable with thread external, type R34, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Shears for cutting pipes and hoses o diameter 4 ÷ 32 mm. W sale available are blade spare under index JG-TS32EK.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A switch bistable 2-position VRM-300 N

          All products | Equipment for pneumatic valves
          0 €
          A switch bistable 2-position VRM-300 N with short a lever for valve VME. Do mounting required is Adapter VME1-000. color: black.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tee "L" 2x female threadint internal BSP, 1xgwint external BSPT type A13, intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose pneumatic with polyethylene and aluminum for use in pneumatic systems control. very good resistance chemical layer outer allows on operation in environment aggressive chemical. Reinforcement in the molds aluminum coating increases strength hose co allows on assembly long sections without additional brackets. additional its advantage is possession tak called memory shape, enabling assembly in hard reachable places. can work buried without needs use additional covers. thanks to unique construction, hose is about 5 times lighter od standard hoses pneumatic. Inner layer: polyethylene. Reinforcement: aluminum. Outer layer: black polyethylene. Working pressure: from 20 bar to 28.8 bar (depending on the diameter hose). Operating temperature: od -40°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve fast trigger type VSR L in version ended on both sides couplings push-in (line - line), trigger discharged through coupling push-in. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tank filter and filter-regulator for system BIT 1/8" and 1/4". Material: plastic plastic.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Coupling push-in angled 90°, type R4

          All products | Push-in fittings
          0 €
          Coupling push-in angled 90°, type R4, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Adapter with thread external and thread internal BSP type A5/Z, intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Miniature valve reducing angled type RMC (Connection threaded with an O-ring on inlet and coupling push-in at the outlet) thanks to its geometry, ensures parallelism line relative to remaining element installation. range pressure output: 1 ÷ 8 bar. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Silencer with throttling MWSVL with male thread, brass

          All products | Equipment for pneumatic valves
          0 €
          Silencer with throttling MWSVL with thread external used in systems compressed air in order to reducing level noise. reducer noise that can obtain through assembly silencer, measured at pressure supply 5 bar, in distance 1m and under angle 45° od axis silencer, is average depending on size 25 dB. Material: brass nickel-plated, bronze sintered nickel-plated. Operating temperature: od -10°C up to +80°C. Working pressure: 12 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Tee reducing SPEEDFIT, plastic plastic

          All products | Pneumatic piping systems
          0 €
          Tee reducing for system SPEEDFIT used in installations compressed air. The installation can be made with use pipes with plastic or metal (copper, brass, aluminum). Material: plastic plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, very flexible double hose used in systems pneumatic, hydraulic, lines tool, robots industrial, etc. Resistant to abrasion, solvents, fuels, hydrocarbons. Retains flexibility at low temperatures. Hardness per Shore (A): 90°. Hose material: polyurethane PUR (blue + black). Working pressure: from 12 bar to 23 bar (depending on the diameter hose). Operating temperature: od -40°C up to +85°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Set assembly, system BIT

          Accessories for FRL | All products
          0 €
          Set assembly system BIT (2 plate + 2 screws). Material: steel galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-in angled 90° of couplings push-in for hose o diameter metric, series S, type PULM. economical solution for connecting flexible hoses pneumatic o metric calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Adapter with thread external and thread internal BSP type A25, intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Spigot with thread internal for system SPEEDFIT used in installations compressed air. The installation can be made with use pipes with plastic or metal (copper, brass, aluminum). pushing spigot in coupling obtain possibility connecting for installation thread internal. Material: brass. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Spiral protecting FLAMEX PS

          All products | Pneumatic hoses
          0 €
          Spiral protecting FLAMEX PS.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tee plug-in "Y" through-flow, type R23, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Insert filter FP, system BIT

          Accessories for FRL | All products
          0 €
          Insert filter FP, system BIT 1/8" and 1/4". Material: plastic plastic.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A connector electrical 30 mm PIV.B

          All products | Equipment for pneumatic valves
          0 €
          A connector electrical 30 mm standard for valve PIV, for mounting plate. Diameter cable: PG11. color: black or transparent.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Elbow with thread external BSPT type A15 intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Elbow through-flow, type R21

          All products | Push-in fittings
          0 €
          Elbow through-flow, type R21, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Washer wall SPEEDFIT, brass

          All products | Pneumatic piping systems
          0 €
          Washer wall for system SPEEDFIT used in installations compressed air. mounted for a wall Fitting angled 90°. on one side terminated coupling on tube (system SPEDDFIT), on the other side thread internal BSP. Material: brass. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Silencer MWSCQ with male thread, brass

          All products | Equipment for pneumatic valves
          0 €
          Silencer MWSCQ with thread external used in systems compressed air in order to reducing level noise. reducer noise that can obtain through assembly silencer, measured at pressure supply 5 bar, in distance 1m and under angle 45° od axis silencer, is average depending on size 35 dB. Material: brass nickel-plated, bronze sintered nickel-plated. Operating temperature: od -10°C up to +80°C. Working pressure: up to 12 bar.
        Go to Top