Very flexible and at the same time light hose suction-delivery intended for water, juices, drinks, alcohols o a concentration up to 20% and other products food. not advisable for greasy substances such as milk czy oils. resistant to vacuum and kinking thanks to embedded spiral with wire steel in wall hose. high advantage its is both transparent wall resistant to radiation UV, allowing on easy visual control of the flow media, as well as smooth jej internal parts reducing losses flow and ensuring ease cleaning. W ratio for hose ARMORVIN HNA is characterized greater pressure working and greater resistance on vacuum. W use not regarding direct contact with food (in industry, construction, agriculture) It can be used: 1) for light chemicals, water, sludge and sewage, other liquids (without fat, oils and hydrocarbons); 2) for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (not greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. as hose reinforced spiral steel (without braid) is characterized a certain elongation under pressure, co should take into account in use, especially in elevated temperatures. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Hose material: light green transparent PVC. Reinforcement: galvanised steel spiral. Working pressure: from 2 bar to 8 bar, depending on the diameter hose. Operating temperature: od -5°C up to +65°C.

Strong hose suction - delivery intended for conveying substances food, demanding use rubber free of odour and taste. Contains no phthalates or bisphenol A. thanks to reinforcement spiral steel, has good resistance to vacuum. Suitable for milk and dairy products, as well as wine, beer, fruit juices. not recommended for oils and greasy substances food. Widely used in industry food. Layer outer hose resistant to abrasion and conditions atmospheric. Standards and requirements: Food industry, food contact: 1935/2004/EC and 2023/2006/EC (GMP). D.M. 21/03/73, FDA 21 CFR 177.2600, BfR XXI kat. 2. Inner layer: white rubber natural (NR). Reinforcement: cord synthetic, steel spiral. Outer layer: blue EPDM rubber. Working pressure: 6 bar. Operating temperature: od -25°C up to +80°C.

Light and flexible hose suction-delivery intended for water, juices, drinks, beer, wine, alcohols o a concentration up to 20% and other products food. not recommended for milk and its dairy products, oils and greasy substances food. Reinforcement spiral with hard PVC, resistant on impact, ensures good strength on vacuum and kinking hose. transparent wall allows on easy visual control of the flow. A smooth inner surface reduces flow losses and ensures ease of cleaning. surface outer lightly corrugated. W use not regarding direct contact with food (in industry, construction, agriculture) It can be used both for light chemicals, water, sludge and sewage, other liquids (without fat, oils and hydrocarbons), as and for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (not greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. Available in version antistatic LUISIANA AS - has additional copper cable built-in in Material hose parallel for spiral, PVC, co po connection ends cable for installation and earthing ensures discharge charges electrostatic. version ta Available is on special order, example index version antistatic: e.g. ME-LUISIANA-AS-050. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Hose material: transparent yellowish PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 2 bar to 8 bar, depending on the diameter hose. Operating temperature: od -5°C up to +60°C.

Exceptionally pliable and flexible hose suction-delivery intended for conveying substances food, demanding use rubber free of odour and taste. Contains no phthalates or bisphenol A. Suitable for milk and dairy products, as well as wine, beer, fruit juices. not recommended for oils and greasy substances food. commonly used in road tankers for handling milk. Due to high flexibility It can be used for hose reels drum. Layer outer hose resistant to abrasion and conditions atmospheric. Standards and requirements: Food industry, food contact: 1935/2004/EC and 2023/2006/EC (GMP), D.M. 21/03/73, FDA 21 CFR 177.2600, BfR XXI kat. 2. Inner layer: white rubber natural (NR). Reinforcement: cord synthetic, steel spiral. Outer layer: blue EPDM rubber. Working pressure: 6 bar. Operating temperature: -25°C up to +80°C.

Flexible hose suction-delivery intended for conveying substances food, pharmaceutical and cosmetic: water, juices fruit, beer, wine, vinegar, alcohols o a concentration up to 96%, milk and its dairy products, creams, soaps, substances aromatic, pigments and other. Resistant to fats and oils within the standard range of use. Good chemical resistance to light chemicals – acid and base solutions. extruded, completely smooth surface inner and outer hose facilitates Flow rate and cleaning. Reinforcement spiral with stainless wire steel, embedded in wall with TPE-S, makes go resistant to vacuum and kinking. transparent wall allows on easy visual control of the flow. The hose material is not vulcanised, is clean (contains no vulcanising additives), resistant to hydrolysis, does not promote bacterial growth, with low porosity and low permeability. Completely neutral in taste and odour, does not change the organoleptic properties of the medium. resistant to aging, conditions atmospheric and radiation UV. Cleaning by the SIP method, which noticeably shortens the service life, is not recommended. use for high-proof alcohol (its vapours or other flammable substances) requires taking into account hazards associated with electricity static. as hose reinforced only spiral (without braid) is characterized a certain elongation under pressure, therefore maximum pressure working hose is low (factor safety 1:5). Cleaning, disinfection or sterilisation of the hose must be carried out strictly according to the recommendations given in the catalogue sheet below. standards and requirements : 1) industry food, contact with food: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C, D1, D2), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 „e”. 2) Pharmaceutical industry: USP CLASS VI. Hose material: transparent TPE-S. Reinforcement: spiral of steel AISI 302. Working pressure: from 1 bar to 1.5 bar, depending on the diameter hose. Operating temperature: -30°C up to +100°C.

Strong hose suction - delivery, o thick wall, intended for conveying substances food demanding use rubber free of odour and taste. Contains no phthalates or bisphenol A. hose specially designed for conveying oils and fats. Widely used in industry oil and fat. Layer outer resistant to fat and aging. standards and requirements : industry food, contact with food 1935/2004/EC and 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, D.M. 21/03/73. Inner layer: white NBR rubber/PVC. Reinforcement: two layer cord synthetic, steel spiral. Outer layer: blue, smooth rubber CR. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: -15°C up to +90°C.

Light, soft and flexible, easy in handling hose delivery intended for conveying substances food, demanding use rubber free of odour and taste. Contains no phthalates or bisphenol A. Suitable for milk and dairy products, as well as wine, beer, fruit juices. not recommended for oils and greasy substances food. Layer outer hose resistant to abrasion and conditions atmospheric. standards and requirements : industry food, contact with food 1935/2004/EC and 2023/2006/EC (GMP), D.M. 21/03/73, FDA 21 CFR 177.2600, BfR XXI kat. 2. Inner layer: white rubber natural (NR). Reinforcement: cord synthetic. Outer layer: blue EPDM rubber. Working pressure: 6 bar. Operating temperature: od -25°C up to +80°C.

Light, very flexible pressure hose delivery intended for conveying water, juices, drinks and other products food in temperature up to +40°C. no phthalates in material hose recommends go for conveying milk and its dairy products and alcohols o a concentration up to 50% and temperature up to +40°C. not recommended for oils and greasy substances food. used also widely in industry and laboratories for compressed air, gases, light chemicals. Reinforcement a braid spiral ensures high strength pressure and low deformation hose under pressure also at pulsations pressure (in the scope pressure working). Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: a polyester braid. Working pressure: from 9 bar to 27 bar, depending on the diameter hose. Operating temperature: od -15°C up to +60°C.

Strong hose delivery, o thick wall, intended for conveying substances food demanding use rubber free of odour and taste. Contains no phthalates or bisphenol A. hose specially designed for conveying oils and fats. Widely used in industry oil and fat. Layer outer in fully resistant to fat and aging. standards and requirements : industry food, contact with food 1935/2004/EC and 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, D.M. 21/03/73. Inner layer: white NBR rubber/PVC. Reinforcement: two layer cord synthetic. Outer layer: blue rubber CR. Working pressure: 10 bar. Operating temperature: -15°C up to +90°C.

Hose suction-delivery for demanding, versatile applications in industry food. excellent for conveying many types products food such as: olive oil, wine, beer, juices fruit, milk, fats and alcohols o a concentration up to 96%. The inner layer is free of phthalates, plasticisers and components of animal origin. Contains no phthalates or bisphenol A and no polycyclic aromatic hydrocarbons (PAH Free), in accordance with ZEK 01.4-08 Cat.1. Tested for the presence of heavy metals. Layer outer resistant to conditions atmospheric and ozone. thanks to external corrugation hose is exceptionally pliable and flexible. recommended way mounting with fitting are special clamp shell EASY SHELL, o shape adapted for serrated hose. standards and requirements : industry food, contact with food 1935/2004/EC and EC 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, BfR XXI kat. 2, D.M. 21/03/73, 3-A Sanitary Standard 18-03 class II. Inner layer: white, smooth synthetic rubber. Reinforcement: cord synthetic, spirals steel. Outer layer: blue synthetic rubber. Working pressure: 10 bar. Vacuum: 0.6 bar. Operating temperature: od -30°C up to +100°C.

Hose intended for conveying cold water potable (+23°C - approvals KTW, DVGW - Germany, WRAS – Great Britain, D.M.174 – Italy) in industry and in use such as households domestic, campsites etc. Material layer internal o quality food, free of odour and taste ensures retention unchanged properties organoleptic water. free of phthalates. Layer outer resistant to conditions atmospheric. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) approval for water potable: UBA-Leitlinie, KTW, DVGW W270, D.M.174, WRAS in accordance with BS 6920. 3) industry food, contact with food: 1935/2004/EC, 2023/2006/EC (GMP); 21CFR 177.1520, BfR III, 10/2011/EU (Layer inner). Inner layer: white plastomer. Reinforcement: a synthetic braid. Outer layer: blue synthetic rubber. Working pressure: 20 bar. Operating temperature: -30°C up to +60°C.