- Home
- Pneumatics
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type MRF OFC series COMPACT "O" for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling with thread internal. change setting at use a screwdriver, with the possibility mounting cover protective. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Material: brass nickel-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve reducing REG, series SYNTESI®, without end connections, serves for regulation pressure working and ensures correct operation, in connected za nim installation, independently od changing sie wear medium. W a valve used instead of diaphragm flat diaphragm shaped, which ensures greater value flow nominal thanks to greater surge diaphragm, greater sensitivity and speed reaction on change setting, thanks to reduction friction static and kinetic components and greater accuracy in maintaining set pressure output at change value flow and pressure supply. W case rise pressure output over value setting diaphragm opens valve trigger and vents reducer until for obtaining value pressure compliant with setting. mechanism type „push-lock” allows on locking a knob in any position through its pressing. Plate locking allows mounting padlock protective against unauthorised change setting pressure output. additional the connection with the front and with the back of size 1/8” can be used for connection pressure gauge, relay pneumo-electric or fittings push-in. drawn with these connections air is reduced. Size: SY1, SY2. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: od -10°C up to +50°C. Connection: 1/8" BSP female ÷ 3/8" for SY1 and 3/8" BSP female ÷ 1" for SY2. Additional connection for a pressure gauge or fittings: 1/8" BSP female for SY1 and 1/4" for SY2. Flow rate: 1200 l/min - 1/8", 2800 l/min - 1/4", 3350 l/min - 3/8" (SY1), 5300 l/min - 3/8" (SY2), 7400 l/min - 1/2", 7600 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducer GAR series GA with thread internal BSP, set manually, stays constant value pressure at the outlet, independently od fluctuations pressure against valve. W set found A handle assembly and pressure gauge. Do connecting individual element of each other, serve sets connecting GA (shape L, T, U). Size: 200, 300, 400, 600. Supply pressure: up to 10 bar. Operating temperature: od -20°C up to +70°C. Connection: 1/8" BSP female ÷ 1". Flow rate: 1400 l/min - size 200, 2100 l/min - size 300, 5000 l/min - 400, 6800 l/min - 600 (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee angled "Y", adjustable with thread external, type R25, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control manual, a lever front, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 3/2 - three-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control mechanical, a rod resilient of assist, used most often for control operation actuators. can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet FR+L to connection filter-regulator and lubricator. Filter - reducer consists of standard filter air and valve reducing built-in in one housing. task filter is separation heavier fraction contaminants air using force centrifugal, whereas valve reducing, thanks to diaphragm shaped ensuring maximum sensitivity and precision setting. has additional the connection with the front and with the back enabling connection pressure gauge or fittings for pressure reduced. Grease nipple to most widely used solution ensuring correct lubrication equipment actuating in installations pneumatic. On jej rear and front surface is found also the connection auxiliary for connection pressure gauge, sensor pressure or for additional draw air. Size: SY1, SY2. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 15 bar for SY1, up to 13 bar for SY2, up to 10 bar for trigger RA. Operating temperature: od -10°C up to +50°C. Connection: 1/8" BSP female ÷ 3/8" for SY1 and 3/8" BSP female ÷ 1" for SY2. Filtration grade: 5 µm, 20 µm, 50 µm. capacity bowl oil: 60 cmcm³ - SY1, 130 cm³ - SY2. Additional connection for a pressure gauge or fittings: 1/8" BSP female for SY1 and 1/4" for SY2. Condensate drain: manual /semi-automatic (RMSA), automatic (RA). Flow rate: 1400 l/min - SY1, 4000 l/min - SY2, (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in angled, adjustable triple with thread external, type R52, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with reducer (filter-regulator) FR, series SKILLAIR®, without plates end, is a device consisting of a filter and a reducing valve. It reduces and purifies the air supplied by the compressor. Size: 100, 200, 300. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar, depending on size and kinds trigger. Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1". Pressure gauge connection: 1/8" BSP female. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 1600 l/min - series 100, 3000 l/min - series 200, 5600 l/min - series 300 (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsShears PZP12 or PZG28 for cutting hoses and pipes.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDirectional valve plug-in, type R42, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type MRF HTC series HIGH-FLOW for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. recommended for applications demanding high value flow both during filling as and venting. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting using a knob adjustment and/or a screwdriver; possibility securing setting a lock nut. Size: 1/8″, 1/4″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +50°C. Material: plastic plastic.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCutter for hoses plastic o diameters in the scope 3 ÷ 15 mm. color: black. Material blade: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRegulator MRA series BIT. A version used for regulating pressure in water installations, without secondary venting. Pressure gauge connection: 1/8" BSP female. Output pressure range: 0 ÷ 2 bar, 0 ÷ 4 bar or 0 ÷ 12 bar. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control mechanical, a lever with a roller of assist, used most often for control operation actuators. can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in angled 90° with long spigot, type R47, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBar for parallel mounting lines o various diameters. Material: resin acetal. color black. Operating temperature: od -40°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease nipple (lubricator) series NEW DEAL with connection BSP female, ensures correctness lubrication mist oil equipment in installations pneumatic and is characterized high stability dosing. Supply pressure: up to 18 bar. Operating temperature: up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle series RFL type B, regulating value flow air in obu directions. serves for regulation speed working equipment actuating in systems pneumatic. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: up to +70°C. Material body: aluminum. Material housing: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in angled 90° of couplings push-in for hose o diameter inch, series S, type PULC. economical solution for connecting flexible hoses pneumatic o inch calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter FIL series NEW DEAL recommended for decentralised compressed-air systems or in the immediate vicinity of actuating devices. Thanks to its construction (metal construction) it is characterised by resistance to heavy-duty operating conditions. Intended for use at higher pressures. Size: 1/4", 3/8", 1/2", 3/4", 1". Filtration grade: 4 µm, 20 µm, 50 µm. Supply pressure: up to 18 bar, for trigger RA up to 10 bar. Operating temperature: up to +50°C. Connection: 1/4" BSP female, 3/8", 1/2", 3/4", 1". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 1700 l/min - 1/4", 4100 l/min - 3/8", 1/2", 11000 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsWrench disassembly serving for detachable hoses od lines push-in. intended for series R and RL (FOX). Diameter outer hose od 3 for 10 mm.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA blade spare for shears PZP12 (ZC-PZP12).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight valve foot with cover protective and sockets in plane face, serves for control foot through the operator devices in systems pneumatics. Connection: 1/4". Working pressure: from 2.5 bar to 10 bar. Operating temperature: -10°C up to +60°C. Flow rate nominal: 840 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBody elbow BANJO, type R28, for bolts series D, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve reducing REG, series SYNTESI®, with end connections 1/8" ÷ 1", serves for regulation pressure working and maintaining go on fixed level, ensuring correct operation, in connected za nim installation, independently od changing sie wear medium. W a valve used instead of diaphragm flat, diaphragm shaped, which ensures greater value flow nominal thanks to greater surge diaphragm, as well as greater sensitivity and speed reaction on change setting, through reduction friction static and kinetic components and greater accuracy in maintaining set pressure output at change value flow and pressure supply. W case rise pressure output over value setting diaphragm opens valve trigger and vents reducer until for obtaining value pressure compliant with setting. mechanism type „push-lock” allows on locking a knob in any position through its pressing. Plate locking allows mounting padlock protective against unauthorised change setting pressure output. additional the connection with the front and with the back, can be used for connection pressure gauge, relay pneumo-electric or fittings push-in. drawn with these connections air is reduced. Size: SY1, SY2. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar, depending on size. Operating temperature: od -10°C up to +50°C. Connection: 1/8" BSP female ÷ 1". Additional connection for a pressure gauge or fittings: 1/8" BSP female for size SY1, 1/4" BSP female for size SY2. Flow rate: 1200 l/min - 1/8", 2800 l/min - 1/4", 3350 l/min - 3/8" (SY1), 5300 l/min - 3/8" (SY2), 7400 l/min - 1/2", 7600 l/min - 3/4" and 1" (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with reducer (filter-regulator) FR, series SKILLAIR®, is a device consisting of a filter and a reducing valve. It reduces and purifies the air supplied by the compressor. Size: 300. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 13 bar, depending on kinds trigger. Operating temperature: up to +50°C. Connection: 1/2" BSP female ÷ 1". Pressure gauge connection: 1/8" BSP female. Condensate drain: manual / semi-automatic (RMSA), automatic (RA, SAC). Flow rate: 5600 l/min at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsComplete Tee plug-in BANJO, double, type R57, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off alloy series STP-B of couplings push-in used mainly as valve safety. Po mounting on connections supply actuator allows on Flow rate air only in the presence pneumatic signal control. actuator is stopped po a drop pressure control. Working pressure: 0.5 ÷ 10 bar. Operating temperature: od -10°C up to +60°C. Body material: brass nickel-plated. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic trigger condensate series NEW DEAL. Working pressure: 10 bar. Operating temperature: up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTiming element, which function is achieving delay for signal pneumatic. value delay signal output sets through knob regulating. value maximum delay can be increased through connection additional bowl external. built-in indicator pressure and coupling push-in under line 4 mm. assembly in any position. Material: body - aluminum anodized/plastic plastic, element internal: brass/plastic plastic, sealing - NBR. Operating temperature: od -10°C up to +60°C. Working pressure: 2.5 up to 8 bar. Flow rate nominal: 100 Nl/min for 6 bar at a drop pressure 1 bar. range set delay: 0 for 30s at 6 bar. time resetting signal: <0.1s. repeatability: +/-0.4 s.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee plug-in "Y" with spigot, type R24, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsWrench disassembly serving for detachable hoses od lines push-in. intended for series R. Diameter outer hose od 4 for 14 mm.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease nipple compressed air series BIT with connection BSP female ensures correctness lubrication mist oil equipment in installations pneumatic and is characterized high stability lubrication. especially recommended for use at low values flow. Size: 1/8", 1/4". capacity bowl: 26.5 cm³. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Connection: 1/8" BSP female, 1/4". Flow rate: 710 l/min - 1/8", 1/4" (at an inlet pressure of 6 bar and Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control pneumatic, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/2 - five-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee plug-in "T", adjustable with thread internal, type R35/F, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type MRF NTV series COMPACT "N" for mounting in connections valves directional, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting using a knob adjustment and/or a screwdriver; possibility securing setting a lock nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +50°C. Material: plastic plastic.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off V3V manual with a lock, series SKILLAIR®, without plates end. task its is separation the system working od air supply. is to valve normally closed, three-way. W position closed cuts off air supply simultaneously venting configuration, co makes go especially useful during work service. W position rest (closed) can be closed on a padlock co secures valve against switching on through unauthorised persons. Size: 100, 200, 300. Supply pressure: up to 15 bar (depending on size). Operating temperature: up to +50°C. Flow rate nominal: depending on size for 4700 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter accurate DEP series SYNTESI®, without connections end, serves for removal with high accuracy contaminants liquid or solid, contained in compressed air. high accuracy filtration obtained is through use special element filtering called „an insert coalescing”. Size: SY1, SY2. Filtration grade: 0.01 µm - Class purity air acc. to ISO 8573-1: 1-7-2. Supply pressure: up to 15 bar - size SY1, up to 13 bar - size SY2. Operating temperature: od -10°C up to +50°C. Condensate drain: manual / semi-automatic (RMSA). Flow rate recommended: 460 l/min - size SY1, 620 l/min - size SY2 (at pressure 6.3 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee plug-in "T" with spigot, type R48, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.


















































